Surya Kumar Pathak

Surya Kumar Pathak

Auto-generated profile, based on publicly available information

Surya Kumar Pathak

Institute for Plasma Research, Bhat, Gandhinagar 382428, India

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
2 September 2022 in Scientific Reports
Verified
Journal Article
Open access
PDF file
PTPriyanka Tiwari
Priyanka Tiwari
SPSurya Kumar Pathak
Surya Kumar Pathak
VSVarsha Siju
Varsha Siju
This paper reports the design, development and characterization of a broadband, polarization insensitive metasurface absorber in planar, cylindrically bent and 90° dihedral surface geometry. Four metallic patches loaded with eight lumped resistors are used, which has been optimized numerically using CST MICROWAVE STUDIO, as a unit cell of developed metasurface absorber, to achieve 20 dB reflection reduction for 51.21% fractional bandwidth (13.42–22.66 GHz) under normal incidence with 0.12 $${\lambda }_{L}$$ λ L thickness (where $${\lambda }_{L}$$ λ L corresponds to lower operating frequency). The numerical findings are also verified analytically using equivalent circuit analysis, which exhibits very good agreement. Polarization-insensitive characteristics are achieved using fourfold rotation symmetry of the designed structure. The fabricated prototype of the designed absorber is experimentally characterized, using free space measurement method and ABmm vector network analyzer (VNA) system, and fairly good agreement with numerical-analytical findings are reported. The major novelty of this study is the design and development of a broadband (13.42–22.66 GHz), polarization insensitive metasurface absorber that provides 20 dB reflection reduction numerically as well as experimentally in the whole band, which to the author’s knowledge has not been observed till now. Also, keeping in mind the radar stealth applications, first time we have demonstrated both numerically and experimentally, different geometrical shapes of conformal metasurfaces that can be practically used in actual scenario.

20 February 2025 in IEEE Journal on Multiscale and Multiphysics Computational Techniques
Verified
Journal Article
Closed access
PSPraveen Singh
Praveen Singh
SPSoumyashree S. Panda
Soumyashree S. Panda
JDJogesh C. Dash
Jogesh C. Dash
BRBright Riscob
Bright Riscob
SPSurya K. Pathak
Surya K. Pathak
RHRavi. S. Hegde
Ravi. S. Hegde
Antenna synthesis is becoming increasingly challenging with tight requirements for C-SWAP (cost, size, weight and power) reduction while maintaining stringent electromagnetic performance specifications. While machine learning approaches are increasingly being explored for antenna synthesis, they are still not capable of handling large shape sets with diverse responses. We propose a branched deep convolutional neural network architecture that can serve as a drop-in replacement for a full-wave simulator (it can predict the full spectral response of reflection co-efficient, input impedance and radiation pattern). We show the utility of such models in surrogate-assisted evolutionary optimization for antenna synthesis with arbitrary specification of targeted response. Specifically, we consider the large shape set defined by the set of 16-vertexes polygonal patch antennas and consider antenna synthesis by specifying independent constraints on return loss, radiation pattern and gain. In contrast to online surrogates, our approach is an offline surrogate that is objective-agnostic; trained once, it can be used over multiple optimizations whereby the model training costs become amortized across multiple synthesis requests. Our approach outperforms evolutionary optimizations relying on full-wave solver-based fitness estimation. Specifically, we report the design, fabrication and experimental characterization of three polygon -shaped patch antennas, each fulfilling different objectives (narrow band, dual-band & wide-band). The reported methodology enables rapid synthesis (in seconds), produces verifiable sound designs and is promising for furthering data-driven design methodologies for electromagnetic wave device synthesis.

8 June 2022 in IEEE Access
Verified
Journal Article
Open access
PTPriyanka Tiwari
Priyanka Tiwari
SPSurya Kumar Pathak
Surya Kumar Pathak
VSVarsha Siju
Varsha Siju
This work reports design, development and characterization of both planar and conformal Metasurfaces using resistive Ink based lossy pattern printed on top of FR-4 dielectric substrate for RADAR stealth application. Different geometrical dimensions of the proposed unit cell have been optimized numerically using CST-Microwave Studio, to achieve 20 dB reflection reduction with 60% fractional bandwidth in frequency range 10.5–19.5 GHz under normal incidence with $0.12\lambda _{\mathrm {L}}$ thickness (where $\lambda _{\mathrm {L}}$ corresponds to lower operating frequency) and 10 dB reflection reduction up to 40° oblique angle of incidence in the given frequency spectrum for both TE and TM polarized wave. An equivalent circuit analytical modelling has also been performed to understand and verify the numerical findings which are nearly in agreement. Polarization insensitive characteristics of developed surfaces is achieved using fourfold rotation symmetry of the designed unit cell. The designed absorbers are fabricated in form of planar, cylindrically bent and 90° dihedral Metasurfaces and are characterized using ABmm Vector Network Analyzer (VNA) system and free space measurement method. A thorough different experimental measurements are performed and it is found that measured characteristics are in agreement with numerical-analytical findings.

