30 August 2017 in Scientific Reports
The memristor is a promising candidate for the next generation non-volatile memory, especially based on HfO2−x, given its compatibility with advanced CMOS technologies. Although various resistive transitions were reported independently, customized binary and multi-level memristors in unified HfO2−xmaterial have not been studied. Here we report Pt/HfO2−x/Ti memristors with double memristive modes, forming-free and low operation voltage, which were tuned by oxidation conditions of HfO2−xfilms. As O/Hf ratios of HfO2−xfilms increase, the forming voltages, SET voltages, and Roff/Ronwindows increase regularly while their resistive transitions undergo from gradually to sharply inI/Vsweep. Two memristors with typical resistive transitions were studied to customize binary and multi-level memristive modes, respectively. For binary mode, high-speed switching with 103pulses (10 ns) and retention test at 85 °C (>104s) were achieved. For multi-level mode, the 12-levels stable resistance states were confirmed by ongoing multi-window switching (ranging from 10 ns to 1 μs and completing 10 cycles of each pulse). Our customized binary and multi-level HfO2−x-based memristors show high-speed switching, multi-level storage and excellent stability, which can be separately applied to logic computing and neuromorphic computing, further suitable for in-memory computing chip when deposition atmosphere may be fine-tuned.
25 October 2022 in Advanced Electronic Materials
The wake‐up phenomenon widely exists in hafnia‐based ferroelectric capacitors, which causes device parameter variation over time. Crystallization at a higher temperature has been reported to be effective in eliminating wake‐up, but high temperature may yield the monoclinic phase or generate more oxygen vacancies. In this work, a unidirectional annealing method is proposed for the crystallization of Hf0.5Zr0.5O2 (HZO) superlattice ferroelectrics, which involves heating from the Pt/ZrO2 interface side. It is demonstrated that 600 °C annealing only leads to a moderate content of monoclinic phase in HZO, and the TiN/HZO/Pt capacitor exhibits wake‐up free nature and a switchable remnant polarization value of 27.4 µC cm−2. On the other hand, heating from the TiN/HfO2 side, or using 500 °C annealing temperature, could yield ferroelectric devices that require a wake‐up process. The special configuration of Pt/ZrO2 is verified by comparative studies with several other superlattice structures and HZO solid‐state solutions. It is discovered that heating from the Pt/HfO2 side at 600 °C leads to high leakage current and a memristor behavior. The mechanisms of ferroelectric phase stabilization and memristor formation have been discussed. The unidirectional heating method can also be useful for other hafnia‐based ferroelectric devices.
29 October 2018 in Applied Physics Letters
We compared the resistive switching performances of built-in graded oxygen concentration TaOx films and uniform TaOx films under the 100 μA compliance current. The device with a graded oxygen concentration demonstrates increased low resistance and high resistance states, as well as improved stability without the need of higher switching voltages. Using the pulse mode, the switching voltages were confirmed to be less than 1.0 V for the pulse widths of 100 ns and 50 ns and less than 3.3 V for that of 10 ns, showing great advantages over previous reports. The remarkably high performances are due to the built-in oxygen concentration gradient, which results in an electric-field gradient and temperature along conduction paths, confining the rupture/reformation of the random conductive filaments to the customized highest oxygen concentration zone.
11 October 2021 in Applied Physics Letters
HfOx memristor is one of the most promising candidates for nonvolatile memory and neuromorphic computing applications, but for the latter, its gradual conduction modulation and switching linearity still need improvement. In this work, uniform and multilevel resistance switching (RS) of HfOx memristors have been achieved through Mg doping, which is a distinct dopant other than previously used elements like Al and Gd. Moreover, the Mg-doped HfOx memristor exhibits excellent continuous conductance modulation characteristics under pulse voltage. First-principles calculations and conductive mechanism analysis show that Mg can migrate into the conductive filaments (CFs) by adjusting oxygen vacancy migration and defect states in the CFs, resulting in the improved RS performance of HfOx memristors. The reason why Mg doping rather than Ca doping could yield improved RS performances is clarified. Our work shows the unique functionality of Mg dopants in HfOx and provides a feasible way to improve RS performance of transition metal oxide memristors and its guiding principles.
5 November 2024 in Advanced Functional Materials
25 January 2021 in Applied Physics Letters
The fast development of high-accuracy neuromorphic computing requires stable analog memristors. While filamentary memory switching is very common in binary oxides, their resistive switching usually involves abrupt changes due to the rupture or reformation of metallic filaments. In this work, we designed a memristor consisting of dual-layer HfOy/HfOx, with different concentrations of oxygen vacancies (y > x). During the electroforming process, both the migration of existing oxygen vacancies in HfOx and the generation of new oxygen vacancies in HfOy occur simultaneously, leaving a semiconducting part close to the HfOy/HfOx interface. The resulting filament is not metallic as a whole, as revealed by first principles calculations. Such a device demonstrates excellent switching uniformity as well as highly gradual resistance change, ideal for neuromorphic computing. Through fine tuning of the filament structure, the device achieves low variation, high speed, gradual SET and RESET processes, and hundreds of stable multi-level state behaviors. The long-term synaptic plasticity was further achieved, showing good linearity and large analog switching window (ΔG as high as 487.5 μS). This works affords a route toward a gradual resistance change in oxide-based memristors.