1 May 2018 in Combustion, Explosion, and Shock Waves
Combustion tests of a ramjet model 1.05 m long and 0.31 m in diameter with an expanding annular combustor operating in the regime of detonation combustion of hydrogen are described. The tests are...
1 August 2011 in Russian Journal of Physical Chemistry B
The possibility of controlled cyclic deflagration-to-detonation transition within a length of 2.5–3.0 m in an open-end tube (94 mm in diameter) with separate continuous supply of natural gas and air w
1 January 2018 in AIP Conference Proceedings
1 January 2025 in Vestnik NovSU
The article presents an analysis of domestic multirotor-type unmanned aerial vehicles used as communication relays. The advantages and disadvantages of each solution are described. The purpose of our work is to explore the rapid deployment of a communication system in a designated area by developing an algorithm for the takeoff and deployment of a UAV swarm. Both manual and automatic modes of quadcopter control are considered. We not only described the sensors used in automatic quadcopter control, bit also examined UAV swarm technology, which makes it possible to provide communication coverage over large areas. The developed algorithm for the takeoff and deployment of a UAV swarm will be applied for the rapid organization of communications in regions of the country where electronic warfare systems are absent. The use of quadcopters as communication relays enables the swift deployment of communication systems in situations where installing relay equipment on fixed supports is impossible due to difficult terrain or unjustified from an economic standpoint. The results of software simulation developed for the deployment of ground base stations, which will be adapted for UAV deployment, are presented.
14 November 2023 in Proceedings of Telecommunication Universities
to increase the efficiency of the trunking communication systems design process, an original algorithm for the automatic placement of base stations is proposed, taking into account the real conditions of radio wave propagation. The analysis showed that the existing methods allow you to place base stations manually, with a given step or automatically, but without taking into account the propagation of radio waves, which leads to poor-quality coverage of the required area with communication. The aim of the work is to reduce the complexity of designing a trunking communication system that is guaranteed to cover a given service area. It is proposed to calculate the service areas of base stations using a statistical model, as well as taking into account additional diffraction losses on the radio signal propagation path. The solution to the problem of automatic placement of base stations is based on the use of the proposed modified Hut model, which takes into account the terrain at the locations of the base and portable stations, as well as on the international recommendation for predicting signal propagation on a specific route for ground services. With automatic placement, the optimality criterion is fulfilled, which consists in placing the minimum number of base stations necessary to cover the required territory. An element of the novelty of the presented solution is that at the first stage of the calculation, the service area of the base station is determined by the statistical method, at the second stage, an updated calculation of the service area takes place taking into account the actual conditions of radio wave propagation at the binding site, and at the third stage, the zone of guaranteed customer service is determined. The use of the proposed algorithm makes it possible to reduce the complexity of the system design process and determine the sufficient number of base stations needed to cover a given area with communication. Appropriate software has been developed to apply the algorithm in real practice. To confirm the effectiveness of the algorithm, the paper presents comparative calculations of the time spent on designing a trunking communication system using the developed software and using the widely used RadioMobile program.
30 December 2025 in Proceedings of Telecommunication Universities
The purpose of the study
is to select and justify the flight and technical characteristics of an unmanned platform for integration with a portable relay station in order to create mobile communication networks.
The relevance
of this task is due to the need for prompt restoration of communication during the elimination of the consequences of emergencies, when the stationary infrastructure is damaged.
The methodology
of the work includes a comparative analysis of the market of electric UAVs by the criteria of load-lifting and flight time, as well as a detailed aerodynamic calculation of the hovering time, taking into account the mass and energy consumption of the payload.
Results.
It has been established that light commercial platforms do not have the necessary load capacity for standard repeaters. It has been shown that heavy agricultural UAVs are capable of carrying repeaters weighing up to 10 kg. Based on the analysis of the obtained non-linear dependence of flight time on load weight, it has been concluded that the miniaturization of repeaters is critical.
The scientific novelty
of the work lies in the development of an algorithmic approach to configuring a mobile relay complex and establishing a quantitative non-linear dependence of the hovering time on the payload mass for heavy agricultural UAVs.
The practical significance
of the results is to substantiate the choice of a specific carrier platform and relay equipment for creating an operational complex suitable for rapid deployment by emergency services and other forces.