11 January 2023 in Soils and Rocks
1 January 2024 in REM - International Engineering Journal
One of the methods to minimize the negative impact caused by inadequate disposal of Water Treatment Plant Sludge (WTPS) is to mix it with the soil, applying the material in engineering works. In this research, the objective was the use of WTPS for soil stabilization purposes, verifying the improvement of the characteristics and properties with 0%, 15%, 30% and 50% of sludge, for application in the base and sub-base layers of road pavements. Characterization, compaction, permeability, Resistance to Simple Compression (RCS), and California Bearing Ratio (CBR) tests were carried out. However, none of the mixes met all the necessary requirements for use in the pavement layers, but it is concluded that there was an increase in the RCS, CBR and impermeability of the mixtures compared to the reference mixture (100% soil). The RCS increased 142.75% of the soil for a blend with 30% sludge, CBR increased 76.52% of the soil for mixture with 50% WTPS, and the permeability of blends with 15%, 30% and 50% sludge was lower than then with only the soil. These results show that these mixtures can be useful for other types of applications in Geotechnics, being able to contribute to the sustainable destination of WTPS.
23 October 2026 in Transportes
This study analyzes the influence of various pavement types on noise levels along selected streets in Alegrete (RS), Brazil. Noise measurements were conducted in accordance with ISO 11819-1 (1997), while service conditions were evaluated according to PRO 009 (DNIT, 2003). Road sections featuring asphalt, cobblestone blocks, and interlocked concrete blocks were selected, each presenting different states of conservation. To assess service performance, six evaluators traveled along the chosen routes by car. Vehicle noise levels were measured using a sound level meter, and speeds were recorded to determine the Statistical Pass-By Index (SPBI). Analysis of the results indicated that asphalt surfaces produced the lowest noise levels, regardless of their state of conservation. In contrast, cobblestone blocks yielded the highest noise levels under both conditions evaluated. Nonetheless, it should be emphasized that the conservation state significantly affects ambient noise, indicating that pavement type alone cannot be considered the sole determinant of noise levels.