1 January 2021 in Transactions of Nonferrous Metals Society of China
5 January 2021 in Chinese Journal of Mechanical Engineering
Large pressure equipment needs to be tested regularly to ensure safe operation; wall-climbing robots can carry the necessary tools to inspect spherical tanks, such as cameras and non-destructive testing equipment. However, a wall-climbing robot inside a spherical tank cannot be accurately positioned owing to the particularity of the spherical tank structure. This paper proposes a passive support and positioning mechanism fixed in a spherical tank to improve the adsorption capacity and positioning accuracy of the inspection robot. The main body of the mechanism was designed as a truss composed of carbon fiber telescopic rods and can work in spherical tanks with diameters of 4.6‒15.7 m. The structural strength, stiffness, and stability of the mechanism are analyzed via force and deformation simulations. By constructing a mathematical model of the support and positioning mechanism, the influence of structural deformation on the supporting capacity is analyzed and calculated. The robot positioning method based on the support and positioning mechanism can effectively locate the robot inside a spherical tank. Experiments verified the support performance and robot positioning accuracy of the mechanism. This research proposes an auxiliary support and positioning mechanism for a detection robot inside a spherical tank, which can effectively improve the positioning accuracy of the robot and meet the robotic inspection requirements.
13 November 2024 in Journal of Autonomous Vehicles and Systems
8 June 2026 in IEEE Robotics and Automation Letters
Continuum robots show great potential in unstructured environments due to their superior safety and compliance compared to traditional articulated robots. However, their applications are limited by low load-bearing capacity and inter-segment actuation coupling. To address these issues, we propose a novel continuum robot featuring a triple-layer tendon system for intra-segment coupling and an inter-segment actuation decoupling structure. The coupling segment consists of serially connected spherical and socket joints with internal tendon channels. Triple-layer tendons pass through these channels, interconnecting the joints to enable synchronized motion from adjacent joints to the entire segment. For inter-segment decoupling, redirection pulleys are incorporated within the first two segments. Driving tendons for distal segments are routed through these pulleys and exit from the base segment to external actuators, ensuring independent motion of each segment. Experimental results demonstrate that the intra-segment coupling significantly enhances stiffness and load capacity. Motion experiments confirm effective spherical joint coupling and accurate bending angle tracking of sinusoidal references. The comprehensive experimental results of the three-segment continuum robot show that the segments have good decoupling performance and the robot possesses high repeatability positioning accuracy.