27 August 2025 in IEEE Transactions on Electron Devices
Semiconductor opening switches are solid-state devices capable of delivering nanosecond, hundreds of kilovolts pulses by interrupting kiloamps of current. The interruption of the current occurs in a moderately doped p-region when a high electric field region (HFR) is formed. The HFR occurs because the reverse pumping current cannot be supported by the saturation velocity and majority carrier concentration of the doping level. However, the donor profile also significantly affects the pulse performance. A secondary prepulse occurs if a secondary HFR is formed at the interface of the background n-doping and N+ doping ( ${\mathrm {X}}_{\text {n}}\text {)}$ . By moving the location of Xn deeper into the diode, the effect of the prepulse is reduced. This article investigates the effect of the donor doping profile on the performance metrics of semiconductor opening switches through technology computer-aided design (TCAD) simulations and experimental results. Through a SILVACO TCAD optimization, we designed a P+/p/n-base/n/N+ where the intersection of the moderate p-region and intrinsic n-base region ( ${\mathrm {X}}_{\text {p}}\text {)}$ is at 160 $\mu $ m and Xn is at 220 $\mu $ m. This profile is fabricated via silicon epitaxy. Experimentally, it is shown that a deep Xn (220 $\mu $ m) compared with a shallow Xn (300 $\mu $ m) reduces the rise time by $\gt 5\times $ . In addition, the magnitude of current density during interruption affects the prepulse foot and pulse shape. At lower current densities without the graded donor profile, high peak voltages are not achieved. Comparing the experimental results to the TCAD simulations shows that the model is predictive under high-current densities in the semiconductor opening switch (SOS) regime.
12 November 2026 in Journal of Applied Physics
Semiconductor opening switches (SOSs) are pulsed power components that enable high-power, high repetition rate switching with ns switching times, but require deep junctions that can be onerous to manufacture using diffusion methods. We demonstrate an 80 μm GaAs SOS diode with a ∼38 μm deep junction grown under 1 h by halide vapor phase epitaxy. Graded p-type doping was achieved using dimethylzinc, while the n-type background doping was utilized for the n-type side of the junction. The diode doping profile was characterized using electrochemical capacitance-voltage, and scanning Kelvin probe force microscopy was used to identify the shape and depth of the junction. Single and multiple diode stacks were processed and then characterized with a pulser circuit to evaluate their SOS performance. A six-diode stack generated a 2.5 kV pulse cutting off a peak current density of 6.8 kA/cm2. Circuit gain ranged from 6 to 11, decreasing with input bias. Rise time as low as 900 ps and repetition rates of 4 MHz were achieved. The choice of GaAs opens a new application space for SOS devices with narrow pulses and high repetition rates.