6 December 2016 in Earthquake Engineering & Structural Dynamics
5 May 2023 in Earthquake Engineering & Structural Dynamics
6 August 2018 in Smart Materials and Structures
This study proposes the development of a magnetorheological self-centering brace (MR–SCB) that can improve the energy dissipation capability of SCBs. The proposed brace reduces residual deformation and enhances the seismic performances of the structure. The disc springs enable recentering capability, while the magnetorheological fluid dissipates energy. The mechanics of the MR–SCB are presented, and a restoring force model to describe its hysteretic responses is established. Cyclic tests were conducted on the magnetorheological damping components of the brace and the entire large-scale MR–SCB specimens under sinusoidal excitations. Results confirm that the MR–SCB exhibits full flag-shaped responses, high ultimate bearing capacity, special superior energy dissipation capability, and stable restoring force. In addition, the proposed MR–SCB eliminates 96% of residual deformation. The superior energy dissipation capability of the MR–SCB can dissipate more energy and achieve greater control of seismic responses. The predicted and experimental results agree well. Thus, the Bouc–Wen restoring force model can be used to accurately describe the force–displacement behavior of the MR–SCB.
1 July 2023 in Journal of Structural Engineering
1 February 2023 in Journal of Bridge Engineering
Continuous rigid-frame bridge (CRFB), a type of bridge adopting the unique form of pier-girder consolidation, combines a T-shaped rigid frame with a continuous girder. CRFBs located in western China are likely to suffer destructive earthquakes, which may result in serious damage to bridges. To study the longitudinal seismic responses and damage control of different structure types of the CRFB under strong ground motions, this work develops three nonlinear dynamic analysis models considering the initial internal force state and longitudinal girder-pier pounding effect based on the OpenSEES (version 3.3.0) platform. Moreover, the present study comparatively analyzes the displacement responses, internal force of piers, pounding force and times, and damage condition of the three models and investigates the effectiveness of tuned inerter-based dampers (TIBDs) in controlling seismic responses of the CRFB. The numerical results show that the longitudinal seismic responses of the main piers in the three models are obviously different, especially when subjected to near-fault ground motions. The peak pounding force at the abutments is much larger than at the transition piers, while the pounding times are the opposite. Under near-fault ground motions with a peak ground acceleration (PGA) of 0.4g, the main piers may be damaged moderately or even more seriously, and the bearings are completely destructive. The TIBDs can effectively control the maximum seismic responses and damage degree of the CRFB under pulse-like near-fault ground motions. Among them, both the tuned viscous mass damper and tuned inerter damper are ideal and useful devices. This study can provide useful references for the seismic design and performance analysis of CRFBs.
1 May 2021 in Journal of Structural Engineering
In this work, a new self-centering shear wall with disc spring devices (SCSW-DSD) was developed and experimentally verified. The proposed SCSW-DSD was a combination of a reinforced concrete (RC) wall and two disc spring devices (DSDs), and the DSD comprised both a self-centering device to provide restoring force and a friction energy dissipator to dissipate seismic energy. Two SCSW-DSD specimens with different additional friction forces were designed and fabricated, and four low reversed cyclic loading tests were conducted to investigate the effect of additional friction on the seismic behavior. The results reveal that the SCSW-DSD specimens exhibited stable self-centering and effective energy dissipation during all four tests, and the bearing capacity and energy dissipation increased with the increase of additional friction force. The residual drift ratios of the SCSW-DSD specimens were also reduced by installing the DSDs. In addition, the main parts of the RC wall remained elastic at a drift ratio of 3% after the first loading tests. Although cracks and local concrete crushing occurred at the bottom of the RC wall, these could be repaired, and the earthquake resilience requirements were still met after the second loadings.