11 December 2017 in Chemistry of Materials
In this work, a systematic study of the effect of electron dose rate, solute concentration, imaging mode (broad beam vs scanning probe mode), and liquid cell setup (static vs flow mode) on the growth mechanism and the ultimate morphology of Au nanoparticles (NPs) was performed in chloroauric acid (HAuCl4) aqueous solutions using in situ liquid-cell TEM (LC-TEM). It was found that a diffusion limited growth dominates at high dose rates, especially for the solution with the lowest concentration (1 mM), resulting in formation of dendritic NPs. Growth of 2D Au plates driven by a reaction limited mechanism was only observed at low dose rates for the 1 mM solution. For the 5 mM and 20 mM solutions, reaction limited growth can still be induced at higher dose rates, due to abundance of the precursor available in the solutions, leading to formation of 2D plates or 3D faceted NPs. As a proof-of-concept, an Au nanostructure with a 3D faceted particle core and a dendritic shell can be in situ produced by simply tuning the electron dose in the 1 mM solution irradiated in a flow cell setup in the STEM mode. This work paves the way to study the growth of complex heteronanostructures composed of multiple elements in LC-TEM.
22 January 2018 in ACS Omega
Biofilms causing medical conditions or interfering with technical applications can prove undesirably resistant to silver nanoparticle (AgNP)-based antimicrobial treatment, whereas beneficial biofilms may be adversely affected by the released silver nanoparticles. Isolated biofilm matrices can induce reduction of silver ions and stabilization of the formed nanosilver, thus altering the exposure conditions. We thus study the reduction of silver nitrate solution in model experiments under chemically defined conditions as well as in stream biofilms. Formed silver nanoparticles are characterized by state-of-the art methods. We find that isolated biopolymer fractions of biofilm organic matrix are capable of reducing ionic Ag, whereas other isolated fractions are not, meaning that biopolymer fractions contain both reducing agent and nucleation seed sites. In all of the investigated systems, we find that silver nanoparticle–biopolymer interface is dominated by carboxylate functional groups. This suggests that the mechanism of nanoparticle formation is of general nature. Moreover, we find that glucose concentration within the biofilm organic matrix correlates strongly with the nanoparticle formation rate. We propose a simple mechanistic explanation based on earlier literature and the experimental findings. The observed generality of the extracellular polymeric substance/AgNP system could be used to improve the understanding of impact of Ag+ on aqueous ecosystems, and consequently, to develop biofilm-specific medicines and bio-inspired water decontaminants.
5 July 2017 in ACS Applied Materials & Interfaces
3 February 2015 in The Journal of Physical Chemistry C
2 July 2014 in Beilstein Journal of Nanotechnology
A thriving field in nanotechnology is to develop synergetic functions of nanomaterials by taking full advantages of unique properties of each component. In this context, combining TiO2 nanocrystals and carbon nanotubes (CNTs) offers enhanced photosensitivity and improved photocatalytic efficiency, which is key to achieving sustainable energy and preventing environmental pollution. Hence, it has aroused a tremendous research interest. This report surveys recent research on the topic of synthesis and characterization of the CNT–TiO2 interface. In particular, atomic layer deposition (ALD) offers a good control of the size, crystallinity and morphology of TiO2 on CNTs. Analytical transmission electron microscopy (TEM) techniques such as electron energy loss spectroscopy (EELS) in scanning transmission mode provides structural, chemical and electronic information with an unprecedented spatial resolution and increasingly superior energy resolution, and hence is a necessary tool to characterize the CNT–TiO2 interface, as well as other technologically relevant CNT–metal/metal oxide material systems.
3 March 2017 in Chemistry of Materials
Controlled synthesis of a hybrid nanomaterial based on titanium oxide and single-layer graphene (SLG) using atomic layer deposition (ALD) is reported here. The morphology and crystallinity of the oxide layer on SLG can be tuned mainly with the deposition temperature, achieving either a uniform amorphous layer at 60 °C or ∼2 nm individual nanocrystals on the SLG at 200 °C after only 20 ALD cycles. A continuous and uniform amorphous layer formed on the SLG after 180 cycles at 60 °C can be converted to a polycrystalline layer containing domains of anatase TiO2 after a postdeposition annealing at 400 °C under vacuum. Using aberration-corrected transmission electron microscopy (AC-TEM), characterization of the structure and chemistry was performed on an atomic scale and provided insight into understanding the nucleation and growth. AC-TEM imaging and electron energy loss spectroscopy revealed that rocksalt TiO nanocrystals were occasionally formed at the early stage of nucleation after only 20 ALD cycles. Understanding and controlling nucleation and growth of the hybrid nanomaterial are crucial to achieving novel properties and enhanced performance for a wide range of applications that exploit the synergetic functionalities of the ensemble.