21 September 2021 in IEEE Transactions on Power Electronics
Piezoelectric components offer several potential advantages to power conversion including high power density and efficiency capabilities compared to magnetics at small scales. Converter architectures have been developed for efficient utilization of piezoelectrics, but without fundamental criteria for designing the piezoelectric components themselves. In this article, we derive figures of merit for the achievable efficiencies and power handling densities of piezoelectric materials and vibration modes based on realistic utilization in a power converter. These figures of merit are likewise accompanied by geometry conditions that serve as guidelines for high-efficiency high-power-density piezoelectric resonator design. We demonstrate use of these metrics to evaluate commercially available PZT and lithium niobate materials across seven vibration modes, and we validate the figures of merit and geometry conditions with numerical solutions of converter operation and experimental results. The proposed figures of merit are concluded to be highly representative metrics for the capabilities of piezoelectrics in power conversion, and these capabilities are shown to have favorable scaling properties for converter miniaturization.
28 October 2022 in IEEE Transactions on Power Electronics
Piezoelectric components hold promise for realizing power conversion with unprecedented levels of power handling density at small size scales. Dc-dc converter topologies and operating modes have recently been established for high-efficiency utilization of piezoelectrics, and strategies for piezoelectric material selection and component design have likewise been identified for high-performance power conversion. In this letter, we apply these developments to experimentally demonstrate the extraordinary power density capabilities of piezoelectrics. This 275–150 V, 12 W prototype achieves a piezoelectric resonator power handling density of 1.01 kW/cm $^{3}$ at 493 kHz, greatly exceeding the densities of previous designs and validating the significant miniaturization potential of piezoelectrics for power conversion.
10 May 2018 in IEEE Transactions on Industrial Electronics
We present the design of a novel low-noise high-force linear motor for precision positioning applications such as in semiconductor lithography. The paper presents new magnetic designs to achieve low noise and vibration by reducing high spatial-frequency magnetic field components, which cause harmonic vibrations of a moving stage. To reduce such force harmonic content, our new motor has fine teeth, narrow slots with high slot aspect ratio, five phases, and a moving skewed Halbach magnet array. As compared with a commercially-available iron-core motor, in our new design the acoustic noise level in Pascals is reduced by more than 90 %, corresponding to a 20 dB reduction in sound pressure level, even with a non-skewed magnet array. Using a skewed magnet array, the cogging-driven and velocity-dependent noise is further reduced by 90 % in Pascals. This new linear motor simultaneously is capable of very high shear force densities in order to support high-acceleration motions, and thus provides new options for high-performance and quiet linear motion devices.
15 February 2022 in IEEE Transactions on Industrial Electronics
Ultrathin, lightweight, high-performance, low- cost, and energy-efficient loudspeakers that can be deployed over a wide area have become increasingly attractive to both traditional audio systems and emerging applications such as active noise control and immersive entertainment. In this article, a thin-film loudspeaker is proposed based on an active piezoelectric layer embossed with an array of microscale domes. Actuation of these freestanding domes contributes to excellent sound generation by the loudspeaker, for example, 86 dB sound pressure level at 30-cm distance with 25-V (rms) excitation at 10 kHz, regardless of the rigid surface on which it is bonded. The acoustic performance is further tunable by designing the dome dimensions. The proposed loudspeaker also exhibits high bandwidth, which extends its prospects into the ultrasonic range. The loudspeaker weighs only 2 g, is 120 μ m thick and can be manufactured at low cost. These advantages make the proposed loudspeaker a promising candidate for ubiquitous applications in existing and emerging industrial and commercial scenarios.
16 November 2021 in IEEE Journal of Emerging and Selected Topics in Power Electronics
The drive to miniaturize power electronics motivates investigation into alternative passive component technologies such as piezoelectrics, which offer fundamentally higher power density and efficiency capabilities at small scales compared to magnetics. Piezoelectric transformers (PTs) have seen application in dc-dc converters, but these designs typically require additional magnetics for competitive efficiency. In this work, we systematically enumerate isolated and non-isolated dc-dc converter topologies and switching sequences capable of efficiently utilizing PTs as their only energy storage components. The proposed switching sequences maintain high-efficiency behaviors (e.g., zero voltage switching (ZVS), all-positive instantaneous power transfer, and minimal charge circulation) across wide voltage gain and load ranges. We present techniques for deriving these switching sequences’ ZVS regions, estimating PT efficiency, and solving for periodic steady state switching times; these offer insights for comparing and implementing design options. We then verify our analyses in a 180-500 V experimental prototype based on a commercially-available PT, which demonstrates significant efficiency gain through a proposed implementation.
18 March 2022 in IEEE Journal of Solid-State Circuits
This article presents a duty-cycled integrated-fluxgate (IFG) magnetic-to-digital converter for contactless current sensing. While previous works have proven high linearity, low noise, and low offset capabilities of fluxgate sensing, this work focuses on low energy operation. The mixed-signal front-end design enables energy-efficient duty cycling with a 13-bit digital integrator to retain the last converged output during sleep mode and resume searching in its vicinity upon wake up. The system achieves a ±2.4 mT measured range of magnetic fields for indirect current measurement. The hierarchical search modes achieve 10x faster convergence than analog implementations. The faster readout with a peak sampling rate of 770 kS/s translates to lower compensation energy per sample. The 3-dB bandwidth of 125 kHz is 67% higher than prior IFG art, with competitive 500-nT rms noise. The test chip fabricated in 250-nm CMOS technology consumes the lowest power of known IFG works. It can be duty-cycled to save energy in low-bandwidth applications or run at peak bandwidth for low latency.