28 April 2025 in IEEE Sensors Journal
The radial artery contains wealthy physiological information, and the pulse signal at the radial artery is critical for responding to the condition of the cardiovascular system. It is essential to consider their spatial and temporal dimensions to understand pulse signals comprehensively. However, most traditional pulse acquisition platforms are based on single-point sensors, leading to limited information and considerable errors. This paper proposes a pulse signal acquisition system equipped with a high-density sensor array capable of accurately and automatically locating arterial pulsation points. By focusing on the strongest pulse signals, the system enables precise monitoring of heart rate and respiratory rate. Additionally, an innovative bicubic interpolation method is employed to construct a high-precision three-dimensional (3D) pulse map, allowing for the extraction of pulse width and pulse length parameters. Using the flip-chip packaging, a 24-channel array of microelectromechanical systems (MEMS) piezoresistive sensors has been built. The area of a sensor is only 1.8 mm × 1.8 mm. Sensor experiments have demonstrated that sensors exhibit good linearity, fast response time, high sensitivity, high consistency, and good durability. This system provides a wealth of information for pulse signal research and holds potential applications for health diagnostics.
25 November 2025 in IEEE Transactions on Instrumentation and Measurement
Acupuncture, a key therapeutic method in traditional Chinese medicine (TCM), has been widely adopted in various clinical fields. Quantitative research on acupuncture manipulation parameters is critical for achieving standardized techniques. However, quantitative mechanical detection of acupuncture parameters remains limited. In this study, a kinematic and dynamic model of acupuncture is established, and key parameters such as the lifting-thrusting force, acceleration, velocity, and displacement, as well as the twirling-rotating angular velocity and angle, are identified. To measure these critical parameters, we propose a quantitative system comprising a sensing needle equipped with a force sensor and an inertial measurement unit (IMU), as well as an external camera module to capture image information. By fusing visual and IMU data, we can accurately identify the stationary or motion states of the needle, enabling segmented computation of the lifting-thrusting velocity and displacement. The experimental results demonstrate that the sensing needle achieves comprehensive detection with high precision, featuring an accuracy of 0.45% in force measurement and an RMSE of 1.2 mm in displacement. The extracted parameters provide an objective description of the operational characteristics and motion patterns of the four basic acupuncture manipulations and two auxiliary manipulations. These findings provide valuable tools and methods for research on acupuncture standardization.