26 May 2021 in IEEE Transactions on Plasma Science
Verified
Journal Article
Closed access
KPKiran Patel
Kiran Patel
UNUmesh Nagora
Umesh Nagora
HJHem Joshi
Hem Joshi
SPSurya Pathak
Surya Pathak
KJKumarpalsinh A. Jadeja
Kumarpalsinh A. Jadeja
RTRakesh L. Tanna
Rakesh L. Tanna
Microwave interferometry has been used extensively for plasma diagnostics in tokamak for real-time electron density measurements. Real-time density measurement is an indispensable part of advanced tokamaks, as it can be used as feedback to control the plasma operation. In this article, we report the development of the phase extraction method in a heterodyne interferometer for real-time density estimation using a field-programmable gate array (FPGA). FPGA provides parallel processing, minimum control delay, more efficient processing architecture, and jitter-free synchronization between different control layers. Digital CORDIC algorithm is used for the estimation of the phase between two arms of the interferometer. A LabVIEW program is developed for the FPGA target and host controller to acquire the data and estimate electron density in real time, which can be used for feedback purpose by regulating the amount of gas injection using piezoelectric valve that requires a high voltage (~100 V) for about 1 ms. The delay in generating the feedback signal is proportional to the sampling speed (100 kHz) of the analog signal. In this work, line-averaged electron density measurement using digital signal processing (DSP) and LabVIEW-FPGA technology is presented. The developed interferometer and data acquisition (DAQ) system installed on ADITYA-U tokamak can measure the electron density in the range of 1 x 10¹⁸-1 x 10²⁰ m⁻³. The algorithm used for the estimation of phase difference is validated using a conventional arctan method. The developed reconfigurable FPGA-based DAQ system uses low power, has a reconfigurable hardware structure for fast real-time signal processing, and can be easily upgraded.

10 May 2021 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
GGGibin Chacko George
Gibin Chacko George
JBJ. J. U. Buch
J. J. U. Buch
APA. Amalin Prince
A. Amalin Prince
SPSurya K. Pathak
Surya K. Pathak
This article discusses the design and development of a compact frequency modulated continuous wave (FMCW) Reflectometry diagnostic instrument. The existing setup is rigid and bulky utilizing precious Tokamak lab space, lack of remote configurability option, and requires manual intervention to change control parameters. Hence, we propose a system-on-chip ( SoC )-based automated reflectometry diagnostic instrument (ARDI) to implement all the four major electronic components into a single instrument. Wherein, the analog driver is designed to generate a non-linear sweep voltage of 0-20 V in order to drive the ultrawideband voltage controlled oscillator ( VCO ). The data acquisition system (DAQ) is deployed to acquire the in-phase (I) and quadrature (Q) components of a signal at 245 mega samples per second (MSPS) with 14-bit resolution. The trigger unit operating in pattern mode at 100 MHz is responsible to trigger all the units synchronously. The data processing unit, normalizes the signal using the proposed hardware accelerator clocked at 200 MHz. The proposed normalization technique is analyzed and compared with envelope-based normalization technique. This study conveys that the proposed technique utilizes lesser hardware resources with the availability of both I and Q components, making it computationally simpler and faster. The designed ARDI can be configured and monitored remotely by developing a graphical user interface ( GUI ).

25 September 2019 in Circuits, Systems, and Signal Processing
Verified
Journal Article
Closed access
PDF file
GGGibin Chacko George
Gibin Chacko George
AMAbhishek Moitra
Abhishek Moitra
SCSriyash Caculo
Sriyash Caculo
APA. Amalin Prince
A. Amalin Prince
JBJ. J. U. Buch
J. J. U. Buch
SPSurya K. Pathak
Surya K. Pathak