In this paper, an X-band perfect cross-polarization convertor (CPC) that consists of Γ-shaped metal patch imprinted on a metal-backed FR-4 dielectric substrate is designed, analyzed, and characterized. The unit cell dimensions of the developed structure are optimized to achieve more than 99.9% polarization conversion ratio (PCR) for a frequency range of 8–12 GHz (X-band) at normal incidence angle. The performance of device exhibits 80% PCR value as a function of angle of incidence up to 40°. The analytical finding and experimental characteristics of the designed structure agree well with the simulated results. In addition, the developed device has been thoroughly analyzed numerically for radar cross-section (RCS) reduction using phase cancellation techniques which exhibits 10-dB mono-static RCS reduction over a frequency band 7.7 GHz to 13.7 GHz. The developed device is highly suitable for radar stealth applications.
This paper reports the design, development and characterization of a broadband, polarization insensitive metasurface absorber in planar, cylindrically bent and 90° dihedral surface geometry. Four metallic patches loaded with eight lumped resistors are used, which has been optimized numerically using CST MICROWAVE STUDIO, as a unit cell of developed metasurface absorber, to achieve 20 dB reflection reduction for 51.21% fractional bandwidth (13.42–22.66 GHz) under normal incidence with 0.12 $${\lambda }_{L}$$ thickness (where $${\lambda }_{L}$$ corresponds to lower operating frequency). The numerical findings are also verified analytically using equivalent circuit analysis, which exhibits very good agreement. Polarization-insensitive characteristics are achieved using fourfold rotation symmetry of the designed structure. The fabricated prototype of the designed absorber is experimentally characterized, using free space measurement method and ABmm vector network analyzer (VNA) system, and fairly good agreement with numerical-analytical findings are reported. The major novelty of this study is the design and development of a broadband (13.42–22.66 GHz), polarization insensitive metasurface absorber that provides 20 dB reflection reduction numerically as well as experimentally in the whole band, which to the author’s knowledge has not been observed till now. Also, keeping in mind the radar stealth applications, first time we have demonstrated both numerically and experimentally, different geometrical shapes of conformal metasurfaces that can be practically used in actual scenario.
This work reports design, development and characterization of both planar and conformal Metasurfaces using resistive Ink based lossy pattern printed on top of FR-4 dielectric substrate for RADAR stealth application. Different geometrical dimensions of the proposed unit cell have been optimized numerically using CST-Microwave Studio, to achieve 20 dB reflection reduction with 60% fractional bandwidth in frequency range 10.5–19.5 GHz under normal incidence with $0.12\lambda _{\mathrm {L}}$ thickness (where $\lambda _{\mathrm {L}}$ corresponds to lower operating frequency) and 10 dB reflection reduction up to 40° oblique angle of incidence in the given frequency spectrum for both TE and TM polarized wave. An equivalent circuit analytical modelling has also been performed to understand and verify the numerical findings which are nearly in agreement. Polarization insensitive characteristics of developed surfaces is achieved using fourfold rotation symmetry of the designed unit cell. The designed absorbers are fabricated in form of planar, cylindrically bent and 90° dihedral Metasurfaces and are characterized using ABmm Vector Network Analyzer (VNA) system and free space measurement method. A thorough different experimental measurements are performed and it is found that measured characteristics are in agreement with numerical-analytical findings.
7 September 2021 in Waves in Random and Complex Media
This article deals with the design, development and characterization of a broadband, wide incidence angle and polarization-insensitive metasurface, which consists of periodic resistive-ink pattern printed on top of FR-4 dielectric substrate as a RADAR absorber. Geometrical dimensions of the proposed unit cell have been optimized numerically using CST-Microwave Studio to achieve 99% absorptivity for X and Ku frequency spectrum (8–18 GHz) under the normal angle of incidence and to achieve almost 90% absorptivity under the oblique angle of incidence up to 50° within X-Band to Ku-Band spectrum. Furthermore, it is reported that by having fourfold rotation symmetry, the designed structure is insensitive to the polarization of the incident wave. An equivalent circuit analytical modeling has also been performed to understand and verify numerical findings that are nearly in agreement. The designed absorber is fabricated and characterized using ABmm VNA and free space measurement method, for both normal and oblique angle of incidence, and it is found that measured characteristics are in agreement with numerical-analytical findings. Furthermore, the monostatic and bistatic Radar Cross Section reduction capability of the designed absorbing structure for both planar and curved surface (cylinder) is studied extensively to assess its potential application in X-Band to Ku-Band Spectrum.