1 December 2020 in IEEE Microwave and Wireless Components Letters
This letter presents an efficient single-cell triband rectifier matched at millimeter-wave frequencies of 24, 28, and 38 GHz using a novel, compact multiband impedance matching network (IMN). The proposed multiband IMN is scalable and is used to design a miniaturized rectifier at the desired frequencies. The actual impedance of rectifier was measured using through-reflect-line (TRL) calibration for accurate design. A prototype of rectifier was realized on Rogers 5880 substrate. The rectifier is capable of harvesting dc output simultaneously from three different millimeter-wave frequency bands including two 5G communication bands and industrial, scientific and medical (ISM) band at 24 GHz. The maximum simulated efficiencies obtained at 24, 28, and 38 GHz are 44.3%, 42.7%, and 43.6% at an input power of about 15.6 dBm and the measured efficiencies are 44%, 41.3%, and 39.7% at an input power of 17.5 dBm, respectively. This rectifier finds its applications as an energy harvester and wireless power transmitter for self-sustainable low-power batteryless systems.
27 November 2024 in IEEE Journal of Solid-State Circuits
Guessing random additive noise decoding (GRAND) has enabled the practical implementation of maximum likelihood (ML) or near-ML decoding, shifting the paradigm of code-specific decoder design to a code-agnostic decoding architecture. Ordered reliability bits GRAND (ORBGRAND) is a soft-detection variant of GRAND that uses soft information to guide its query order to significantly improve the decoding performance. This work presents the first-integrated energy-efficient hardware implementation of ORBGRAND to achieve ultra-low energy (sub-pJ/bit) and power consumption (5 mW) while using a small core area of 0.4 mm 2 in 40-nm CMOS. The proposed architecture enables dynamic power savings by implementing an efficient sorter that allows the decoder to use the sorted bits immediately without waiting for the entire list to be sorted and an efficient landslide unit that generates noise effect sequences in parallel. The chip is implemented in 40-nm CMOS with a re-configurable architecture that enables decoding of any binary linear code from 32 to 256 bits of code length and 0.8–1 code rate. For a code length of 256 bits and a code rate of 0.94, it provides a measured energy consumption of 0.76 pJ/bit and power consumption of 4.9 mW from a 1.0-V supply voltage at an operating frequency of 90 MHz providing a throughput of 6.5 Gb/s and a latency of 40 ns at a targeted frame error rate (FER) of 10 -7 .
25 August 2022 in IEEE Journal of Solid-State Circuits
This article presents a highly miniaturized ingestible electronic capsule for biochemical detection via onboard genetically engineered biosensor bacteria. The core integrated circuit (IC) is a threshold-based bioluminescence detector with a CMOS-integrated photodiode array in a 65-nm technology that utilizes a dual-duty-cycling front end to achieve low power consumption. The implemented IC achieved 59-nW active power consumption, 25-fA/count resolution, and a 59-fA minimum detectable signal (MDS) using a calibrated optical source. The IC was then integrated with other system components into a battery-powered wireless ingestible capsule measuring just 6.5 mm thick $\times $ 12 mm diameter. We demonstrated successful detection of low-intensity bioluminescent signals from bioengineered bacterial sensors when exposed to the intestinal inflammation biomarker tetrathionate in vitro. Together, the IC and mm-scale smart pill systems demonstrate high sensitivity with low-power multiplexed measurement capability suitable for noninvasive disease diagnosis and monitoring in the gastrointestinal (GI) tract.
16 February 2022 in bioRxiv
Transient molecules in the gastrointestinal (GI) tract, such as nitric oxide and hydrogen sulfide, are key signals and mediators of inflammatory bowel disease (IBD). Because these molecules are extremely short-lived in the body, they are difficult to detect. To track these reactive molecules in the GI tract, we have developed a miniaturized device that integrates genetically-engineered probiotic biosensors with a custom-designed photodetector and readout chip. Leveraging the molecular specificity of living sensors, we genetically encoded bacteria to respond to IBD-associated molecules by luminescing. Low-power electronic readout circuits (nanowatt power) integrated into the device convert the light from just 1 μL of bacterial culture into a wireless signal. We demonstrate biosensor monitoring in the GI tract of small and large animal models and integration of all components into a sub-1.4 cm 3 ingestible form factor capable of supporting wireless communication. The wireless detection of short-lived, disease-associated molecules could support earlier diagnosis of disease than is currently possible, more accurate tracking of disease progression, and more timely communication between patient and their care team supporting remote personalized care.
26 May 2025 in IEEE Transactions on Circuits and Systems I: Regular Papers
A fully integrated hardware design of the universal maximum likelihood Guessing Random Additive Noise Decoding (GRAND) algorithm implemented in 40 nm CMOS is presented. It is shown how this integrated hard-detection decoder, which is designed to process component codes of up to 128 bits in length, can be extended to efficiently decode product codes as long as 16,384 bits using the Iterative GRAND (IGRAND) algorithm. Pipelined stages provide throughput gain and dynamic energy savings when channel noise conditions improve. The chip allows for decoding product codes with two distinct component codes due to its ability to interleave between two codebooks without any switch-over time. Measurements demonstrate the decoder’s accuracy and efficiency in decoding a broad selection of product codes, including the capacity-achieving random linear product codes. The chip consumes an average energy of 30.6 pJ/b with a latency of 1.04 μs when decoding the BCH(127,106,7) component code at 68 MHz from 1.1 V at a bit flip probability of 10-5. Using a single chip to decode a BCH(127,106,7)2 product code which results in 16,129-bit code of rate 0.68, we demonstrate an average energy consumption of 61.2 pJ/b with an average latency of 265 μs for the same operating conditions.