16 March 2023 in Progress in Additive Manufacturing
The study presents the crack mouth opening and propagation of cracks in a composite material printed by material extrusion subjected to monotonic loading. The composite material is made out of a nylon matrix (with embedded short carbon fiber—called Onyx®) and reinforced with continuous Kevlar fibers. Three-point bending tests were performed on notched specimens built according to ASTM-E399. Tests were digitally recorded to extract crack opening displacement (COD) and crack length data through image treatment techniques (using ImageJ), and results were analyzed using linear elastic fracture mechanics parameters through the use of COD. Therefore, the crack mouth opening was established, and fracture toughness was found to be 46 MPa√m. Additionally, microscopy analysis identified fracture zones, crack initiation, transition, and final rupture. The observed failure mechanisms were matrix cracking, fiber pull-out, fiber breakage, and defects such as non-proper fiber-matrix bonding.
12 February 2018 in Inverse Problems in Science and Engineering
This work is aimed at building models to predict the bending vibrations of stranded cables used in high-voltage transmission lines. The present approach encompasses model calibration, validation and selection based on a statistical framework. Model calibration is tackled using a Bayesian framework and the Delayed Rejection Adaptive Metropolis (DRAM) sampling algorithm is employed to explore the posterior probability of the unknown model parameters. Two model classes are proposed to predict the bending vibrations of a typical high-voltage stranded cable. Both model classes account for the aerodynamic damping with the surrounding medium and the bending stiffness of the cable. The difference between the two relies on the damping model chosen to quantify the energy dissipation due to friction among the constituent wires of the cable. Model ranking is rigorously quantified by means of a Bayesian model class selection approach, in which both the data-fitting capability and complexity of each model class are simultaneously taken into account. Experimental tests are performed on a laboratory span with a typical high-voltage stranded cable. The measured frequency response functions are the observable quantities employed in the Bayesian model updating for the two model classes proposed. Both model classes provide comparable and accurate predictions for the cable’s frequency response functions within the range [5, 25] Hz, with the fractional derivative-based model class providing the most accurate predictions. Nonetheless, both model classes failed to accurately reproduce the measured cable’s dynamic response within the frequency range [25, 30] Hz.
29 July 2026 in SSRN Electronic Journal
This work presents a computational multiscale framework for the analysis of bio-inspired hierarchical structures, integrating nanoscale homogenization, microscale structural transformations, and mesoscale tensor embedding within a unified finite element formulation. The approach is designed to overcome the computational limitations associated with explicitly resolving complex mesoscale geometries. The nanoscale constitutive behavior is obtained using a Mori-Tanaka homogenization scheme, while the microscale response incorporates Bouligand architecture, lamellar waviness, and Z-pinning mechanisms. At the mesoscale, structural effects are introduced through a tensor-level embedding strategy, enabling the representation of load-path activation and geometric confinement without increasing model complexity. The framework is implemented using a computational pipeline that combines geometry reconstruction from microscopy data, mesh generation with millions of elements, and large-scale finite element simulations. Numerical consistency is verified through mesh convergence analysis using Richardson extrapolation and the Grid Convergence Index. Model validation is performed against experimental force-displacement curves, showing that the microorthotropic model significantly underestimates stiffness, whereas the proposed mesoscale-enhanced formulation accurately reproduces the structural response up to the pre-critical regime. The results demonstrate that a substantial portion of the effective stiffness arises from mesoscale structural mechanisms, which cannot be captured through classical homogenization alone. The proposed framework provides a computationally efficient alternative to fully resolved multiscale simulations and can be extended to other hierarchical materials and complex structural systems.
4 December 2023 in Ciencia Latina Revista Científica Multidisciplinar
La Realidad Aumentada (RA) es una tecnología que proporciona experiencias interactivas al usuario superponiendo objetos virtuales en un ambiente real. En este trabajo se presenta una herramienta desarrollada usando realidad aumentada para el estudio y enseñanza de manipuladores robóticos, dirigida especialmente a universidades sin los recursos económicos para adquirir un manipulador serial. Fueron desarrollados tres programas que le permiten al estudiante visualizar y rectificar conceptos esenciales de la robótica como: transformación de sistemas coordenados, metodología de Denavit – Hartenberg, configuración de un manipulador robótico, entre otros. El aplicativo permite al estudiante interactuar de manera virtual con diferentes manipuladores, controlando mediante el uso del teclado las articulaciones del robot, y visualizando en pantalla en tiempo real distancias y parámetros respecto a un sistema coordenado fijo. Teniendo en cuenta que los manipuladores se encuentran renderizados, es posible realizar análisis de trayectoria y colisiones en un recorrido dado por el usuario. El aplicativo es fácilmente modificable, lo que permite la inclusión de nuevos manipuladores y el desarrollo de estrategias innovadoras.
14 August 2026 in SSRN Electronic Journal
The elytra of the diabolical ironclad beetle (Phloeodes diabolicus) sustain compressive forces of approximately 39,000 times body weight through hierarchical architecture spanning four length scales: α-chitin nanofibers in protein matrix, helicoidal Bouligand lamellae, trabecular network, and interlocking medial-suture geometry. Despite extensive experimental characterization, no predictive multiscale framework has linked SEM-derived morphology to compressive response. Here we develop such a framework, verify it numerically, and calibrate it transparently, keeping predicted (homogenized) and calibrated (effective) contributions explicitly separate. Continuous α-chitin fibers (E_f = 110 GPa) are homogenized with protein matrix (E_m = 2.0 GPa) using analytical Mori–Tanaka expressions, yielding a transversely-isotropic nanoscale tensor (E_L = 39.81 GPa, E_T = 4.05 GPa, G_LT = 1.50 GPa). At the microscale, Bouligand averaging with tensorial waviness correction A(λ,h) recovers in-plane near-isotropy of the elytron. At meso/macroscale, a high-fidelity FEniCSx finite-element model assigns an anisotropic constitutive tensor. The framework captures pre-critical response (U < 0.5 mm) with 23–25% mean error, substantially improving baseline predictions. An effective mesoscale contribution to out-of-plane stiffness, ΔC₃₃ ≈ 5–6 GPa, is identified by calibration. The framework is presented as a reproducible, numerically verified methodological tool for multiscale prediction of hierarchical biological materials when destructive testing is infeasible.