This study focuses on natron glass, dated from the 1st to 5th century AD, excavated in different areas of the Roman Empire. The eastern side of the Roman Empire is accounted for by three archaeological sites, Petra and Barsinia, both in Jordan, and Gonio, in Georgia. The Italian peninsula is represented by the Iulia Felix and Embiez shipwrecks, and by samples from Augusta Praetoria. Samples from Barcino in Spain are examples of the western side of the Empire, and the sites of Tienen and Oudenburg represent the northern provinces. No clear distinctions in glass composition and origin between the different regions of the Roman Empire can be made based on the major elemental compositions. However, the western, central and eastern Roman Empire samples can be divided into two groups, coloured and colourless, which also are reflected in the K2O contents. Sr–Nd isotopes, used for provenancing geological raw materials in primary glass production, indicate an eastern Mediterranean origin (εNd between −2.5 and −6.0) for most of the samples. Conversely, samples with more negative εNd, between −7.02 and −10.8, indicate a western Mediterranean origin. By applying this technique on samples from well known archaeological contexts, this study demonstrates that several primary glass factories were located throughout the Roman Empire. This is in contrast with current interpretations of late Roman to early Byzantine data.
Handheld X-ray fluorescence spectrometry (XRF) has seen a dramatic increase in use for archaeological projects. The attraction of the technique is its portable and nondestructive nature. In many cases, the archaeological artefacts in question cannot be destructively sampled, or the piece itself cannot be sent to an analytical laboratory. One of the current research interests associated with the Sagalassos project is the study of the Roman iron industry. Previously exported iron slag and ore from the site and the surrounding area was subjected to laboratory chemical analyses. These indicated that different ores were being utilized in the production of iron in different periods. In order to further the project the slag material still in the site depot needed to be analyzed. However, recent legislative changes mean that materials can only be analyzed on-site. Since samples could not be taken and destructive chemical analysis was no longer feasible, a portable, nondestructive technique was required. Handheld XRF can easily provide qualitative data, but these data are only comparable to other handheld XRF qualitative data, from the same device. Quantitative data gathering is possible, but can be more problematic, particularly when the material in question is heterogeneous in nature. A calibration file was created using the manufacturer’s software and “in-house” standards made from the pre-quantified samples of iron slag available in the laboratory. In order to make the calibration as robust as possible, the composition of the standards was analyzed statistically to determine which of these created bias and leverage for specific elements. These standards were then omitted from the calibration for that element. The calibration was tested in the laboratory using samples of iron slag previously analyzed with wet chemistry, and the results indicated that most sample analyses showed 30% error were found in samples which contained very low or very high quantities of the analyzed element, i.e., outside the limits of the calibration. The handheld XRF and the associated calibration file were then used to provide a semi-quantified chemical characterization of the samples in the field depot.
1 August 2018 in Journal of Archaeological Science: Reports