20 November 2020 in Science
A soft touch: Measuring the force it takes for a hand to grasp an object requires sensors to be placed on the fingertips, but these sensors will interfere with or affect how much force ends up being applied. Lee et al. developed a nanomesh sensor built from a series of electrospun materials (see the Perspective by Liu). Using a robotic tester, they show that this device can repeatably detect the pressure involved in gripping an object. They also show that the sensors can be attached to human fingers and that this does not affect the force used to grasp an object. Science , this issue p. 966 ; see also p. 910
1 May 2015 in Journal of Neurophysiology
During interaction with objects, we form an internal representation of their mechanical properties. This representation is used for perception and for guiding actions, such as in precision grip, where grip force is modulated with the predicted load forces. In this study, we explored the relationship between grip force adjustment and perception of stiffness during interaction with linear elastic force fields. In a forced-choice paradigm, participants probed pairs of virtual force fields while grasping a force sensor that was attached to a haptic device. For each pair, they were asked which field had higher level of stiffness. In half of the pairs, the force feedback of one of the fields was delayed. Participants underestimated the stiffness of the delayed field relatively to the nondelayed, but their grip force characteristics were similar in both conditions. We analyzed the magnitude of the grip force and the lag between the grip force and the load force in the exploratory probing movements within each trial. Right before answering which force field had higher level of stiffness, both magnitude and lag were similar between delayed and nondelayed force fields. These results suggest that an accurate internal representation of environment stiffness and time delay was used for adjusting the grip force. However, this representation did not help in eliminating the bias in stiffness perception. We argue that during performance of a perceptual task that is based on proprioceptive feedback, separate neural mechanisms are responsible for perception and action-related computations in the brain.
15 September 2012 in Journal of Neurophysiology
Daily interaction with the environment consists of moving with or without objects. Increasing interest in both types of movements drove the creation of computational models to describe reaching movements and, later, to describe a simplified version of object manipulation. The previously suggested models for object manipulation rely on the same optimization criteria as models for reaching movements, yet there is no single model accounting for both tasks that does not require reminimization of the criterion for each environment. We suggest a unified model for both cases: minimum acceleration with constraints for the center of mass (MACM). For point-to-point reaching movement, the model predicts the typical rectilinear path and bell-shaped speed profile as previous criteria. We have derived the predicted trajectories for the case of manipulating a mass-on-spring and show that the predicted trajectories match the observations of a few independent previous experimental studies of human arm movement during a mass-on-spring manipulation. Moreover, the previously reported “unusual” trajectories are also well accounted for by the proposed MACM. We have tested the predictions of the MACM model in 3 experiments with 12 subjects, where we demonstrated that the MACM model is equal or better (Wilcoxon sign-rank test, P < 0.001) in accounting for the data than three other previously proposed models in the conditions tested. Altogether, the MACM model is currently the only model accounting for reaching movements with or without external degrees of freedom. Moreover, it provides predictions about the intermittent nature of the neural control of movements and about the dominant control variable.
12 October 2016 in Journal of Neuroscience
How motion and sensory inputs are combined to assess an object's stiffness is still unknown. Here, we provide evidence for the existence of a stiffness estimator in the human posterior parietal cortex (PPC). We showed previously that delaying force feedback with respect to motion when interacting with an object caused participants to underestimate its stiffness. We found that applying theta-burst transcranial magnetic stimulation (TMS) over the PPC, but not the dorsal premotor cortex, enhances this effect without affecting movement control. We explain this enhancement as an additional lag in force signals. This is the first causal evidence that the PPC is not only involved in motion control, but also has an important role in perception that is disassociated from action. We provide a computational model suggesting that the PPC integrates position and force signals for perception of stiffness and that TMS alters the synchronization between the two signals causing lasting consequences on perceptual behavior.SIGNIFICANCE STATEMENTWhen selecting an object such as a ripe fruit or sofa, we need to assess the object's stiffness. Because we lack dedicated stiffness sensors, we rely on an as yet unknown mechanism that generates stiffness percepts by combining position and force signals. Here, we found that the posterior parietal cortex (PPC) contributes to combining position and force signals for stiffness estimation. This finding challenges the classical view about the role of the PPC in regulating position signals only for motion control because we highlight a key role of the PPC in perception that is disassociated from action. Altogether this sheds light on brain mechanisms underlying the interaction between action and perception and may help in the development of better teleoperation systems and rehabilitation of patients with sensory impairments.
1 July 2020 in Journal of Neurophysiology
While ballistic hand reaching movements are characterized by smooth position and velocity signals, the activity of the muscles exhibits bursts and silent periods. Here, we propose that a model based on bang-bang control provides the link between the abrupt changes in the muscle activity and the smooth reaching trajectory. Using bang-bang control instead of continuous control may simplify the design of prostheses and other physical human-robot interaction systems.