This study investigates the tracking of underwater cables using autonomous underwater vehicles (AUVs) equipped with side-scan sonar (SSS). AUV motion stability is crucial for effective SSS imaging, which is essential for continuous cable tracking. Traditional methods that derive AUV guidance rates directly from measured cable states often cause unnecessary jitter when imaging, complicating accurate detection. To address this, we propose a non-myopic receding-horizon optimization (RHO) strategy designed to maximize cable imaging quality while considering AUV maneuvering constraints. This strategy identifies the optimal heading decision sequence over a future horizon, ensuring stable and efficient cable tracking. We also employ a long short-term memory (LSTM) network to predict future cable states, further minimizing AUV motion instability during abrupt path changes. Given the computational limitations of AUVs, we have developed an efficient decision-making framework that can execute resource-intensive algorithms in real time. Finally, the robustness and effectiveness of the proposed algorithm were validated through comparative experiments. The results demonstrate that the proposed method outperforms existing methods in key metrics such as cable-tracking accuracy and AUV motion stability. This ensures that the AUV can acquire high-quality acoustic images of the submarine cable in an optimal state, enhancing the continuity and reliability of cable-tracking tasks.
With advancements in Autonomous Underwater Vehicle (AUV) and sensor technologies, the operational paradigms for seabed survey are undergoing significant transformation. Compared to traditional towed or remotely operated platforms, AUV-based seabed survey systems demonstrate superior capabilities in data resolution, operational efficiency and stealth. Furthermore, propelled by progress in artificial intelligence, the technical approaches of AUV-based seabed exploration systems are also experiencing disruptive changes. Based on our observations, existing review articles predominantly focus on individual technologies within seabed survey operations, failing to reflect the systemic constraints and interdependencies among these discrete technological components. This review focuses on the scenario of seabed target detection within seabed survey operations, summarizing research progress aimed at enhancing the effectiveness of such systems across three key technical areas: image processing of side-scan sonar (SSS) systems, intelligent detection of seabed targets and autonomous path planning for survey missions, which is based on a representative system—AUV-mounted SSS system. Given the multi-faceted challenges still present in seabed exploration technology, this paper aims to provide directional guidance for new researchers entering this field.
The use of a multi-functional autonomous underwater vehicle (AUV) as a platform for making turbulence measurements in the ocean is developed. The layout optimization of the turbulence package and platform motion performance are limitation problems in turbulent AUV design. In this study, the computational fluid dynamics (CFD) method has been used to determine the optimized layout position and distance of the shear probe integrated into an AUV. When placed 0.8 D ahead of the AUV nose along the axis, the shear probe is not influenced by flow distortion and can contact the water body first. To analyze the motion of the turbulence AUV, the dynamic model of turbulence AUV for planar flight is obtained. Then, the mathematical equations of speed and angle of attack under steady-state motion have also been obtained. By calculating the hydrodynamic coefficients of the turbulence AUV and given system parameters, the simulation analysis has been conducted. The simulation results demonstrated that the speed of turbulent AUV is 0.5–1 m/s, and the maximum angle of attack is less than 6.5°, which meets the observation requirements of the shear probe. In addition, turbulence AUV conducted a series of sea-trials in the northern South China Sea to illustrate the validity of the design and measurement. Two continuous profiles (1000 m) with a horizontal distance of 10 km were completed, and numerous high-quality spatiotemporal turbulence data were obtained. These profiles demonstrate the superior flight performance of turbulence AUV. Analysis shows that the measured data are of high quality, with the shear spectra being in very good agreement with the Nasmyth spectrum. Dissipation rates are consistent with background shear. When shear velocity is weak, the measurement of dissipation rate is 10−10 W Kg−1. All indications are that the turbulence AUV is suitable for long-term, contiguous ocean microstructure measurements, which will provide data needed to understand the temporal and spatial variability of the turbulent processes in the oceans.
