In this study, we present methods of optimization-based power system state estimation over sensor networks. By minimizing a composite loss function while ensuring that the state, disturbance, and measurement noise constraints are satisfied, the best or better state estimates are iteratively computed. The proposed distributed computational methods for power system state estimation are based on operator splitting. Our methods are computationally decomposable over sensor networks, so distributed and parallel computing can be applied. They can systematically handle the constraints of the state variables and noise as well as disturbances, such that the negative effects of bad data and parametric model uncertainty can automatically be reduced in the estimation. For demonstration, the IEEE 118-bus power system dynamic state estimation problem is considered. The results are compared to the ones obtained from a distributed extended Kalman filter. It is shown that compared with a distributed extended Kalman filter, the proposed method achieves improved robustness against adversarial data defection.
We propose a model predictive control (MPC) method to compensate for the time-varying phase aberrations in a sensorless adaptive optics (AO) system. The approximate model for the point spread function (PSF) of the imaging system with phase diversity is mathematically derived, and its validity is verified. The proposed MPC, which considers the operating limits of the deformable mirror (DM), computes the optimal applied voltage of each actuator over a prediction horizon, and the receding horizon scheme is applied as feedback control. Numerical case studies with the time-varying phase aberrations generated by an atmospheric turbulence simulator are presented to demonstrate the correction performance of the MPC strategy. The proposed method caused a 50% improvement in the reduction in residual aberration, making it competitive with a saturation linear quadratic regulator (LQR). The computational feasibility of the proposed method is validated using fast MPC, which approximates the primal barrier method.
The effective management of shared resources within energy communities poses a significant challenge, particularly when balancing renewable energy generation and fluctuating demand. This paper introduces a novel optimization framework that integrates people flow data, modeled using the Social Force Model (SFM), with energy management strategies to enhance the efficiency and sustainability of energy communities. By combining SFM with the Non-dominated Sorting Genetic Algorithm III (NSGA-III), the framework addresses multi-objective optimization problems, including minimizing energy costs, reducing user waiting times, and maximizing renewable energy utilization. The study employs synthesized data to simulate an energy community with shared facilities such as electric vehicle (EV) charging stations, communal kitchens, and laundry rooms. Results demonstrate the framework’s ability to align energy generation with resource demand, reducing peak loads and improving user satisfaction. The optimization model effectively incorporates real-time behavioral dynamics, showcasing significant improvements in renewable energy utilization–reaching up to 88% for EV charging stations–and cost reductions across various scenarios. This research pioneers the integration of people flow modeling into energy optimization, providing a robust tool for managing the complexities of energy communities.