Qinghui Shao

Qinghui Shao

Auto-generated profile, based on publicly available information

Qinghui Shao

Materials Engineering Division, Lawrence Livermore National Laboratory, Livermore, CA, USA

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 January 2024 in IEEE Transactions on Electron Devices
Verified
Journal Article
Open access
KDKaren M. Dowling
Karen M. Dowling
BCBikramjit Chatterjee
Bikramjit Chatterjee
SGSoroush Ghandiparsi
Soroush Ghandiparsi
QSQinghui Shao
Qinghui Shao
JVJoel Varley
Joel Varley
LVLars Voss
Lars Voss
We present iron-doped beta gallium oxide (Fe- $\beta $ Ga $_{{\text{2}}}$ O $_{{\text{3}}}$ ) as a candidate for photoconductive semiconductor switches (PCSSs) with sub-bandgap light. From a commercially available Fe- $\beta $ Ga $_{{\text{2}}}$ O $_{{\text{3}}}$ wafer, we first did material characterization. This included measurements of absorption coefficient and dopant composition, carrier activation energy up to 200 $^{\circ}$ C, break down field of planar electrodes (limited from material passivation), and free carrier recombination lifetime, and thermal effects up to 203 $^{\circ}$ C on photocurrent with a 447 nm light emitting diode (LED) source. We then demonstrated pulsed operation of a Fe- $\beta $ Ga $_{\text{2}}$ O $_{\text{3}}$ PCSS under different sub-bandgap wavelengths (355, 532, and 1064 nm) and sub-ns pulses. Fe- $\beta $ Ga $_{\text{2}}$ O $_{\text{3}}$ is a candidate for high temperature PCSS with 355 nm responsivity of 7 $\times$ 10 $^{-\text{7}}$ A-cm/W-kV at room temperature and up to 5.5 $\times$ 10 $^{-\text{4}}$ A-cm/W-kV at 200 $^{\circ}$ C. From these investigations, we discuss a simple trap model to describe the illumination process of the PCSS. Fe- $\beta $ Ga $_{\text{2}}$ O $_{\text{3}}$ has a high breakdown field and has moderate responsivity characteristics, but the dark current at high temperature leads to low photo-to-dark current ratio (PDCR). Regardless, we verify its potential as a PCSS material for harsh environment applications.

28 May 2024 in Journal of Applied Physics
Verified
Journal Article
Open access
PDF file
ZXZhiyu Xu
Zhiyu Xu
MDMatthias A. Daeumer
Matthias A. Daeumer
MCMinkyu Cho
Minkyu Cho
JYJae-Hyuck Yoo
Jae-Hyuck Yoo
TDTheeradetch Detchprohm
Theeradetch Detchprohm
SSShyh-Chiang Shen
Shyh-Chiang Shen
This work reports analysis of the reverse-bias breakdown characteristics of homojunction gallium nitride (GaN) p–i–n (PIN) rectifiers fabricated on bulk GaN substrates. Sub-bandgap photoluminescence mapping at room temperature as a contactless, non-destructive wafer inspection method was performed to analyze the impact of material properties on grown GaN PIN diodes and to study the correlation between defect types and breakdown characteristics of vertical GaN PIN rectifiers. Under the sub-bandgap excitation, yellow luminescence is dominant. The premature breakdown characteristics of the fabricated kV-class vertical GaN PIN rectifiers with nitrogen-implanted floating guard rings are found to be associated with material defects and deep level complexes. Photoluminescence mapping has demonstrated its effectiveness in quantitative analysis of dislocations and other types of defects.

11 July 2025 in IEEE Transactions on Plasma Science
Verified
Journal Article
Closed access
BEB. Esser
B. Esser
JSJacob Stephens
Jacob Stephens
JDJames Dickens
James Dickens
ANAndreas Neuber
Andreas Neuber
JMJohn Mankowski
John Mankowski
SHS. Heidger
S. Heidger
The performance of semiconductor opening switch (SOS) diodes with different doping profiles is assessed with the primary aim of enhancing or substituting hard-to-find devices. SOS devices are capable of providing long lifetime, gigawatt level pulses in generators with risetimes on the nanosecond scale with pulse widths on the order of 20 ns. An experimental testbed is described which allows for rapid testing of diodes with control of the forward pumping time which is a crucial parameter of SOS diodes. A saturable pulse transformer provides both the initial voltage multiplication and reverse current pulse required to drive SOS diodes. Voltage multiplication ratios of 16:1 were achieved with a modest charging voltage of 800 V and simple circuitry. With current densities of up to 1.4 kA $\cdot $ $\text{cm}^{\text {-2}}$ , the testbed produces 10 kV output pulses into a $56~\Omega $ load with a pulsewidth of 16 ns and delivered power of up to 1.9 MW. These novel devices are compared to legacy SOS diodes originating from Russia, with one of the profiles yielding increased performance. These profiles are studied in hopes of creating manufacturing demand to augment the availability of these useful devices.

