E. Anderssen

E. Anderssen

Auto-generated profile, based on publicly available information

E. Anderssen

Lawrence Berkeley National Laboratory, Berkeley, CA, USA

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 February 2023 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
GVG. Vallone
G. Vallone
EAE. Anderssen
E. Anderssen
BBB. Bordini
B. Bordini
PFP. Ferracin
P. Ferracin
Superconducting magnets experience significant thermo-mechanical loads throughout their life cycle. These are introduced by the electro-magnetic forces during powering, but also by the prestress applied in many magnet designs. Further to this, the large thermal excursion that components of different materials experience can generate significant internal forces. The loads are also experienced by the superconducting coils, whose critical current can decrease as a consequence of the applied strain. It is then crucial to predict the overall mechanical behavior and conservatively design a magnet, avoiding failure of the mechanical components and of the superconducting coils. Finite Element Analysis (FEA) is generally used to perform these tasks, but its results rely heavily on the material properties and models used. This is in particular true for the coil composite, which is simplified to allow reasonable model sizes in full magnet models. In this paper, we present the state-of-art knowledge of the mechanical properties of the materials mostly used in superconducting magnet construction. We review elastic and plastic properties at room and cryogenic temperature, thermal contraction, and summarize the state-of-art failure criteria for these materials. Finally, the paper summarizes the present understanding of the mechanical behavior and limits of Nb 3 Sn coils. For the first time, an orthotropic failure criteria is proposed.

8 February 2019 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
GVGiorgio Vallone
Giorgio Vallone
GAGiorgio Ambrosio
Giorgio Ambrosio
EAEric C. Anderssen
Eric C. Anderssen
HBHugues Bajas
Hugues Bajas
NBNicolas Bourcey
Nicolas Bourcey
TSThomas Strauss
Thomas Strauss
The $\rm Nb_3Sn$ MQXF is being developed as a part of the LHC High Luminosity upgrade. The magnet design was tested on 1.5 m long short models, sharing the same cross-section with the full-length magnets. Various azimuthal and longitudinal preloads were applied, studying the impact on the magnet training and on its mechanical performances. The experiments demonstrated the possibility to control the magnet prestress. However, various factors, coil size among the others, may affect the stress variation between and within each winding. This variation could prevent the magnet to reach the desired performances, for example as result of critical current degradation of the $\rm Nb_3Sn$ strands. This paper analyzes the mechanical performances of the short models, studying in particular the stress variation on different coils. The measured coil size was used as input in the numerical simulations, and results were then compared with the strain gauge measurements. Finally, the short models experience was used to evaluate the feasibility of a loading operation that does not rely on the strain measurements.

30 January 2018 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
DCDaniel W. Cheng
Daniel W. Cheng
GAGiorgio Ambrosio
Giorgio Ambrosio
EAEric C. Anderssen
Eric C. Anderssen
NBNicolas Bourcey
Nicolas Bourcey
HFHelene Felice
Helene Felice
GVGiorgio Vallone
Giorgio Vallone
The LHC Accelerator Research Program (LARP), in collaboration with CERN and under the scope of the high luminosity upgrade of the Large Hadron Collider, is in the prototyping stage in the development of a 150 mm aperture high-field Nb$_{3}$Sn quadrupole magnet called MQXF. This magnet is mechanically supported using a shell-based support structure, which has been extensively demonstrated on several R&D models within LARP, as well as in the more recent short (1.2 m magnetic length) MQXF model program. The MQXFA magnets are each 4.2 m magnetic length, and the first mechanical long model, MQXFA1M (using aluminum surrogate coils), and MQXFA1 prototype magnet (the first prototype with Nb$_{3}$Sn coils) have been assembled at LBNL. In this paper, we summarize the tooling and the assembly processes, and discuss the mechanical performance of these first two assemblies, comparing strain gauge data with finite element model analysis, as well as the near-term plans for the long MQXF magnet program.

7 February 2020 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
DCDaniel W. Cheng
Daniel W. Cheng
GAGiorgio Ambrosio
Giorgio Ambrosio
EAEric C. Anderssen
Eric C. Anderssen
PFPaolo Ferracin
Paolo Ferracin
PGPhilippe Grosclaude
Philippe Grosclaude
GVGiorgio Vallone
Giorgio Vallone

10 January 2019 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
GVGiorgio Vallone
Giorgio Vallone
GAGiorgio Ambrosio
Giorgio Ambrosio
EAEric C Anderssen
Eric C Anderssen
NBNicolas Bourcey
Nicolas Bourcey
DCDaniel W. Cheng
Daniel W. Cheng
STStephane Triquet
Stephane Triquet
The Nb $_{3}$ Sn low-β quadrupole MQXF is being developed as a part of the High-Luminosity LHC upgrade project. The magnet will be produced in two different configurations, sharing the same cross-section but with different lengths. A 7.2 m mechanical model of MQXFB was recently assembled at CERN with one copper coil, two low-grade coils and one rejected coil. Coil dimensions were measured with a portable Coordinate Measurement Machine. The coil pack shimming was designed in order to optimize the field quality and the contacts between the coils and the collars. The azimuthal preload target was defined using the short models experience. The mechanical behavior during loading was monitored by means of strain gauges. The results demonstrated that the structure can provide the required prestress to the coils.

7 February 2020 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
HPHeng Pan
Heng Pan
EAEric C. Anderssen
Eric C. Anderssen
GAGiorgio Ambrosio
Giorgio Ambrosio
DCDaniel W. Cheng
Daniel W. Cheng
PFPaolo Ferracin
Paolo Ferracin
GVGiorgio Vallone
Giorgio Vallone
The High-Luminosity LHC Accelerator Upgrade Project (HL-LHC AUP) is approaching the production phase of the US-contributed Q1 and Q3 Interaction Region Quadrupoles (MQXFA). The structures for the MQXFA prototypes were designed and inspected by the US-LARP (LHC Accelerator Research Program), AUP developed criteria, which will be used for the pre-series structures. The first two full-length prototypes with 4.2 m magnetic length, MQXFAP1 and MQXFAP2, were designed and assembled at Lawrence Berkeley National Laboratory (LBNL), and tested at Brookhaven National Laboratory (BNL). The end aluminum short shell of MQXFAP2 was fractured along the shell length during the test, and tests were stopped. Analytical and Finite Element analysis were performed in light of the graded procedure defined in the Structural Design Criteria to investigate the fracture failure for MQXFAP2. In this paper, we report the fracture analysis of the current shell design, including the elasto-plastic simulations with sub-model technique, and calculations with Linear Elastic Fracture Mechanics (LEFM). Test material properties are also presented. The results of this analysis explain why the end shell of MQXFAP2 failed, and suggest fillets on the end shell notches to meet the margin specified in the Structural Design Criteria.