1 April 2021 in Ventilation, Illumination and Heat Gas Supply
Система обліку природного газу на даний час є недосконалою та не дає необхідну точність при визначенні обсягів спожитого газу. Проведено аналіз складу газу в місці його видобування, враховано дані оператора газотранспортної системи та експериментальні дані, що отримані при дослідженні властивостей газу в Інституті газу Національної академії наук України. Отримано значні розбіжності, що підтверджують факт істотної зміни як складу газу, так і його енергетичної цінності при відборі в різних точках газової мережі. Враховуючи світові тенденції, єдиний енергетичний ринок і курс України в європейські структури, надзвичайно актуальним є перехід обліку газу з метричних одиниць до енергетичних. Розроблена схема вдосконалення процесу диспетчеризації обліку природного газу для вимірювання його кількості в одиницях енергії. Ця схема передбачає здійснення обліку газу з місця його видобутку до споживача саме в енергетичних одиницях. Також така схема дозволить достатньо точно визначати місця можливих витоків і втрат газу в мережах населених пунктів та отримати реальне добове балансування газу з урахуванням його змінної енергетичної цінності.
1 July 2021 in Ventilation, Illumination and Heat Gas Supply
In the gas supply system of Ukraine, gas appliances of domestic production are simultaneously operating, the manufacture of which took into account the requirements for parameters in our country and appliances manufactured in the countries of the European Union, where the requirements for the characteristics of gas are somewhat different. The first devices require a pressure of 1200-1300 Pa to ensure an optimal combustion process, and the second 2000-2500 Pa. The permissible minimum pressure in the distribution network can be significantly lower than required by gas equipment. Pressure control actually allows you to influence the efficiency of the gas combustion. A study of the change in the gas flow rate and the time of its combustion when heating a fixed volume of water at different pressures has been carried out. The study was carried out on household stoves from different manufacturers. The pressure range was from 1800 to 2600 Pa. The coefficients of change in the efficiency of gas use (δ) during the operation of the devices, depending on the pressure in front of the burners, have been determined. Based on the analysis of the results obtained, the optimal pressure was determined to be 2400 Pa. In this case, the minimum efficiency occurred at a pressure of 1800 Pa (deviation by 40%). At pressures of 2000 and 2500 Pa, on average, the deviation of the efficiency was 20%. The dependence of gas consumption on the intensity of its combustion was also analyzed. The experiments were carried out at constant pressure on burners of different power. It has been determined that when using a burner with a minimum power, the volume of gas used is reduced by 1,3 times with an increase in the heating time by about two times in comparison with a burner with a maximum power.
21 June 2026 in Ventilation, Illumination and Heat Gas Supply
22 June 2025 in Ventilation, Illumination and Heat Gas Supply
The reliability of Ukraine's gas supply systems is decreasing due to the wear and tear of a significant part of gas pipelines and equipment, and destruction due to shelling of gas transportation and gas distribution networks and equipment on them. Normative documents determined the procedure for operating the gas supply system in standard and complex engineering and geological conditions, with full filling of the staff list of enterprises. However, the procedure for operation in the conditions of active hostilities conducted in the area of operation of the network is not described. Due to the increase in the volume of work and the simultaneous decrease in the number of employees, the specific workload on gas utility employees is sharply increasing. Workers are forced to solve work issues that were previously performed by related services. Currently, there are not enough regulatory documents that would regulate the maintenance and repair of gas networks in conditions of damage and destruction that occur in Ukraine. The paper proposes a number of measures to organize the safe performance of high-risk work at gas industry enterprises. It is necessary to review the requirements for the qualification level of work performers during military operations while ensuring enhanced control by managers of gas-hazardous work and experienced team members. To conduct extra-ordinary training of employees on the rules of safe conduct of gas-hazardous and emergency work in the conditions of military operations. Develop training programs for performing high-risk work for specialists with education in related fields.
30 October 2026 in Ventilation, Illumination and Heat Gas Supply
This study substantiates the potential use of hydrogen–natural gas blends as an alternative gaseous fuel in heat and gas supply systems. The current regulatory framework does not provide sufficiently clear provisions regarding the permissible hydrogen content in blends with natural gas transported through gas distribution networks. In particular, the Technical Regulation provides for the use of hydrogen in gas blends at concentrations of up to 5 %. The study substantiates the limiting hydrogen concentrations in hydrogen–natural gas blends at which the physicochemical properties of the gaseous fuel comply with regulatory requirements, fuel interchangeability is maintained, and stable and safe combustion is ensured. Three ranges of hydrogen content in gas blends are proposed: up to 7 %, 7–20 %, and above 20 %. The main physicochemical properties of natural gas–hydrogen blends are analysed. Quantitative relationships between the hydrogen volume fraction and the lower heating value, density, and Wobbe Index of the gas blend are established. Critical parameter values beyond which regulatory requirements for gaseous fuel quality and operating conditions are no longer met are also identified. Recommendations are developed regarding the permissible hydrogen content in natural gas, taking into account the operating conditions of existing gas distribution systems. The limitations and conditions for the safe operation of gas appliances using hydrogen–natural gas blends are identified. The need to update the technical standards and regulatory framework in view of the prospective integration of hydrogen into heat and gas supply systems is substantiated. Technological schemes for the transmission and distribution of hydrogen–natural gas blends are developed and recommended for use in the design and modernisation of gas networks.
30 December 2024 in Eastern-European Journal of Enterprise Technologies
The object of this study is a gas mixture of natural gas and hydrogen. The physical and chemical parameters of fuel mixtures of natural gas with hydrogen have been investigated with the aim of further regulating the hydrogen content in the gas transmission system in accordance with the state standards of Ukraine and the European Union. The task addressed was the safe use of green hydrogen in a mixture with natural gas. The permissible hydrogen content in municipal network gas was established at 7 mol %, which would allow efficient and safe use of existing gas transmission systems. Currently, a 4 % increase in pressure is recommended for low-pressure networks. This is because the calorific value of natural gas is regulated by the Code of Gas Transmission and Distribution Systems and must be within certain limits, and compliance with this particular hydrogen content in natural gas allows this indicator to be kept within the normal range. The 4 % increase in pressure is due to the preservation of the thermal power of gas burners when one gaseous fuel is replaced by another. The content of the mixture of combustible gases at the lower and upper flash points was analyzed. It was found that at 7 % hydrogen content, the flash point range is 5.07–16.75 vol %, which is within the permissible range of 5–15 vol %. With an increase in the hydrogen content of the gas, an explosion may occur in a wider range of concentrations and require additional safety measures. The defined hydrogen limit does not affect the explosiveness of network gas and ensures the safety of its use since the lower concentration limit of flammability (in terms of methane) in a mixture with air in volume percentage is 4.4, and the upper limit is 17.0 vol % according to Annex 2 of the technical regulations