A fully 3D failure model to predict damage in composite structures subjected to multiaxial loading is presented in this paper. The formulation incorporates shear nonlinearities effects, irreversible strains, damage and strain rate effects by using a viscoplastic damageable constitutive law. The proposed formulation enables the prediction of failure initiation and failure propagation by combining stress‐based, damage mechanics and fracture mechanics approaches within an unified energy based context. An objectivity algorithm has been embedded into the formulation to avoid problems associated with strain localization and mesh dependence. The proposed model has been implemented into ABAQUS/Explicit FE code within brick elements as a userdefined material model. Numerical predictions for standard uniaxial tests at element and coupon levels are presented and discussed.
Currently, the standard delamination tests established by ASTM (available for mode I and mix mode) are limited to unidirectional composites. Although some researchers have conducted delamination tests in woven composites, their information is still limited. In order to understand the propagation behavior and the value of fracture toughness of woven composites, this article evaluated a 5HS carbon/epoxy composite with a weft-dominated surface. Tests were conducted in double cantilever beam and end notch flexure configurations using an energy-based approach for data reduction in modes I and II, respectively. The results were assessed in terms of delamination resistance curves (R-curves). Both delamination modes showed consistent behaviors for extending the application of the standard procedures, as the energy variation can describe well the crack growth dependence of the irregular surface caused by the crimp, which was more pronounced for mode I.