Mieko Kashiwagi

Mieko Kashiwagi

Auto-generated profile, based on publicly available information

Mieko Kashiwagi

National Institutes for Quantum and Radiological Science and Technology (QST)

Research Focus & Metrics

Academic Career Length

29Years (1998-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 March 2008 in Journal of Applied Physics
Verified
Journal Article
Closed access
PDF file
NTN. Takado
N. Takado
HTH. Tobari
H. Tobari
TIT. Inoue
T. Inoue
JHJ. Hanatani
J. Hanatani
AHA. Hatayama
A. Hatayama
KSK. Sakamoto
K. Sakamoto
The production and transport processes of H0 atoms are numerically simulated using a three-dimensional Monte Carlo transport code. The code is applied to the large JAEA 10ampere negative ion source under the Cs-seeded condition to obtain a spatial distribution of surface-produced H− ions. In this analysis, the amount of H0 atoms produced through dissociation processes of H2 molecules is calculated from the electron temperature and density obtained by Langmuir probe measurements. The high-energy tail of electrons, which greatly affects H0 atom production, is taken into account by fitting a single-probe characteristic as a two-temperature Maxwellian distribution. In the H0 atom transport process, the energy relaxation of the H0 atoms, which affects the surface H− ion production rate, is taken into account. The result indicates that the surface H− ion production is enhanced near the high-electron-temperature region where H0 atom production is localized.

26 November 2013 in Review of Scientific Instruments
Verified
Journal Article
Closed access
AKA. Kojima
A. Kojima
MHM. Hanada
M. Hanada
MYM. Yoshida
M. Yoshida
HTH. Tobari
H. Tobari
MKM. Kashiwagi
M. Kashiwagi
LGL. R. Grisham
L. R. Grisham
Long pulse beam extraction with a current density of 120 A/m2 for 100 s has been achieved with a newly developed plasma grid (PG) for the JT-60SA negative ion source which is designed to produce high power and long pulse beams with a negative ion current of 130 A/m2 (22 A) and a pulse length of 100 s. The PG temperature is regulated by fluorinated fluids in order to keep the high PG temperature for the cesium-seeded negative ion production. The time constant for temperature controllability of the PG was measured to be below 10 s, which was mainly determined by the heat transfer coefficient of the fluorinated fluid. The measured decay time of the negative ion current extracted from the actively temperature-controlled PG was 430 s which was sufficient for the JT-60SA requirement, and much longer than that by inertial-cooling PG of 60 s. Obtained results of the long pulse capability are utilized to design the full size PG for the JT-60SA negative ion source.

1 May 2022 in Review of Scientific Instruments
Verified
Journal Article
Closed access
MKM. Kashiwagi
M. Kashiwagi
MKM. Kisaki
M. Kisaki
GSG. Q. Saquilayan
G. Q. Saquilayan
AKA. Kojima
A. Kojima
JHJ. Hiratsuka
J. Hiratsuka
HTH. Tobari
H. Tobari
A beam optics study using the ITER-relevant high intense negative ion beams, such as 1 MeV, 200 A/m2, has been performed experimentally and analytically using a multi-aperture and five-stage accelerator. Initially, multi-beamlets generated from this accelerator were deflected in various directions due to the magnetic field and space charge repulsion between beams and showed various divergences. These had limited the pulse length and the beam energy. Compensation methods of the beamlet deflections have worked effectively and contributed to achieving the ITER requirement, the divergence angle of <7 mrad, and the deflection angle of <1 mrad for 1 MeV beam. The beam pulse has been gradually extended from 1 to 100 s and is now going to a longer pulse based on these results. One of the remaining issues is to understand and suppress peripheral components of the beam, namely, the halo, and to reduce the local heat loads observed around the aperture edge. This halo component has been successfully distinguished from the beam core by using a newly developed beam emittance measurement system for high intense beams. By combining this measured beam emittance and the beam simulation, it was clarified for the first time that the halo components are generated in an area of 1 mm width from the aperture edge.

1 January 2007 in Plasma and Fusion Research
Verified
Journal Article
Open access
PDF file
HTHiroyuki Tobari
Hiroyuki Tobari
TSTakayoshi Seki
Takayoshi Seki
NTNaoyuki Takado
Naoyuki Takado
MHMasaya Hanada
Masaya Hanada
TITakashi Inoue
Takashi Inoue
KSKeishi Sakamoto
Keishi Sakamoto
Japan's largest platform for academic e-journals: J-STAGE is a full text database for reviewed academic papers published by Japanese societies

1 February 2008 in Review of Scientific Instruments
Verified
Journal Article
Closed access
MTM. Taniguchi
M. Taniguchi
TIT. Inoue
T. Inoue
NUN. Umeda
N. Umeda
MKM. Kashiwagi
M. Kashiwagi
KWK. Watanabe
K. Watanabe
KSK. Sakamoto
K. Sakamoto
The H− ion accelerator R&D to realize the international thermonuclear experimental reactor neutral beam is ongoing at Japan Atomic Energy Agency (JAEA). The required performance for the prototype MeV accelerator developed at JAEA is 1MeV , 500mA (current density of 200A∕m2 ) H− ion beam at the beamlet divergence angle of less than 7mrad . Up to 2005, 836keV , 146A∕m2 H− ion beam was successfully accelerated as the highest record of the current density at MeV class energy beams. In the present work, high current negative ion beam acceleration test was performed by increasing the beam extraction apertures from 3×3 (9 apertures) to 3×5 (15 apertures). By fixing the air leak at the source chamber due to backstream ions as well as the improvement of voltage holding capability by a new fiber reinforced plastic insulator ring, the performance of the MeV accelerator was improved. So far, H− ion beam of 320mA was successfully accelerated up to 796keV with the beam divergence angle of 5.5mrad . The accelerated drain current including the electron reaches close to the power supply limit for the MeV test facility. The heat flux by the backstream ion during the above beam acceleration was estimated to be 360W∕cm2 . The Cs leakage to the accelerator during the test campaign (Cs total input of 5.0g ) was 0.26mg (7.0μg∕cm2) . This is considered to be the allowable level from the viewpoint of voltage holding.

5 February 2009
Verified
Conference Paper
Closed access
PDF file
RFRieko Fukushima
Rieko Fukushima
KTKazuki Taira
Kazuki Taira
TSTatsuo Saishu
Tatsuo Saishu
YMYoshiharu Momonoi
Yoshiharu Momonoi
MKM Kashiwagi
M Kashiwagi
YHYuzo Hirayama
Yuzo Hirayama
A display system with lens arrays at the front of a high-resolution LCD has been known as a method to realize an autostereoscopic three-dimensional (3D) display. In these displays, a light ray overlap between neighboring parallax images affects the image quality. In this study, the overlap effects were investigated for the one-dimensional (horizontal parallax only) integral imaging (1D-II) method. We fabricated samples of 1D-II displays with different levels of light ray overlaps and evaluated the 3D image by subjective assessment. It is found that the 1D-II display utilizing the proper parallax overlaps can eliminate banding artifact and have good 3D image quality within the wide range of a viewing area.