1 July 2014 in IEEE Transactions on Industrial Informatics
Well known as an efficient and eco-friendly power source, fuel cell, unfortunately, offers slow dynamics. When attached as primary energy source in a vehicle, fuel cell would not be able to respond to abrupt load variations. Supplementing battery and/or supercapacitor to the system will provide a solution to this shortcoming. On the other hand, a current regulation that is vital for lengthening time span of the energy storage system is needed. This can be accomplished by keeping fuel cell's and batteries' current slope in reference to certain values, as well as attaining a stable dc output voltage. For that purpose, a feedback control system for regulating the hybrid of fuel cell, batteries, and supercapacitor was constructed for this study. Output voltage of the studied hybrid power sources (HPS) was administered by assembling three dc-dc converters comprising two bidirectional converters and one boost converter. Current/voltage output of fuel cell was regulated by boost converter, whereas the bidirectional converters regulated battery and supercapacitor. Reference current for each converter was produced using Model Predictive Control (MPC) and subsequently tracked using hysteresis control. These functions were done on a controller board of a dSPACE DS1104. Subsequently, on a test bench made up from 6 V, 4.5 Ah battery and 7.5 V, 120 F supercapacitor together with a fuel cell of 50 W, 10 A, experiment was conducted. Results show that constructing a control system to restrict fuel cell's and batteries' current slope and maintaining dc bus voltage in accordance with the reference values using MPC was feasible and effectively done.
13 November 2021 in IEEE Access
This paper proposes a path planning algorithm using the hybridization of the rapidly-exploring random tree (RRT) and ant colony system (ACS) algorithms. The RRT algorithm can quickly generate paths. However, the resulting path is suboptimal. Meanwhile, the ACS algorithm can generate the optimal path from the suboptimal previous path information. Then, the proposed algorithm will combine the advantages of RRT with the ACS algorithm. Therefore, it can reach the optimal value with a good convergence speed. We call this proposed algorithm the RRT-ACS algorithm. This study developed a new method for hybridizing the RRT and ACS algorithms for path planning problems. This hybridization process is carried out using one of the ACS principles: the pseudorandom proportional rule. The performance of the proposed algorithm with the RRT*, informed RRT*, RRT*-connect, and informed RRT*-connect algorithms is tested with several benchmark cases. The test results from benchmark case tests with known optimal values indicate that the proposed algorithm has succeeded in achieving those optimal values. Furthermore, statistical tests have also been carried out to verify whether there is a significant difference in performance between the RRT-ACS algorithm and the existing algorithms. The test and statistical analysis results show that the RRT-ACS algorithm has good performance and convergence speed. We also discuss the stability, robustness, convergence, and rapidity of the RRT-ACS algorithm. The results indicates that the RRT-ACS algorithm may be used in applications that require fast and optimal path planning algorithms such as robots and autonomous vehicles.
1 January 2021 in IEEE Transactions on Instrumentation and Measurement
15 April 2024 in IEEE Access
This study proposes a path planning algorithm that combines an informed rapidly-exploring random tree (RRT*) and particle swarm optimization (PSO) algorithms. The informed RRT* algorithm can build optimal pathways quickly. However, in some cases, the informed RRT* strategy cannot help increase the convergence rate. Meanwhile, the PSO algorithm can be combined with other algorithms to improve algorithm performance. The proposed algorithm will combine the advantages of informed RRT* and PSO algorithms. The proposed algorithm is called the RRT-PSO algorithm. The RRT-PSO algorithm’s performance was compared to the informed RRT*, RRT*, RRT-ACS, and informed RRT*-connect algorithms using eight benchmark scenarios. The test results on benchmark scenarios with known optimal values demonstrate that the RRT-PSO algorithm achieves those optimal values. The statistical analysis shows that the RRT-PSO algorithm has a fast convergence rate compared to other comparison algorithms. The test results also demonstrate the RRT-PSO algorithm’s stability and robustness compared to other comparison algorithms. Our test results also show the RRT-PSO algorithm’s advantages over other PSO-based and traditional path planning algorithms. The results show that the RRT-PSO algorithm is suitable for applications requiring a fast and optimal path planning algorithm, such as self-driving cars and unmanned aerial vehicles (UAV).
1 September 2008 in Applied Soft Computing
18 May 2024 in Journal of Vibration Engineering & Technologies
Purpose: This paper proposes an in-network vibration data processing using Wireless Sensor Network (WSN) leveraging Machine Learning (ML) for damage detection and localization. The study also presents the ML algorithms comparison that is suitable to be deployed in WSN and implemented the proposed cluster-based WSN topology on the bridge simulation test. Methods: The bridge vibration data was acquired using accelerometer-based wireless sensor nodes. The data collected are transformed using Fast Fourier Transform (FFT) to obtain fundamental frequencies and their corresponding amplitudes. The machine learning method i.e., Support Vector Machine (SVM) with linear and Radial Basis Function (RBF) kernel was used to analyze the vibration data collected from the WSN. In-network data processing and cluster-based WSN topology is implemented and the programmable wireless sensor nodes is utilized in this study. Results: The experiments were conducted using real programmable wireless sensor nodes and developed our test bed bridge which makes this work different from the previous studies. The classification and predicting results shows 97%, 96%, 97%, and 96% for accuracy, precision, recall rate, and f1-score, respectively. Conclusion: Machine learning methods can potentially be combined with the vibration WSN for bridge damage detection and localization.