A number of X-ray astronomical missions of near future will make use of hard X-ray optics with broad-band multilayer coatings. However multilayer mirrors can be also useful to enhance the effective area of a given X-ray telescope in the "classical" low energy X-ray band (0.1 - 10 keV), the window where X-ray spectroscopy provides very useful plasma diagnostics) with a consistent gain with respect to usual single-layer reflectors. Multilayers for soft X-rays are based on stacks with constant d-spacing (in order to minimize the loss due to the photoelectric effect). A further gain in reflectivity (however only restricted to the energy range between 0.5 and 4 keV) can be achieved by using a low density material as a first external layer of the film, with the role of reducing the photoelectric absorption effect when the mirror acts in total external reflection regime (Carbon is the most performing material for this specific scope). In this paper the impact of using soft X-ray multilayer mirrors in future X-ray telescopes is discussed, and soft X-ray reflectivity tests performed on prototype samples presented.
An important issue in the chemistry of interstellar ices is the role of dust materials. In this work, we study the effect of an amorphous water-rich magnesium silicate deposited onto ZnSe windows on the chemical evolution of ultraviolet-irradiated methanol ices. For comparison, we also irradiate similar ices deposited onto bare ZnSe windows. Silicates are produced at relatively low temperatures exploiting a sol–gel technique. The chemical composition of the synthesized material reflects the forsterite stoichiometry. Si–OH groups and magnesium carbonates are incorporated during the process. The results show that the substrate material does affect the chemical evolution of the ice. In particular, the CO2/CO ratio within the ice is larger for methanol ices deposited onto the silicate substrate as a result of concurrent effects: the photolysis of carbonates present in the adopted substrate as a source of CO2, CO, and carbon and oxygen atoms; reactions of water molecules and hydroxyl radicals released from the substrate with the CO formed in the ice by the photolysis of the methanol ice; and changes in the structure and energy of the silicate surface by ultraviolet irradiation, leading to more favorable conditions for chemical reactions or catalysis at the grain surface. The results of our experiments allow such chemical effects contributed by the various substrate material components to be disentangled.
27 February 2001 in Journal of Non-Crystalline Solids
The X-ray Integral Field Unit (X-IFU) is one of the two instruments of the Athena astrophysics space mission approved by ESA in the Cosmic Vision 2015-2025 Science Programme. The X-IFU consists of a large array of transition edge sensor micro-calorimeters that will operate at ~100 mK inside a sophisticated cryostat. A set of thin filters, highly transparent to X-rays, will be mounted on the opening windows of the cryostat thermal shields in order to attenuate the IR radiative load, to attenuate radio frequency electromagnetic interferences, and to protect the detector from contamination. Thermal filters are critical items in the proper operation of the X-IFU detector in space. They need to be strong enough to survive the launch stresses but very thin to be highly transparent to X-rays. They essentially define the detector quantum efficiency at low energies and are fundamental to make the photon shot noise a negligible contribution to the energy resolution budget. In this paper, we review the main results of modeling and characterization tests of the thermal filters performed during the phase A study to identify the suitable materials, optimize the design, and demonstrate that the chosen technology can reach the proper readiness before mission adoption.
1 May 2011 in Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment