1 February 2018 in International Journal of Electrical Power & Energy Systems
19 December 2019 in IET Generation, Transmission & Distribution
In this study, the design and implementation of a new hybrid soft computing control technique called Levenberg–Marquardt backpropagation (LMBP)‐based icosϕ is proposed. Two different compensation techniques are evaluated for the performance analysis of three‐phase three‐wire (3P3W) voltage source converter (VSC)‐based DSTATCOM. The first one is the conventional icosϕ control technique whereas the other one is called the LMBP‐based icosϕ control technique. The better power quality of the system is obtained using the proposed control algorithm by maintaining a less voltage across the capacitor as compared to the conventional one. So, the reduction in the size of the DSTATCOM is realised by the LMBP‐based control algorithm. Furthermore, the performance parameters such as load balancing, harmonics elimination, power factor improvement, and voltage regulation are evaluated under both balanced and unbalanced loading conditions as per the IEEE guidelines. The effectiveness of the proposed controller is studied in the MATLAB/Simulink environment and also validated with a low power rated prototype experimental results.
25 March 2020 in IET Generation, Transmission & Distribution
Superconducting magnetic energy storage (SMES) system is one of the efficient pulsed power compensators. Its response to the load fluctuations is faster and competent. This study proposes a non‐linear dynamic evolution control (NDEC) approach for SMES system. The control approach is implemented to regulate the error of three‐phase compensating current and DC‐link voltage. The control functions required for voltage source inverter (VSI) and bi‐directional DC–DC converter of the SMES system are derived using the NDEC control approach. A proportional–integral (PI) controller is replaced by the NDEC in the inner loop of a traditional pulse‐width‐modulation control strategy of VSI for the quick response and effective energy exchange. The elementary idea of implementing NDEC is to govern the system dynamics by maintaining a zero‐error state irrespective of load uncertainties quickly. Detrimental high rating stress on the system due to pulsed power load is substantially reduced with the proposed NDEC strategy. Source current is maintained almost balanced and harmonic‐free in order to ensure a quality and reliable supply to surrounding loads. The variation in source current is drastically reduced from 260 to 6% using the proposed system. Moreover, a comparative study between PI and NDEC‐based control scheme is presented using MATLAB simulation and experimental results.
26 September 2018 in International Transactions on Electrical Energy Systems