Yu Wang

Yu Wang

Auto-generated profile, based on publicly available information

Yu Wang

College of Physics, Jilin University 1 , Changchun 130012, China

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
5 September 2022 in Applied Physics Letters
Verified
Journal Article
Closed access
PDF file
RZRenzhou Zheng
Renzhou Zheng
JLJing-Bin Lu
Jing-Bin Lu
YWYu Wang
Yu Wang
ZCZiyi Chen
Ziyi Chen
XZXue Zhang
Xue Zhang
YLYumin Liu
Yumin Liu
Wide-bandgap semiconductors are more advantageous for betavoltaic batteries due to their high conversion efficiency and strong radiation resistance. However, there has been little comprehensive analysis of how wide-bandgap semiconductors lead to efficiency improvements. In this work, we proposed a simulation model to predict the output performance of betavoltaic batteries based on 4H-SiC, hexagonal-GaN, and diamond, in which the Monte Carlo code and COMSOL Multiphysics software were combined. The energy deposition of a 63Ni source in semiconductors and the electrical characteristics of p–n junctions were investigated and compared. Our simulation results showed that the mass density and atomic number of semiconductor materials will cause the difference in energy deposition distribution, further leading to the different electron–hole pair generation rates. Then, the internal efficiency of batteries is co-determined by the energy band structure, depletion region width, built-in potential barrier, and minority carrier lifetime. The batteries based on wide-bandgap semiconductors can achieve the larger open-circuit voltage, further leading to higher efficiency. Additionally, to optimize the energy converter structure, the output parameters were calculated with a variation of doping concentrations and thicknesses of each region. Under the irradiation of a 63Ni source, the diamond-based battery with a p–n junction structure has the highest internal efficiency of 31.3%, while the GaN-based battery has the lowest one (16.8%), which can be attributed to the larger carrier recombination rate.

22 August 2022 in Applied Physics Letters
Verified
Journal Article
Closed access
PDF file
YWYu Wang
Yu Wang
RZRenzhou Zheng
Renzhou Zheng
JLJing-Bin Lu
Jing-Bin Lu
XLXiaoyi Li
Xiaoyi Li
ZCZiyi Chen
Ziyi Chen
YLYumin Liu
Yumin Liu
For the 63NiO-Si heterojunction betavoltaic nuclear battery, the energy deposition of the energy conversion material itself was simulated by Monte Carlo simulation, and the structure of the 63NiO-Si heterojunction was optimized based on the theoretical calculation results. When the thickness of 63NiO is 4 μm and the doping concentration of Si is 1 × 1015 cm−3, the short-circuit current density, open-circuit voltage, fill factor, and maximum output power density of the nuclear battery are 1.22 μA · cm−2, 3.17 V, 0.95, 3.67 μW · cm−2. In addition, the output performance of 63Ni/NiO-Si heterojunction betavoltaic nuclear cell was calculated in this study. Under the condition that the activity of the radioactive source and the thickness of NiO(63NiO) are the same in the two structures, the proposed structure (63NiO-Si) has greatly improved the output performance of the nuclear battery by reducing the energy lost from radioactive source self-absorption.

1 October 2021 in AIP Advances
Verified
Journal Article
Open access
PDF file
RZRenzhou Zheng
Renzhou Zheng
YWYu Wang
Yu Wang
JLJing-Bin Lu
Jing-Bin Lu
XLXiaoyi Li
Xiaoyi Li
ZCZiyi Chen
Ziyi Chen
YLYumin Liu
Yumin Liu
This paper presents a simulation model to predict the performance of GaAs-based betavoltaic batteries with a p–n junction structure, in which the carrier transport and collection characteristics were studied. First, the electron–hole pair generation rate in the GaAs material under the irradiation of a 63Ni source was calculated using the Monte Carlo codes. Furthermore, by simulating the energy band structure, electric field distribution, and current density distribution in batteries with the finite element analysis software COMSOL Multiphysics, we analyzed the effects of structure parameters on the output performance. Our simulation results showed that the short-circuit current density (Jsc), open-circuit voltage (Voc), maximum output power density (Pm), and energy conversion efficiency (η) of the batteries are significantly affected by the thicknesses and doping concentrations of the p-region and n-region (Hp-GaAs, Hn-GaAs, Na, and Nd). The optimized GaAs-based battery with an Hp-GaAs value of 0.1 μm, an Hn-GaAs value of 9.9 μm, an Na value of 3.98 × 1016 cm−3, and an Nd value of 1 × 1015 cm−3 can achieve a Pm value of 0.080 μW/cm2. The related Jsc, Voc, and η values are 0.234 μA/cm2, 0.49 V, and 1.55%, respectively. When the top and bottom heavily doped layers are introduced, the Pm value of the battery is enhanced by 7.5% compared to that of the battery without heavily doped layers due to the formed drift fields.

