31 May 2023 in IEEE Transactions on Geoscience and Remote Sensing
With the improvement in the accuracy of time-domain electromagnetic method (TDEM) observations for geophysical exploration, abnormal diffusion phenomena have become a more salient focus of research. In particular, the induced polarization (IP) effect and magnetic viscosity (MV) effect are often observed in the exploration of polymetallic ore, with IP effect leading to a negative TDEM response, and MV effect generating a power-law decay of -0.6 to 1.4 in the late stage response. Ignoring these effects can lead to incorrect data interpretation. Therefore, to model and analyze both IP effect and MV effect accurately, a three-dimensional (3D) numerical modeling method for induced polarization and magnetic viscosity (IP-MV) effect is proposed. The Cole-Cole conductivity and Cole-Cole susceptibility models are approximated in the time domain using the Multiple-Zero-Pole (MZP) method. Then the diffusion equations for the electric and magnetization intensity fields are derived as control equations, while the 3D modeling of the IP-MV effect with full-waveform is realized based on the improved recursive convolution technique and finite-difference time-domain (FDTD) method. The effectiveness is verified by comparing with the one-dimensional (1D) numerical integration solutions. The response characteristics of IP effect and MV effect are analyzed with full trapezoidal waveform, and a complex model including IP-MV effect is discussed. It is demonstrated that IP-MV effect can be better observed at the on-time stage. The proposed method can effectively model the diffusion process of IP-MV effect with the full-waveform, which can be helpful for improving the inversion accuracy and detection precision for complex geological formations.
10 July 2024 in IEEE Transactions on Antennas and Propagation
With the development of the superconductive quantum interference device-transient electromagnetic (SQUID-TEM) system, stable B-field data with a higher signal-to-noise ratio and a longer time range can be obtained, which provides the possibility for high-precision and large-depth observation. However, due to the magnetic field properties of the magnetic viscosity (MV) effect and remanent magnetization intensity, using the traditional time-domain electromagnetic (TDEM) forward modeling method for simulation and analysis of B-field will introduce errors and cannot accurately depict the diffusion and attenuation characteristics of B-field. Therefore, a direct three-dimensional (3-D) modeling of B-field in TDEM is proposed in the paper. We first introduce the forward modeling method of static magnetic field for the calculation of initial value of B-field. Then, we achieve the iterative calculation of B-field of magnetic media during the transient electromagnetic (TEM) stage by substituting the Cole – Cole susceptibility model into the double-curl B-field diffusion equation of magnetization intensity. The validity of this method is verified using several analytical solutions. 3-D multi-magnetic anomaly models are established, and the characteristics of B-field responses are observed in three dimensions. This method can realize the 3-D modeling of the B-field of the MV effect in TDEM, which is helpful to accurately understand the characteristics of the B-field attenuation curves and can provide a basis for the direct inversion interpretation of B-field data.
23 April 2024 in IEEE Transactions on Industrial Electronics
Superparamagnetic (SPM) effect can produce a −1 ± 0.4 power-law decay of the late-stage responses in the time-domain electromagnetic (TDEM) method. The SPM effect will obscure responses from the anomalous bodies and lead to incorrect data interpretation. Therefore, accurately observing and analyzing the characteristics of SPM effect is particularly important for TDEM data interpretation. To address this problem, we propose a fractional magnetic equivalent circuit model based on the improved particle swarm optimization algorithm and the anomaly loop method, which can effectively generate the SPM effect at the late stage of the attenuation curve. By calculating the magnetic equivalent circuit model responses under the ramp-step waveform, we can analyze the influence of different transmitting and model parameters on the equivalent SPM effect. The magnetic susceptibility can be adjusted by changing the number of turns in the magnetic-induced coil, and the results show that a slower turn-off time is effective at eliminating the influence of SPM effect. Finally, the magnetic equivalent circuits of SPM effect are constructed based on the proposed design method, and the efficacy of the method is verified by field experiments. This article proposes a magnetic equivalent circuit design method to generate SPM effect in the late period of TDEM responses. The method can provide a new avenue for studying the SPM effect and verifying the design and instruments use for the SPM effect observation.
20 November 2024 in IEEE Transactions on Geoscience and Remote Sensing
The induced polarization (IP) and superparamagnetic (SPM) multi-effect fields are generated due to complex physical characteristics and parameter information of polymetallic particles in grounded-wire source time-domain electromagnetic (TDEM) detection. Recent studies show that the accurate observation of IP characteristics and elimination of SPM interference can improve TDEM interpretation accuracy effectively. However, it is difficult to realize the accurate recognition and effective observation of the multi-effect responses in the large range of non-uniform grounded-wire source signals. Therefore, in this study, the three-dimensional (3-D) modeling of IP and SPM effects in grounded-wire source TDEM is realized by introducing the fractional Cole-Cole conductivity and susceptibility models and establishing the double-curl electric field convolution matrices. The response characteristics of IP and SPM effects are analyzed and a three-component observational method of multi-effect is proposed. The effectiveness of the proposed method is verified by carrying out observation experiments of IP and SPM equivalent circuits. The results show that observing the magnetic field component parallel to the grounded-wire source can obtain IP and SPM response characteristics earlier, and observing the vertical component can reduce the interference of SPM effect while obtaining more obvious IP responses. Through the comprehensive analysis of three-component responses, the IP and SPM characteristics can be better determined. This study has a guiding role in receiving the information of multi-effect responses and improving the accuracy of polymetallic ore detection.
25 December 2025 in IEEE Transactions on Instrumentation and Measurement
The superposition of the primary field in time-domain electromagnetic (TDEM) surveys can severely degrade data quality, especially during the early stage after the transmitting current is turned off, resulting in shallow detection blind spots. To address this problem, this paper proposes a cm-level coil–based method for equivalent measurement and removal of the primary field. By driving the cm-level coil with a proportionally reduced current, an equivalent primary field is generated while the induced secondary field remains negligible. The receiving system directly measures this equivalent primary field, enabling its subtraction from the observational data. The method was validated through field experiments using 4 m × 4 m and 50 m × 50 m transmitting coils, where residual primary fields from the bucking device and the complete primary field of the large loop were effectively removed. Consequently, the effective observation window was extended by 150 μs and 278 μs, respectively. The method significantly enhances shallow detection capability and exhibits broad applicability across TDEM system scales.
7 October 2025 in IEEE Transactions on Geoscience and Remote Sensing
The superparamagnetic (SPM) layer in time-domain electromagnetic (TDEM) surveys can induce characteristic –1 power-law decay in late-stage electromagnetic (EM) responses, leading to resistivity interpretation errors. To address this issue, this study used the natural-gradient minimizing-mutual-information independent component analysis (NG-MMI-ICA) algorithm to separate the SPM responses from TDEM data. To avoid the underdetermined blind source separation problem, a synthetic magnetization response was constructed based on the Levenberg–Marquardt (L-M) algorithm. The two input signals were the constructed signal and the measured total response. Then, the non-Gaussianity of the input signals was determined by mutual information and a minimization criterion, and the natural gradient algorithm was applied to maximize this non-Gaussianity, thereby obtaining the separation matrix and separating the SPM responses. To validate the effectiveness of the method, We conducted experimental verification using SPM layered models with different parameters and 3-D complex models. The EM responses obtained after separation showed a decibel error reduction of more than 20 dB compared to those before separation.Finally, based on the SPM equivalent circuit, we acquired field-measured TDEM induction-magnetic viscosity effect and performed separation on the measured data.The results showed that the applied method eliminated the interference of the SPM response,suggesting that the NG-MMI-ICA algorithm can be used to obtain accurate electromagnetic data in TDEM surveys.