Surface passivation of germanium is vital for optimal performance of Ge based optoelectronic devices especially considering their rapidly increasing surface-to-volume ratios. In this work, we have investigated the surface passivation of Ge by a stack consisting of a thin layer of hydrogenated amorphous silicon (a-Si:H) and an aluminum oxide (Al2O3) capping layer. Plasma-enhanced chemical vapor deposition was used to deposit the a-Si:H (0–10 nm), while thermal and plasma-enhanced atomic layer deposition (ALD) were employed for the Al2O3 films (0–22 nm). Transient photoconductance decay measurements revealed a recombination velocity as low as 2.7 cm s−1 for an a-Si:H layer as thin as 1.8 nm and an Al2O3 film of only ∼6 nm. In this state-of-the-art passivation scheme, the plasma-enhanced ALD process for the Al2O3 capping layer proved superior to the thermal ALD process since it resulted in an exceptionally high negative fixed charge density (Qf∼ 1013 cm−2), which proved a key factor for the low surface recombination velocity. Transmission electron microscopy and energy x-ray dispersion revealed that a thin SiOx layer (∼1.4 nm) forms between a-Si:H and Al2O3 during the ALD process, which is thought to be the origin of this high negative fixed charge density. This passivation stack is regarded as highly interesting for applications such as solar cells, nanolasers, and nano-LEDs based on p-type Ge.
19 November 2024 in Journal of Vacuum Science & Technology A
Semiconductors are key to our modern society, enabling a myriad of fields, including electronics, photovoltaics, and photonics. The performance of semiconductor devices can be significantly hampered by defects occurring at the surfaces and interfaces of the semiconductor. As semiconductor devices continue to be scaled and nanostructuring is becoming more commonplace, such defects are increasingly becoming the limiting factor in the device performance. Surface passivation can be used to reduce the number of defects and improve device performance. However, effective surface passivation approaches and requirements can vary greatly depending on the semiconductor material and the envisioned application. In this review, we aim to bring together the separated fields of research on passivation of various semiconductor materials by drawing parallels and highlighting important differences in these fields. To this end, we focus on passivation of silicon, germanium, gallium arsenide, indium phosphide, and gallium nitride. For silicon, a high-quality interface with few defects is relatively straightforward to obtain, and the remaining defects at the surface can be further passivated by hydrogen. For germanium and III–V semiconductors, it is more challenging to form a high-quality interface, and the role of hydrogen for defect passivation is less clear. Nevertheless, similar surface passivation approaches are used for these various semiconductors, and mainly focus on interface management, involving the use of passivation layers combined with surface treatments and/or interlayers. Understanding and extending the toolbox of semiconductor surface passivation will be of great value for effective passivation of current and future semiconductor devices.
12 October 2021 in ACS Applied Electronic Materials
Phosphorus oxide (POx) capped by aluminum oxide (Al2O3) has recently been discovered to provide excellent surface passivation of crystalline silicon (c-Si). In this work, insights into the passivation mechanism of POx/Al2O3 stacks are gained through a systematic study of the influence of deposition temperature (Tdep = 100–300 °C) and annealing temperature (Tann = 200–500 °C) on the material and interface properties. It is found that employing lower deposition temperatures enables an improved passivation quality after annealing. Bulk composition, density, and optical properties vary only slightly with deposition temperature, but bonding configurations are found to be sensitive to temperature and correlated with the interface defect density (Dit), which is reduced at lower deposition temperature. The fixed charge density (Qf) is in the range of + (3–9) × 1012 cm–2 and is not significantly altered by annealing, which indicates that the positively charged entities are generated during deposition. In contrast, Dit decreases by 3 orders of magnitude (∼1013 to ∼1010 eV–1 cm–2) upon annealing. This excellent chemical passivation is found to be related to surface passivation provided by hydrogen, and mixing of aluminum into the POx layer, leading to the formation of AlPO4 upon annealing.
Monolithic integration of silicon-based electronics and photonics could open the door toward many opportunities including on-chip optical data communication and large-scale application of light-based sensing devices in healthcare and automotive; by some, it is considered the Holy Grail of silicon photonics. The monolithic integration is, however, severely hampered by the inability of Si to efficiently emit light. Recently, important progress has been made by the demonstration of efficient light emission from direct-bandgap hexagonal SiGe (hex-SiGe) alloy nanowires. For this promising material, realized by employing a nanowire structure, many challenges and open questions remain before a large-scale application can be realized. Considering that for other direct-bandgap materials like GaAs, surface recombination can be a true bottleneck, one of the open questions is the importance of surface recombination for the photoluminescence efficiency of this new material. In this work, temperature-dependent photoluminescence measurements were performed on both hex-Ge and hex-SiGe nanowires with and without surface passivation schemes that have been well documented and proven effective on cubic silicon and germanium to elucidate whether and to what extent the internal quantum efficiency (IQE) of the wires can be improved. Additionally, time-resolved photoluminescence (TRPL) measurements were performed on unpassivated hex-SiGe nanowires as a function of their diameter. The dependence of the surface recombination on the SiGe composition could, however, not be yet addressed given the sample-to-sample variations of the state-of-the-art hex-SiGe nanowires. With the aforementioned experiments, we demonstrate that at room temperature, under high excitation conditions (a few kW cm-2), the hex-(Si)Ge surface is most likely not a bottleneck for efficient radiative emission under relatively high excitation conditions. This is an important asset for future hex(Si)Ge optoelectronic devices, specifically for nanolasers.
The interest in germanium (Ge) is rising for use in field-effect transistors, (space) photovoltaics, and silicon photonics. Suppressing and understanding carrier recombination at the Ge surface are vital for the performance of Ge in these applications. In this work, we have investigated the surface recombination at various germanium–dielectric interfaces (Ge/Al2O3, Ge/SiNx, Ge/GeOx/Al2O3, and Ge/a-Si:H/Al2O3). For this purpose, we performed corona-lifetime experiments and extracted a set of recombination parameters by fitting the data with the theoretical Girisch model. To keep the model straightforward, the distributions of the capture cross sections and the interface defect density were parameterized. The importance of each parameter in these distributions was examined so that a minimum number of parameters was distilled: the so-called fundamental recombination velocities ( and ) and the magnitude of the near the valence and conduction band edge ( and ). These parameters form together with the fixed charge density , the spatial distribution thereof , and a minimum surface recombination velocity , a set of parameters that can well describe our experimental data. Relevant insights were obtained from the experiments, with highlights including a Ge/GeOx/Al2O3 stack with virtually no fixed charge density, a highly passivating Ge/a-Si:H/Al2O3 stack, and a negatively charged Ge/SiNx stack. The findings in this study are valuable for applications where a more profound understanding of recombination at Ge surfaces is of concern, such as in photonics, photovoltaics, and nano-electronics.
4 August 2022 in Solar Energy Materials and Solar Cells