16 February 2022 in Journal of Physics D: Applied Physics
Verified
Journal Article
Closed access
RZRenzhou Zheng
Renzhou Zheng
JLJing-Bin Lu
Jing-Bin Lu
XLXiaoyi Li
Xiaoyi Li
YWYu Wang
Yu Wang
YLYumin Liu
Yumin Liu
XZXue Zhang
Xue Zhang
This paper presents the calculation model and the optimization design of the GaAs-based betavoltaic batteries with p–n junction and Schottky barrier structures. First of all, by using the Monte Carlo code, the transport process and energy deposition distribution of the 63 Ni source beta particles in the GaAs material are simulated. The relationships between the output parameters of batteries and the physical parameters of energy converter such as p–n junction depth, Schottky metal thickness, depletion region width and doping concentrations are discussed through the numerical calculation. For the GaAs p–n junction battery, the maximum output power density of 0.135 μ W cm − 2 can be achieved when the junction depth is x j = 0.05 μ m , the doping concentrations are N a = 10 18 cm − 3 and N d = 2 × 10 15 cm − 3 . Meanwhile, the short-circuit current density, open-circuit voltage, filling factor and energy conversion efficiency are 0.254 μ A cm − 2 , 0.638 V, 83.3% and 2.63%, respectively. Among the selected metals of Au, Pd, Ni and Pt for the GaAs Schottky barrier diodes, the Pt-GaAs battery has the best output performance due to its large work function. The maximum output power density of 0.169 μ W cm − 2 can be achieved when a 20 nm thick Schottky metal Pt is selected and the doping concentration is N d = 10 15 cm − 3 . The associated output parameters of the battery are 0.234 μ A cm − 2 , 0.835 V, 86.5% and 3.29%, respectively.

1 June 2021 in AIP Advances
Verified
Journal Article
Open access
PDF file
YWYu Wang
Yu Wang
JLJingbin Lu
Jingbin Lu
RZRenzhou Zheng
Renzhou Zheng
XLXiaoyi Li
Xiaoyi Li
YLYumin Liu
Yumin Liu
ZCZiyi Chen
Ziyi Chen
In this work, energy converters, which contain a GaP–Si heterojunction and Si-based Schottky barrier diodes with Al, Ti, Ag, and W, are used to convert 2 μm-thick 63Ni radioactive source energy into electrical energy. First, energy deposition distributions of the 63Ni radioactive source in these converters are simulated by using the Monte Carlo method. Then, the electrical output properties of the 63Ni/GaP–Si cell and 63Ni/metal–Si cell are determined through the numerical calculation. For the 63Ni/GaP–Si cell, with the optimized thickness of the GaP layer and doping concentration of Si, the maximum output power density and the conversion efficiency are 0.189 µW cm−2 and 1.83%, respectively. For the Si-based Schottky barrier cells with Al, Ti, Ag, and W, the 63Ni/Al–Si cell has the best electrical output properties with the same thickness of the metal layer and doping concentration of Si. When the thickness of metal Al is 0.1 µm and the doping concentration Na is 1 × 1013 cm−3, the maximum output power density and the conversion efficiency are 0.121 µW cm−2 and 1.18%, respectively. The calculation results indicate that the 63Ni/GaP–Si battery has better electrical output properties than the 63Ni/Al–Si Schottky battery. These results are valuable for fabricating practical batteries.

1 October 2022 in AIP Advances
Verified
Journal Article
Open access
PDF file
XZXue Zhang
Xue Zhang
RZRenzhou Zheng
Renzhou Zheng
YWYu Wang
Yu Wang
JLJing-Bin Lu
Jing-Bin Lu
YZYuehui Zhang
Yuehui Zhang
XXXu Xu
Xu Xu
This paper describes the theoretical calculation and optimization design of the PN junction betavoltaic batteries with 4H–SiC-based energy converter and titanium tritide source. The self-absorption of radioactive isotope sources and the energy deposition distribution in the semiconductor converter are simulated using the Monte Carlo method. The relationship between doping concentrations and basic factors such as minority carrier diffusion lengths and the width of the depletion region are analyzed via the calculation formulas. Then the maximum output power density and energy conversion efficiency are calculated. The optimal thickness of the titanium tritide film is about 0.7 μm, the doping concentrations are 2.5 × 1016 cm−3, and the junction depth of PN junction is 0.1 μm. The surface recombination velocities of electron and hole are 1 × 106 cm/s, respectively. The maximum output power density and energy conversion efficiency are 0.22 μW/cm2 and 2.37%, respectively.