X-ray detectors are broadly utilized in medical imaging and product inspection. Halide perovskites recently demonstrate excellent performance for direct X-ray detection. However, ionic migration causes large noise and baseline drift, limiting the detection and imaging performance. Here we largely eliminate the ionic migration in cesium silver bismuth bromide (Cs2AgBiBr6) polycrystalline wafers by introducing bismuth oxybromide (BiOBr) as heteroepitaxial passivation layers. Good lattice match between BiOBr and Cs2AgBiBr6 enables complete defect passivation and suppressed ionic migration. The detector hence achieves outstanding balanced performance with a signal drifting one order of magnitude lower than all previous studies, low noise (1/f noise free), a high sensitivity of 250 µC Gy air−1 cm–2, and a spatial resolution of 4.9 lp mm−1. The wafer area could be easily scaled up by the isostatic-pressing method, together with the heteroepitaxial passivation, strengthens the competitiveness of Cs2AgBiBr6-based X-ray detectors as next-generation X-ray imaging flat panels.
Memory and logic in the same device: Future artificial intelligence applications and data-intensive computations require the development of neuromorphic systems beyond traditional heterogeneous device architectures. Physical separation between a peripheral signal-processing unit and a memory-operating unit is one of the main bottlenecks of heterogeneous architectures, blocking further improvements in efficient resistance matching, energy consumption, and integration compatibility. Tong et al . present a transistor-memory architecture based on a homogeneous tungsten selenide-on-lithium niobate device array (see the Perspective by Rao and Tao). Analog peripheral signal preprocessing and nonvolatile memory were possible within the same device structure, promising diverse neuromorphic functionalities and offering potential improvements in neuromorphic systems on-chip. —YS
The resistive switching effect in memristors typically stems from the formation and rupture of localized conductive filament paths, and HfO2 has been accepted as one of the most promising resistive switching materials. However, the dynamic changes in the resistive switching process, including the composition and structure of conductive filaments, and especially the evolution of conductive filament surroundings, remain controversial in HfO2-based memristors. Here, the conductive filament system in the amorphous HfO2-based memristors with various top electrodes is revealed to be with a quasi-core-shell structure consisting of metallic hexagonal-Hf6O and its crystalline surroundings (monoclinic or tetragonal HfOx). The phase of the HfOx shell varies with the oxygen reservation capability of the top electrode. According to extensive high-resolution transmission electron microscopy observations and ab initio calculations, the phase transition of the conductive filament shell between monoclinic and tetragonal HfO2 is proposed to depend on the comprehensive effects of Joule heat from the conductive filament current and the concentration of oxygen vacancies. The quasi-core-shell conductive filament system with an intrinsic barrier, which prohibits conductive filament oxidation, ensures the extreme scalability of resistive switching memristors. This study renovates the understanding of the conductive filament evolution in HfO2-based memristors and provides potential inspirations to improve oxide memristors for nonvolatile storage-class memory applications.
Atomic-resolution Cs-corrected scanning transmission electron microscopy revealed local shifting of two oxygen positions (OI and OII) within the unit cells of a ferroelectric (Hf0.5Zr0.5)O2 thin film. A reversible transition between the polar Pbc21 and antipolar Pbca phases, where the crystal structures of the 180° domain wall of the Pbc21 phase and the unit cell structure of the Pbca phase were identical, was induced by applying appropriate cycling voltages. The critical field strength that determined whether the film would be woken up or fatigued was ~0.8 MV/cm, above or below which wake-up or fatigue was observed, respectively. Repeated cycling with sufficiently high voltages led to development of the interfacial nonpolar P42/nmc phase, which induced fatigue through the depolarizing field effect. The fatigued film could be rejuvenated by applying a slightly higher voltage, indicating that these transitions were reversible. These mechanisms are radically different from those of conventional ferroelectrics.
The growing demand for scalable solar‐blind image sensors with remarkable photosensitive properties has stimulated the research on more advanced solar‐blind photodetector (SBPD) arrays. In this work, the authors demonstrate ultrahigh‐performance metal‐semiconductor‐metal (MSM) SBPDs based on amorphous (a‐) Ga2O3 via a post‐annealing process. The post‐annealed MSM a‐Ga2O3 SBPDs exhibit superhigh sensitivity of 733 A/W and high response speed of 18 ms, giving a high gain‐bandwidth product over 104 at 5 V. The SBPDs also show ultrahigh photo‐to‐dark current ratio of 3.9 × 107. Additionally, the PDs demonstrate super‐high specific detectivity of 3.9 × 1016 Jones owing to the extremely low noise down to 3.5 fW Hz−1/2, suggesting high signal‐to‐noise ratio. Underlying mechanism for such superior photoelectric properties is revealed by Kelvin probe force microscopy and first principles calculation. Furthermore, for the first time, a large‐scale, high‐uniformity 32 × 32 image sensor array based on the post‐annealed a‐Ga2O3 SBPDs is fabricated. Clear image of target object with high contrast can be obtained thanks to the high sensitivity and uniformity of the array. These results demonstrate the feasibility and practicality of the Ga2O3 PDs for applications in solar‐blind imaging, environmental monitoring, artificial intelligence and machine vision.