11 January 2023 in Soils and Rocks
1 January 2024 in REM - International Engineering Journal
One of the methods to minimize the negative impact caused by inadequate disposal of Water Treatment Plant Sludge (WTPS) is to mix it with the soil, applying the material in engineering works. In this research, the objective was the use of WTPS for soil stabilization purposes, verifying the improvement of the characteristics and properties with 0%, 15%, 30% and 50% of sludge, for application in the base and sub-base layers of road pavements. Characterization, compaction, permeability, Resistance to Simple Compression (RCS), and California Bearing Ratio (CBR) tests were carried out. However, none of the mixes met all the necessary requirements for use in the pavement layers, but it is concluded that there was an increase in the RCS, CBR and impermeability of the mixtures compared to the reference mixture (100% soil). The RCS increased 142.75% of the soil for a blend with 30% sludge, CBR increased 76.52% of the soil for mixture with 50% WTPS, and the permeability of blends with 15%, 30% and 50% sludge was lower than then with only the soil. These results show that these mixtures can be useful for other types of applications in Geotechnics, being able to contribute to the sustainable destination of WTPS.
4 November 2024 in Soils and Rocks
The stability of slopes or the occurrence of mass movements is directly related to the incidence of rainfall. In this work a qualitative analysis of the historical series was made for the period between May 2012 and February 2019, where the development of pore pressures was evaluated, analyzing the behaviors of the instruments, correlating their readings with precipitation and with variations in the water table. Pore pressure was measured using vibrating wire piezometers, and precipitation data was collected using pluviometers with tipper buckets, whose readings were obtained by a datalogger model ML1-FL. From the data collected, it was possible to estimate the duration of a rainfall event for the soil, as that time interval between the occurrence of rain and the dissipation of excess pore pressure. These intervals are between 3 and 26 days in duration. The main results were: the period between the end of June and August is the driest and the highest precipitation occurs from December to early June; Precipitation of up to 100 mm of daily accumulation is well distributed throughout the year and occurs in all seasons. The pore pressure values developed were low, with a maximum of 9.3 kPa for the deepest piezometer on elevation 92.40 m. There is a delay between the occurrence of precipitation and the recording of the peak pore pressure. The in-depth knowledge of variations in precipitation and pore pressure can support the development of more robust geotechnical engineering projects. This preventive approach, based on concrete data and correlations, offers a more reliable strategy for mitigating the risks associated with landslides, directly contributing to the safety and continuous operation of the BR-101/SC highway.