Key Lab of Nanodevices and Applications, Suzhou Institute of Nano-Tech and Nano-Bionics, Chinese Academy of Sciences (CAS), Suzhou, Jiangsu Province 215123, P. R. China
Auto-generated profile, based on publicly available information
Yu Zhao
Key Lab of Nanodevices and Applications, Suzhou Institute of Nano-Tech and Nano-Bionics, Chinese Academy of Sciences (CAS), Suzhou, Jiangsu Province 215123, P. R. China
We demonstrate high-performance mid-wavelength p-i-n infrared detectors based on InAs/GaSb type-II superlattices (SLs) grown by a production-scale metalorganic chemical vapor deposition system. Through a specially-designed gas switching sequence and the use of GaAs-type of interfacial layers, strain-balanced SLs with excellent material quality were obtained, as evidenced by atomic force microscopy, photoluminescence, X-ray diffraction, and transmission electron microscopy. The processed devices, with a cutoff wavelength around 4.8 μm, exhibited a R 0 A of 2.3×10 4 Ωcm 2 and a peak responsivity of 1.4 A/W at 77 K. A specific detectivity of 7.2×10 12 cmHz1/2/W was achieved at 3.7 μm. These values are comparable with those reported for InAs/GaSb SL detectors with similar cutoff wavelengths grown by molecular beam epitaxy.
We demonstrate long-wavelength InAs/GaSb superlattice photodiodes grown on InAs substrates in a productionscale metal-organic chemical vapor deposition system. An aluminum-free heterojunction scheme was adopted where midwavelength superlattices served as electron barriers alongside an n-type long-wavelength absorber. Both electrical modeling and experimental characteristics suggest that suppressed dark current and unimpeded transport of photo-generated carriers can be both achieved with engineered barrier layers. Under 77K and a reverse bias of –0.1V, the optimized device has shown a cut-off wavelength around 12µm, a blackbody responsivity of 1.01A/W, a dark-current density of 5 × 10 -4/cm 2 and a dark-current limited specific detectivity over 1 × 10 11 cm · √Hz/W.
20 December 2019 in IEEE Journal of Quantum Electronics
Abstract.We propose and demonstrate a new single heterojunction structure for dual-band detection based on type-II InAs/GaSb superlattices grown by metal-organic chemical vapor deposition. The structure simply consists of a p-type mid-wavelength contact layer, an n-type mid-wavelength absorber and an n-type long-wavelength absorber. At a small reverse bias, the presence of a potential barrier in the valence band between the two adjacent absorbers allows the mid-wavelength channel to work only; at a higher bias where the potential barrier no longer exists, photo-generated holes in the long-wavelength absorber are able to transport through the mid-wavelength absorber and reach the p-contact, making both channels to work. At -0.1 V and 77 K, the mid-wavelength channel exhibited a 50% cut-off wavelength of 3.5 µm, a dark current density of 2.4×10-9 A/cm2, and a peak specific detectivity of 1.4×1013 cm·Hz1/2/W; while at -0.3 V the long-wavelength channel exhibited a 50% cut-off wavelength of 8.0 µm, a dark current density of 5.1×10-7 A/cm2, and a peak specific detectivity of 3.6×1012 cm·Hz1/2/W.
In this paper, a color chart was defined for thin SiC films grown on Si substrates. For SiC films thinner than 500 nm, the surface color was observed using an optical microscope with the incident light normally illuminated on the SiC surface. An image of the surface was then taken by a camera attached to the optical microscope and the surface color was defined using RGB code. For SiC films thicker than 500 nm, the image taken by the camera did not represent the real color of the SiC film. Therefore, for these thicker SiC films, the colors were defined by observing the films under daylight fluorescent lighting by naked eyes. It was found that the colors of the SiC films vary periodically as the thickness increased. No color saturation was found for SiC films up to 1185 nm thick.