1 April 2011 in Journal of Geotechnical and Geoenvironmental Engineering
Tropical residual clays with a highly porous structure react to the stress changes induced by tunneling in such a way that surface settlements can be larger than crown-level settlements along a tunnel axis. This behavior, which is not readily simulated by most numerical analyses, was also observed in the Paraiso tunnel, built for the São Paulo Metro, Brazil. This is a shallow tunnel driven through porous clayey soils by the sequential method. Detailed results of field monitoring are presented and discussed. 3D finite-element analyses that allowed a detailed simulation of the construction sequence have been carried out, considering two distinct constitutive models for the soil: a simple elastic-perfectly-plastic Mohr-Coulomb model, and the elastoplastic model developed by Lade. The results of these analyses are compared with the observed behavior as well as with the results from a plane strain finite-element analysis. It is shown that only the 3D finite-element analysis coupled with the more sophisticated soil constitutive model provides a full reproduction of field performance, with particular relevance for the deformations in the soil mass over the tunnel.
1 February 2010 in Soils and Foundations
1 June 1997 in Géotechnique
In the north-western region of Portugal residual soils from granite are dominant. Their porous cemented structure leads to a complex geotechnical behaviour, quite distinct from that of transported soils with a similar grain size distribution. The paper describes some of the studies carried out at an experimental site on which a fairly homogeneous saprolitic soil 6m thick was encountered. These studies included: (i) a full-scale load test of a circular concrete footing (1·20m diameter), under carefully controlled conditions and with extensive monitoring; (ii) in situ testing techniques (SPT, CPT, SBPT, CH) and (iii) laboratory testing on high-quality block samples, including triaxial tests with local strain measurement. The discussion is concentrated on the interpretation of the pressure—settlement curve from the footing load test, for a range of pressures typical of working conditions, by means of linear and non-linear elastic analyses based on stiffnesses from the laboratory and in situ tests. Some practical conclusions are extracted regarding the use of in situ and laboratory test results in analytical and empirical or semi-empirical methods for settlement estimation on these residual soils. Les sols résiduels du granit dominent le littoral de la région nord du Portugal. Les fabrique et structure de ces sols et particullièrement leur matrice cémentée et poreuse conduissent à des comportements géotechniques complexes, trés diff6rents des sols transportés avec granulomé trie similaire. Varticle décrit une partie des études réalisé sur un terrain expérimental où apparaissent des niveaux superficiels typiques des sols saprolitiques du granit de la région. Les études réalis6s comprennent: (i) un essai de charge d'une semelle circulaire de béton armé (avec 1·20 m de diamètre), soigneuse et extensivement instrumentée; (ii) diverses essais in situ (SPT, CPT, SBPT, CH); (iii) essais en laboratoire sur des échantillons de haute qualité retirés des blocks taillés en pmts, comprennant des essais triaxiaux avec instrumentation interne des déformations. La discussion est concentrée dans l'interpr6tation de la courbe de chargement-tassement obtenu de Pessai de charge de la semelle en utilisant des résultats des essais in situ et en laboratoire, considérant les niveaux de charge typiques des conditions de service. On extrait des conclusions sur ľapplication des résultats des essais in situ et en laboratoire aux méthodes empiriques et semi-empiriques pour ľvaluation des tassements des fondations en sols résiduels du granit.
8 August 2007 in Geotechnical and Geological Engineering
1 July 2008 in Canadian Geotechnical Journal
A previous paper studied the stability of soldier-pile walls in clay under vertical loading using upper bound analyses. A classical Tresca yield criterion was assumed in that analysis. This paper extends that study by considering a tension truncated Tresca yield criterion in an upper bound numerical analysis of the problem. It shows that assuming zero tension soil strength has a significant influence on the values of the minimum soldier-pile resistance required to ensure stability.
1 December 2004 in Journal of Geotechnical and Geoenvironmental Engineering
The problem of vertical stability in flexible anchored retaining walls is analyzed and the pattern of the behavior under conditions of poor vertical support is described, on the basis of results from case histories, small-scale tests, and numerical modeling. The possibility of shear stress mobilization in the soil-to-wall interface of anchored concrete soldier–pile retaining walls is discussed. A finite element procedure to model excavations supported by soldier–pile retaining walls is described and applied to a numerical case study. Finite element analyses are performed, emphasizing the consequences of vertical instability due to buckling of the soldier piles and the role of interface resistance in vertical equilibrium. The understanding of some results of the numerical analyses, which are highly influenced by the complexity of the interaction between the different parts of the structure, is obtained by reassessing the vertical equilibrium issue in the light of limit analysis. This approach makes it possible to estimate the pile resistance corresponding to the limit situation of excavation collapse. The finite element model is used to confirm this resistance. Some conclusions are drawn.