28 October 2019 in Applied Physics Letters
Epitaxial film quality is critical to the success of high-performance α-Ga2O3 vertical power devices. In this work, the origins of threading dislocation generation and annihilation in thick α-Ga2O3 films heteroepitaxially grown on sapphire by the mist-CVD technique have been examined by means of high-resolution X-ray diffraction and transmission electron microscopies. By increasing the nominal thickness, screw dislocations exhibit an independent characteristic with a low density of about 1.8 × 106 cm−2, while edge dislocations propagating along the c-axis are dominant, which decrease down to 2.1 × 109 cm−2 in density for an 8 μm-thick α-Ga2O3 layer and exhibit an inverse dependence on the thickness. In the framework of the glide analytical model, parallel edge dislocations are generated at the interface due to the misfit-induced strain relaxation, while the dislocation glide and coalescence result in the annihilation and fusion behaviors. The optimal thick α-Ga2O3 with low dislocation densities may provide a prospective alternative to fully realize α-Ga2O3 power devices.
1 May 2020 in Applied Surface Science
21 March 2022 in Applied Physics Letters
Epitaxial lateral overgrowth (ELO) is an effective strategy to achieve metastable phased α-Ga2O3 with low dislocation densities, which is desirable for developing ultralow-loss and ultrahigh power devices, whereas the involved dislocation dynamics have not been fully exploited. In this Letter, we investigated the dislocation propagations and reactions in α-Ga2O3 micropillar arrays selectively grown by halide vapor phase epitaxy technique. Screw dislocations in α-Ga2O3 micropillars grown from the selective area epitaxy (SAE) to ELO mode exhibited an independent character with an average density of 4.5 × 106 cm−2 while the edge dislocation density was reduced to 5.3 × 108 cm−2. During the initial SAE process, the α-Ga2O3 hexagonal pyramid is developed with the observed inversion domains within the pillar cores. The successive epitaxial lateral overgrowth ELO facilitates the formation of inclined facets upon the SiO2 mask. Almost complete filtering of the underlying threading dislocation has been demonstrated in the ELO wings. Strong image forces induced by inclined free surfaces drive the propagation and reaction of threading dislocations until annihilation, which is well described by the dislocation-filtering model during the dynamic geometry transition of micropillars. These findings may pave the way for the success of the heteroepitaxy of low dislocation density α-Ga2O3 toward the development of high-performance power devices.
8 September 2020 in Applied Physics Letters
In this Letter, we report on the evolution of electronic properties governed by epitaxial misfit strain in cubic In2O3 epilayers grown on sapphire. At elevated growth temperature, the competition between the film/substrate lattice mismatch and the thermal expansion mismatch alters the macroscopic biaxial strain from compressive to tensile. Simultaneously, the electron concentration is tuned from degeneration to non-degeneration density below the Mott criterion. The observed surface electron accumulation and metal-insulator transition result from the oxygen deficiency formed at low growth temperature, while high-temperature epitaxy is favorable to achieve remarkably enhanced mobility. The effective strain-property coupling suggests that the improved oxygen stoichiometry and the Fermi level movement controlled by the biaxial strains are responsible for the Mott transition. The strain-mediated reduction of the electron effective mass contributes to the enhanced intrinsic mobility in tensile-strained In2O3 epilayers. These results highlight that strain engineering is an effective stimulus to manipulate the transport properties of oxide semiconductors with improved performance and unexpected functionalities.
1 November 2021 in Applied Physics Letters
Heteroepitaxy of corundum-structured α-Ga2O3 and intriguing ferroelectric κ-Ga2O3 is proven as an alternative strategy to solve current challenges in heat dissipation and large-scale productivity for Ga2O3-based power electronic devices, whereas the fundamental growth dynamics and phase control of metastable Ga2O3 are still far unexplored. In this Letter, we demonstrate the strategy of strain engineering for the in situ phase manipulation of metastable Ga2O3 by embedding α-In2O3 submicrometer dots. Phase transition is modulated by the surface coverage of α-In2O3 due to the competitive growth of κ-Ga2O3 upon α-In2O3 and the homoepitaxy of α-Ga2O3 on the exposed α-Ga2O3 seed region. Upon discrete α-In2O3 submicrometer dots with a low surface coverage, the growth undergoes a nano-scale epitaxial lateral overgrowth mode, in which the selective homoepitaxy of α-Ga2O3 is dominant, and embedded α-In2O3 serves as nano-masks to prevent the threading dislocation propagation into the lateral overgrown Ga2O3 layer. In comparison, κ-Ga2O3 is energetically favorable on the interconnected α-In2O3 submicrometer dots, which are driven by the in-plane tensile strain as probed by the geometric phase analysis of transmission electron microscopy. Phase manipulation by embedded sub micrometer dots allows us to deliver high-quality Ga2O3 with well-defined phases and to conceive advanced devices with ultra-low loss, high frequency, and memorizing functionality.