31 December 2024 in Measurement
21 October 2024 in IEEE Sensors Journal
The equivalent circuit is a commonly used tool for performance analysis during CMUT design and optimization. In this study, the immersion equivalent circuit model of square CMUT array is established for the first time. Using this model, the vibration, electrical, and acoustic characteristics of square CMUTs can be rapidly analyzed. Consequently, it can replace the time-consuming finite element model for design and optimization. For comparison with the equivalent circuit model presented in this paper, the finite element model of the square CMUT array was established by COMSOL 6.0a. The theoretical calculation results of the equivalent circuit model are highly consistent with the FEM results. Finally, a 28×28 CMUT array composed of square cells was fabricated using the wafer bonding process, and its vibration and impedance characteristics were tested using a Laser Doppler Vibrometer and an impedance analyzer. All experimental results well verified the accuracy of the proposed equivalent circuit models.
14 February 2025 in Measurement Science and Technology
As a quintessential electrostatic excitation micro electro mechanical system device, the capacitive micromachined ultrasonic transducers (CMUTs) is extensively utilized across medical, industrial, military and numerous other fields. To comprehensively analyze the fundamental properties of CMUTs, it is imperative to investigate their precise mechanical behavior under electrostatic forces. When the fringing field effect of the CMUT is ignored, this manuscript introduces the electromechanical coupling model of the partially center electrode-covered CMUTs (PCEC-CMUTs) to analyze its fundamental properties under nonlinear electrostatic forces for the first time. Utilizing the Ritz method, a novel segmentation function is employed to express the electrostatic deflections of the PCEC-CMUTs. Through the solution results of this model, fundamental performance parameters such as collapse voltage, electrostatic deflection and resonant frequency can be rapidly obtained. Subsequently, the finite element model (FEM) with COMSOL 6.1a is used to validate the theoretical model. The relative errors of electrostatic deflections and resonant frequency between the theoretical model and the FEM are controlled less than 5% in the region less than 95% of the collapse voltage, which proves the correctness of the theoretical model. These theoretical analyses are instrumental for the design and optimization of electrostatically actuated micro-devices such as CMUTs, and provide a theoretical foundation for establishing immersion equivalent circuits for PCEC-CMUT cells and arrays.
30 January 2026 in IEEE Sensors Journal
The capacitive micromechanical ultrasonic transducer (CMUT) has several advantages, including a compact size, high precision, and a high electromechanical coupling coefficient, making it widely utilized in flow detection, ultrasonic imaging, biochemical material detection, and other applications. To effectively capture these remarkable advantages, an equivalent circuit model is frequently established to analyze the fundamental performance characteristics of the CMUT. In this manuscript, the immersion equivalent circuit model of the partially center electrode-covered circular CMUT (PCEC-CMUTs) is established. Based on the established model, the vibration, electrical, and acoustic characteristics of the PCEC-CMUTs can be rapidly and accurately determined. Concurrently, a finite element model (FEM) is developed using COMSOL 6.0a to verify the accuracy of the established model and ensure computational precision. The average vibration velocity, resonant frequency, impedance characteristics, and output pressure distribution showed excellent agreement, further validating the accuracy of the theoretical model. When the electrode coverage ratio (Mr) varies within the range of 0.1 to 0.9 and the bias voltage percentage changes between 10% and 90%, the relative error of the resonant frequency remains below 5%.