Byung Hak Choe

Byung Hak Choe

Auto-generated profile, based on publicly available information

Byung Hak Choe

Department of Metal and Materials Engineering, Gangneung-Wonju National University, Gangneung 25457, Republic of Korea

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 April 2019 in Metals
Verified
Journal Article
Open access
PDF file
YKYoung Suk Kim
Young Suk Kim
SKSung Soo Kim
Sung Soo Kim
BCByung Hak Choe
Byung Hak Choe
Hydrogen embrittlement (HE) of metals has remained a mystery in materials science for more than a century. To try to clarify this mystery, tensile tests were conducted at room temperature (RT) on a 316 stainless steel (SS) in air and hydrogen of 70 MPa. With an aim to directly observe the effect of hydrogen on ordering of 316 SS during deformation, electron diffraction patterns and images were obtained from thin foils made by a focused ion beam from the fracture surfaces of the tensile specimens. To prove lattice contraction by ordering, a 40% CW 316 SS specimen was thermally aged at 400 °C to incur ordering and its lattice contraction by ordering was determined using neutron diffraction by measuring its lattice parameters before and after aging. We demonstrate that atomic ordering is promoted by hydrogen, leading to formation of short-range order and a high number of planar dislocations in the 316 SS, and causing its anisotropic lattice contraction. Hence, hydrogen embrittlement of metals is controlled by hydrogen-enhanced ordering during RT deformation in hydrogen. Hydrogen-enhanced ordering will cause the ordered metals to be more resistant to HE than the disordered ones, which is evidenced by the previous observations where furnace-cooled metals with order are more resistant to HE than water-quenched or cold worked metals with disorder. This finding strongly supports our proposal that strain-induced martensite is a disordered phase.

5 October 2020 in Korean Journal of Metals and Materials
Verified
Journal Article
Open access
PDF file
BCByung Hak Choe
Byung Hak Choe
SLSang Woo Lee
Sang Woo Lee
JAJong Kee Ahn
Jong Kee Ahn
JLJinhee Lee
Jinhee Lee
TLTae Woon Lim
Tae Woon Lim
The phenomena of hydrogen induced cracking (HIC) in 304 stainless steels was considered in a hydrogen pressure and stress corrosive atmosphere. Microstructures with chloride pits and stress corrosion cracks around the HIC were analyzed by SEM/EDS. Abnormal phase transformations induced by the hydrogen were analyzed using TEM and diffraction. In the hydrogen pressure atmosphere, pits and pores were observed on the surface of the 304 stainless steels. In addition, it was determined that Cl, an etchant component, was concentrated at a high concentration in the pits. SCC (stress corrosion cracking) was induced in the Cl atmosphere by stress caused by the abrasive embedded in the pits. It was assumed that the SCC mechanism is similar to HIC in that it occurs in the surface tensile stress and Cl atmosphere and is accompanied by grain boundary cracks similar to IGSCC (inter-granular SCC). The deformation induced phase transformation accompanied by planar slip should be related to the main cause of HIC in the hydrogen pressured atmosphere. Abnormal forbidden spots between the main diffraction spots were induced by the HIC in the hydrogen attacked area, where the microstructure was hardened. Understanding the HIC mechanism related to chloride corrosion can be used to assess the fitness of austenitic stainless steels for uses where there is a possibility of various susceptible cracking in hydrogen and chloride atmospheres.

9 June 2024 in Engineering Failure Analysis
Verified
Journal Article
Closed access
YKYoungsik Kim
Youngsik Kim
BCByunghak Choe
Byunghak Choe
SHSunghee Han
Sunghee Han
DKDaehyun Kim
Daehyun Kim
JKJinha Kim
Jinha Kim
SCSeokyeol Choi
Seokyeol Choi

3 July 2024 in Engineering Failure Analysis
Verified
Journal Article
Closed access
DKDaehyun Kim
Daehyun Kim
BCByunghak Choe
Byunghak Choe
SHSunghee Han
Sunghee Han
JKJinha Kim
Jinha Kim
JLJinhee Lee
Jinhee Lee
WLWoonggeun Lee
Woonggeun Lee

3 August 2018 in Metals
Verified
Journal Article
Open access
PDF file
JKJang-Won Kang
Jang-Won Kang
PJPark Jongmin
Park Jongmin
BCByung Hak Choe
Byung Hak Choe
SLSeong Lee
Seong Lee
JPJung Hyo Park
Jung Hyo Park
HKHyung Giun Kim
Hyung Giun Kim
A method was developed to fabricate spherical Mo5Si3 powder by milling and spheroidizing using inductively coupled thermal plasma. A Mo5Si3 alloy ingot was fabricated by vacuum arc melting, after which it was easily pulverized into powder by milling due to its brittle nature. The milled powders had an irregular shape, but after being spheroidized by the thermal plasma treatment, they had a spherical shape. Sphericity was increased with increasing plasma power. After plasma treatment, the percentage of the Mo3Si phase had increased due to Si evaporation. The possibility of Si evaporation was thermodynamically analyzed based on the vapor pressure of Mo and Si in the Mo5Si3 liquid mixture. By this process, spherical Mo silicide powders with high purity could be fabricated successfully.

29 March 2025 in Metals
Verified
Journal Article
Open access
PDF file
KCKwang Soo Choi
Kwang Soo Choi
BCByunghak Choe
Byunghak Choe
SHSunghee Han
Sunghee Han
DKDaehyun Kim
Daehyun Kim
SSSeong-Moon SEO
Seong-Moon SEO
DYDae-won Yun
Dae-won Yun
In this study, the morphology of high-temperature surface oxides in Ni-based superalloys was investigated as a function of Cr and Al content. First, the oxide layer morphologies of various alloys published in the literature were classified according to the basic model of Cr and Al content. Then, the high-temperature oxide layers of high-Cr/low-Al and low-Cr/high-Al alloys were investigated using SEM/EDX mapping. The high-temperature oxidation of Ni-based superalloys is affected by the amount of added elements such as Ti, Cr, and Al. The oxidation rate of each element is NiO > TiO2 > Cr2O3 > Al2O3, and the shape of the surface oxide layer is determined by the oxidation rate. The oxide layer is mainly classified according to the flat and fibrous shapes of Cr2O3 and Al2O3 on the outermost layer. In this study, IN738LC and IN792, as the high Cr-low Al alloys, were found to have flat Cr2O3 and fibrous type Al2O3 in the outermost layer after long-term exposure to high temperatures, while CM247LC and CMSX4 which are the low Cr-high Al alloys were found to have flat type Al2O3 in the outermost layer after long-term exposure to high temperatures, which is in good agreement with the results of various literature on oxide layers on Ni-based superalloys.