12 March 2021 in Journal of Materials Engineering and Performance
22 December 2022 in Journal of Composite Materials
ARAndrea Del Pilar Fabra Rivera
Andrea Del Pilar Fabra Rivera
JRJuan Carlos Campos Rubio
Due to their ability to manufacture highly complex geometries, additive manufacturing technologies have applications in several industrial sectors, such as aerospace, automotive, biomedical and electronics. However, parts made of pure polymeric materials may have limitations in their applications because of the shortcomings in their mechanical properties. Thus, polymer matrix composite materials are used as an alternative to obtaining better technical characteristics, especially for parts obtained by additive manufacturing. In this work, the influence of reinforcement and printing orientation on the mechanical behavior of samples manufactured using filaments of PLA/20 wt% Al (Aluminum microparticles) and PLA/20 wt% CF (carbon fiber reinforcement) were studied. The samples were manufactured using fused deposition modelling (FDM) technology. Tests were carried out to analyze the mechanical behavior of the studied materials, such as tensile, compression, and bending. The results obtained from the mechanical tests of the reinforced filaments were compared with the results on the mechanical performance of pure PLA. The results showed the influence of the type of reinforcement, namely short fibers or microparticles, is evident. The tensile strength, compressive strength, and flexural strength were primarily influenced by the type of reinforcement and Young’s modulus was predominantly influenced by the printing angle and type of reinforcement. The fracture mechanism of composite specimens was infill gaps and interface.
26 September 2023 in The International Journal of Advanced Manufacturing Technology
18 May 2022 in Modelling and Simulation in Materials Science and Engineering
Finite element analysis is a widely used simulation technique to analyze structural components and the mechanical behavior of materials under different loading conditions. The major steps involved in finite element simulations are the definition of the basic parameters and the discretization in elements of the component, also known as preprocessing, the analysis of the models and the post-processing by the representation and the interpretation of the obtained results. On the particular case of complex geometries obtained by fused deposition modeling, the most time consuming of these three steps is that of preprocessing, because on traditional finite element technology is require that the real geometry of the CAD model is simplified to be meshed and analyzed. Nowadays, different techniques have been proposed and developed with this objective: reduce costs in terms of time and specialized human resources because the workflow is easier and simpler. One of these methods is known as the meshless method, which do not require connection between nodes and are based on the interaction of the points of the geometry with the neighbors, so the processor analyzes the real CAD geometry and no simplifications are needed. The present work uses the meshless method based on the theory of external approximation as an alternative to the classic finite element method. In numerical simulations, the influence of core shape is evaluated on the failure mode of the 3D-printed lightweight structures. Three cell core patterns were numerically evaluated under tensile and three-point bending tests: out-of-plane hexagonal honeycomb, S-shape corrugated, and in-plane hexagonal honeycomb cores. The nucleation and propagation of cracks had more heterogeneous profiles for in-plane hexagonal honeycomb cores, showing greater unpredictability in the susceptible areas to failure. The numerical analysis with the meshless method showed a potential for a fast prediction and a low computational cost analysis.
12 October 2022 in Journal of Tribology
This work presents an experimental–numerical approach aimed at determining the chip–tool contact length during orthogonal cutting of annealed AISI 4340 steel (223 HV) with TiN-coated tungsten carbide inserts. Initially, pin-on-disc tests were performed, followed by orthogonal cutting tests. The components of the cutting force were used to calculate the coefficient of friction in orthogonal cutting, and its value was compared with those obtained under sliding. Moreover, the cutting force components obtained experimentally were used to assess the reliability of the finite element model and estimate the temperature in the cutting zone. The contact length between chip and rake face was calculated based on the experimental feed force and shear strength of the work material and was compared with the results provided by an analytical model. The experimental–numerical approach can be considered more accurate due to the fact that it considers the effect of the tool–chip interface temperature on the shear strength of the work material. However, the analytical model is quite straightforward, since it only requires the values of chip thickness and undeformed chip thickness to estimate the tool–chip contact length.