6 March 2026 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
SGSoroush Ghandiparsi
Soroush Ghandiparsi
QSQinghui Shao
Qinghui Shao
CCCaitlin A. Chapin
Caitlin A. Chapin
LLLaura Leos
Laura Leos
JSJoseph D. Schneider
Joseph D. Schneider
LVLars Voss
Lars Voss
Highly resistive gallium nitride (GaN) is an essential material for power optoelectronic applications. While carbon doping is widely used to achieve semi-insulating properties in GaN, the persistent photoconductivity (PPC) arising from deep-level defect traps remains a major obstacle for high-speed power switching. This study demonstrates a novel approach: leveraging the ultrahigh photoresponsivity of GaN:C (up to 2.1 A $\cdot $ cm/W $\cdot $ kV, surpassing alternatives such as GaN:Fe) and employing defect-selective optical control to effectively quench the PPC. By synchronizing a short infrared (1064 nm) quenching pulse with UV (385 nm) excitation in an epitaxially grown GaN:C layer on a heavily doped n-type GaN substrate, we achieve a dramatic reduction in photocurrent fall time by approximately $293\times $ (from 470 to 1.6 $\mu $ s), increasing modulation bandwidth from 745 Hz to nearly 218 kHz. This advancement not only establishes a new pathway for controlling PPC in GaN:C but also enables the practical integration of GaN:C in fast power switching devices. Enhanced modulation bandwidth, along with GaN:C excellent photoresponsivity, makes it a promising candidate for optically controlled high-voltage, high-power electronic systems, such as photoconductive semiconductor switches (PCSSs) used in pulsed-power drivers, high-power microwave (HPM) sources, and high-voltage gate drivers for wide bandgap (WBG) power electronics.

27 August 2025 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
CCCaitlin A. Chapin
Caitlin A. Chapin
QSQinghui Shao
Qinghui Shao
DLDario Labrada
Dario Labrada
DSDavid O. Smith
David O. Smith
JMJohn Monzon
John Monzon
LVLars Voss
Lars Voss
Semiconductor opening switches are solid-state devices capable of delivering nanosecond, hundreds of kilovolts pulses by interrupting kiloamps of current. The interruption of the current occurs in a moderately doped p-region when a high electric field region (HFR) is formed. The HFR occurs because the reverse pumping current cannot be supported by the saturation velocity and majority carrier concentration of the doping level. However, the donor profile also significantly affects the pulse performance. A secondary prepulse occurs if a secondary HFR is formed at the interface of the background n-doping and N+ doping ( ${\mathrm {X}}_{\text {n}}\text {)}$ . By moving the location of Xn deeper into the diode, the effect of the prepulse is reduced. This article investigates the effect of the donor doping profile on the performance metrics of semiconductor opening switches through technology computer-aided design (TCAD) simulations and experimental results. Through a SILVACO TCAD optimization, we designed a P+/p/n-base/n/N+ where the intersection of the moderate p-region and intrinsic n-base region ( ${\mathrm {X}}_{\text {p}}\text {)}$ is at 160 $\mu $ m and Xn is at 220 $\mu $ m. This profile is fabricated via silicon epitaxy. Experimentally, it is shown that a deep Xn (220 $\mu $ m) compared with a shallow Xn (300 $\mu $ m) reduces the rise time by $\gt 5\times $ . In addition, the magnitude of current density during interruption affects the prepulse foot and pulse shape. At lower current densities without the graded donor profile, high peak voltages are not achieved. Comparing the experimental results to the TCAD simulations shows that the model is predictive under high-current densities in the semiconductor opening switch (SOS) regime.

9 June 2026 in Physica Status Solidi (a)
Verified
Journal Article
Open access
PDF file
SNSoumak Nandi
Soumak Nandi
EWEthan White
Ethan White
QSQinghui Shao
Qinghui Shao
BCBikramjit Chatterjee
Bikramjit Chatterjee
CFClint D. Frye
Clint D. Frye
SRShaloo Rakheja
Shaloo Rakheja
In this work, we present the theory and modeling framework of a diamond optically gated junction field-effect transistor (DOGFET). The device utilizes nitrogen substitutional centers in type-1b diamond to optically modulate a p- boron doped diamond channel. Using sub-gap lasers with intensities as low as 100 W/cm 2 $^2$ , electrons are optically excited from substitutional nitrogen sites to the conduction band of the diamond substrate, thus enabling the optical gate to exercise control on modulating the space-charge region at the junction and therefore the channel conductivity. We show that the device can deliver a current of 7 μA / μm, or equivalently 1750 A/cm 2 $^{2}$ , while switching at a frequency greater than 100 kHz, in a form factor of 5 μm 2 . The breakdown voltage is found to be greater than 1850 V, with a breakdown field strength of ∼ $\sim$ 13 MV/cm. Moreover, the device supports nonvolatile operation with a “memory effect” enabling single transistor state retention. The presented simulation framework provides a physically grounded insight into the limits and opportunities of optoelectronic diamond systems.