This study developed a new cross-platform instrument for microstructure turbulence measurement (CPMTM) and evaluated its performance. The CPMTM is designed as an “all-in-one” payload that can be easily integrated with a variety of marine instrumentation platforms. The sensors in the CPMTM include two shear probes, a fast-response temperature probe, and an accelerometer for monitoring vibrations. In addition, a custom-designed flexible connection vibration-damping device is used to isolate platform vibrations. To validate the CPMTM performance, a direct comparison was carried out with a reference acoustic Doppler velocimeter in a controlled flume for four background turbulence levels. The results of the comparison show that the velocity spectra measured by the CPMTM and ADV w components are in agreement, which demonstrates the ability of the CPMTM to acquire accurate turbulence data. Furthermore, the CPMTM was integrated into the long-range Sea-Whale 2000 AUV and tested in the northern South China Sea in September 2020. The data collected by the CPMTM show that the measured shear spectrum of the noise reduction agrees well with the empirical Nasmyth spectrum. Turbulent kinetic energy dissipation rates as low as 7 × 10−10 W kg−1 can be resolved. Laboratory and field experiments illustrate that the CPMTM has an extraordinarily low noise level and is validated for turbulence measurements.
Underwater target detection via side-scan sonar is vital for defense and economy but hindered by sparse targets, high data costs, and feature extraction difficulties due to textureless acoustic data and limited samples. To overcome these limitations, particularly for few-shot, small-object detection, we propose a Spatial Distribution Probability-Guided Detection Framework to aid Unmanned Underwater Vehicles (UUVs) in precise localization and clustering. The framework features a novel module that leverages a pre-trained Vision Foundation Model (DINOv3) to generate spatial distribution probability maps, guiding a Transformer-based network for accurate detection with scarce data. Additionally, it incorporates a Target Position Calculation Module and a DBSCAN-based post-processing module to determine global geographic coordinates and cluster discrete points, respectively. Experiments were conducted on both a Public Mine Detection Dataset and a self-collected dataset containing simulated mines and buoys. Ablation studies and comparison experiments demonstrated that the proposed guidance mechanism significantly improves detection performance. Furthermore, two comb-search missions verified that the system could accurately locate and cluster targets, distinguishing real targets from false detections (noise). These results confirm the framework’s efficacy in enabling high-precision perception and autonomous operations for complex underwater inspection tasks.
This study describes the development of a long-range hybrid autonomous underwater vehicle (AUV) for ocean turbulence measurement. It is a unique instrument, combining the characteristics of the conventional AUV and the buoyancy-driven glider, with a variety of flexible motion modes, such as cruise mode, glider mode, drift mode, and combination of multiple motion modes. The hybrid AUV was used for continuous turbulence measurement in the continental slope of the northern South China Sea in 2020. A total of ten continuous profiles were completed covering a horizontal span of 25 Km and a depth of 200 m. The hybrid AUV was operated in the combined glider and cruise mode. The hybrid AUV’s flight performance was stable and satisfied the requirement for turbulence observation. The measured velocity shears from both probes were in good agreement, and the noise-reduced shear spectra were in excellent agreement with the Nasmyth spectrum. The water column in the study area was highly stratified, with a thick thermocline. The dissipation rate (ε) varied from 1.41 × 10−10 to 4.18 × 10−7 W·kg−1. In the surface mixed layer, high values of ε (10−9∼10−8 W·kg−1) were observed toward the water surface. In the thermocline, ε was 10−9.5∼10−9 W·kg−1, which was smaller than the level of the surface mixed layer. This result was mainly because of the strong “barrier”-like thermocline, which damped the transmission of wind and heat energy from the surface mixed layer to the deep layer. Overall, this study demonstrates the utility of hybrid AUVs for collecting oceanic turbulence measurements. They are a powerful addition to traditional turbulence instruments, as they make it possible to survey large areas to obtain high-quality and high-resolution data in both vertical and horizontal directions over long durations.