Zhong-Xian Li

Zhong-Xian Li

Auto-generated profile, based on publicly available information

Zhong-Xian Li

Tianjin University

Research Focus & Metrics

Academic Career Length

22Years (2005-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 November 2018 in Journal of Structural Engineering
Verified
Journal Article
Closed access
JQJing Qiu
Jing Qiu
Qiuhong ZhaoQiuhong Zhao
Qiuhong Zhao
CYCheng Yu
Cheng Yu
ZLZhongxian Li
Zhongxian Li
Corrugated steel plate shear wall (CoSPSW) is a lateral load–resisting system in which corrugated infill steel wall panels are embedded inside a steel boundary frame. Compared to flat steel plate shear walls (SPSWs), elastic buckling capacity and lateral stiffness could be enhanced considerably, and gravity loads could be avoided when the load is perpendicular to the rib, or resisted when the load is parallel to the rib, which solves the long-lasting problem of flat wall buckling under gravity loads during construction. Cyclic quasi-static tests were conducted on three, 1/3-scale, 2-story, single-bay CoSPSW specimens with different corrugation orientation and configuration. All specimens showed highly ductile behavior and stable cyclic postbuckling performance. Compared to the SPSW specimen, CoSPSW specimens had much higher lateral stiffness and elastic buckling capacity, with less pinching in the hysteric curves. Different from the tension field action mechanism in SPSW, the lateral load–resisting mechanism in CoSPSWs was shear yielding, or inelastic shear buckling, depending on the corrugation configuration. The experimental results and their implication on seismic design are summarized and discussed.

3 March 2017 in The Structural Design of Tall and Special Buildings
Verified
Journal Article
Closed access
PDF file
QZQiuhong Zhao
Qiuhong Zhao
JSJunhao Sun
Junhao Sun
YLYanan Li
Yanan Li
ZLZhongxian Li
Zhongxian Li

1 July 2006 in Journal of Transportation Engineering
Verified
Journal Article
Closed access
ZLZhong-Xian Li
Zhong-Xian Li
XYXiao-Ming Yang
Xiao-Ming Yang
ZLZongjin Li
Zongjin Li
In this paper, the preliminary application of a new type of cement-based piezoelectric sensor developed recently for monitoring the traffic flows is proposed and investigated. The sensor was made by bonding between two cubes of hardened cement sand paste with a commercially available piezoelectric ceramic plate encapsulated by a new sealant developed especially for the sensor’s fabrication, and its property was tested by dynamic loadings including harmonic loading, random loading, and pulse loading. Two experiments were carried out to prove the feasibility and reliability of the sensor for monitoring the traffic flows including the person flow and the vehicle flow in the field of transportation. The tested results show that the sensors can correctly respond to the pulse loadings induced by walking person or passing vehicle and the responses of sensors were approximately direct proportional to the peak values of pulse loadings. A conclusion is given that there is a good potential for the cement-based piezo...

1 December 2019 in Composite Structures
Verified
Journal Article
Closed access
XLXiangwei Liang
Xiangwei Liang
CWChengqing Wu
Chengqing Wu
Yekai YangYekai Yang
Yekai Yang
CWCheng Wu
Cheng Wu
ZLZhongxian Li
Zhongxian Li

3 April 2012 in Structural Control and Health Monitoring
Verified
Journal Article
Closed access
PDF file
CBChunxiao Bao
Chunxiao Bao
HHHong Hao
Hong Hao
ZLZhongxian Li
Zhongxian Li
The world economy is heavily dependent upon an extensive network of pipelines for energy sources transmission. Because the consequence of pipeline failure could be disastrous both economically and environmentally, it is imperative to maintain pipeline integrity and reliability. An integrated autoregressive moving average (ARMA) model algorithm is developed in this study for the structural health monitoring (SHM) of offshore pipelines. In this method, a signal pre-processing module is integrated to remove the influence of loading conditions and noise on structural response. Auto-correlation function of the pre-processed signal is utilized as a substitute of analysis input to overcome noise effect and bias in ARMA model fitting. PAF method is employed for establishing optimal ARMA model, which autoregressive model parameters are extracted as feature vector. A damage indicator based on Mahalanobis distance is defined for damage detection and localization. To demonstrate the reliability of the method in detecting conditions of subsea pipelines, both numerical simulations of pipeline vibrations under ambient marine environment and laboratory tests of a scaled pipeline model in a large wave tank are carried out. The numerically simulated and the measured vibration data in wave tank tests are analyzed using the proposed method in this study to detect pipeline conditions. The results demonstrate that the proposed approach is robust and very sensitive to subsea pipeline damage. It provides accurate identification of damage existence and damage locations in offshore pipeline system. The proposed approach can be used for online SHM of offshore pipeline structures, as well as other civil structures. Copyright © 2012 John Wiley & Sons, Ltd.

29 October 2008 in Transactions of Tianjin University
Verified
Journal Article
Closed access
PDF file
YSYanchao Shi
Yanchao Shi
ZLZhongxian Li
Zhongxian Li
HHHong Hao
Hong Hao