27 December 2021 in Nano Letters
28 May 2024 in Nature Communications
Maintaining the surface transparency of protective covers using transparent heaters in extreme weather is imperative for enhancing safety in autonomous driving. However, achieving both high transmittance and low sheet resistance, two key performance indicators for transparent heaters, is inherently challenging. Here, inspired by metamaterial design, we report microwave-transparent, low-sheet-resistance heaters for automotive radars. Ultrathin (approximately one ten-thousandth of the wavelength), electrically connected metamaterials on a millimetre-thick dielectric cover provide near-unity transmission at specific frequencies within the W band (75–110 GHz), despite their metal filling ratio exceeding 70 %. These metamaterials yield the desired phase delay to adjust Fabry–Perot resonance at each target frequency. Fabricated microwave-transparent heaters exhibit exceptionally low sheet resistance (0.41 ohm/sq), thereby heating the dielectric cover above 180 °C at a nominal bias of 3 V. Defrosting tests demonstrate their thermal capability to swiftly remove thin ice layers in sub-zero temperatures.
14 August 2019 in Optics Express
We experimentally demonstrate a time-multiplexing method for pulse-pumped heralded single-photon sources using switchable optical fiber delay lines. The optical fibers constitute a 32-channel binary-division photon buffer that can multiplex time slots into single temporal mode to enhance single-photon generation rate without increasing multi-photon noise. Relative time multiplexing using the same actively controlled variable delay realizes Hong-Ou-Mandel interferometry by two photons produced in arbitrary two time-bins. The interference dip depth in good agreement with theory verifies path length matching within the photonic coherence length and dispersion compensation of the optical fiber delay sections. We independently confirm by low-coherence interferometry that the internal optical path lengths of the optical switches are constant during the switching operations.
21 January 2022 in Journal of the Korean Physical Society
13 April 2026 in Nature Electronics
Human vision relies on photoreceptor cells in the outer retina that are sensitive to visible light. However, many people suffer from blindness due to retinal diseases that cause photoreceptor degeneration. Electrical stimulation of retinal neurons can recreate the action potentials associated with seeing that are generated by these cells. Here we report a thin artificial retina that can be adhered to the epiretinal surface and can convert near-infrared (NIR) light into electrical stimuli that selectively stimulate ganglion cells. The artificial retina consists of a NIR-sensitive phototransistor array and three-dimensional liquid metal micropillar electrodes. The liquid metal electrodes enhance proximity to retinal ganglion cells, providing effective charge injection while minimizing tissue damage, owing to their low Young’s modulus. Ex vivo studies demonstrate its biocompatibility, and in vivo studies using healthy and blind mice demonstrate perception of both visible and NIR light, as indicated by cortical recordings and behavioural tests. The retina could, in the future, be used to create a NIR visual channel in patients with photoreceptor degenerative blindness without interfering with their remaining natural vision.