14 January 2010 in Optics Letters
We describe a zonal-wavefront-sensing technique using an array of plane diffraction gratings. A spatially coherent beam, whose wavefront is to be measured, is incident on the array of gratings. The direction of a diffracted beam of a certain diffraction order is a function of the orientation and periodicity of the corresponding grating. Thus, by choosing the orientation and periodicity of each grating appropriately and by having a lens immediately behind the grating array, it is possible to get an array of focal spots. The profile of the incident wavefront can be estimated from the displacements of these focal spots relative to those due to an unaberrated beam. The arrangement makes it possible to increase the separation between two adjacent focal spots corresponding to two nearby gratings without effecting the areas of the gratings. Consequently, a relatively large dynamic range in wavefront measurement can be achieved without compromising the accuracy. With the arrangement it is also possible to use a photodetector array whose outline is independent of the grating array outline. The proposed wavefront-sensing technique is implemented experimentally using a liquid-crystal spatial-light modulator in conjunction with a CCD camera, and the obtained results are presented.
26 May 2016 in Journal of Optics
In this paper, we introduce an arbitrary vector-beam-forming scheme using a simple arrangement involving only one liquid crystal spatial light modulator. An arbitrary vector beam can be obtained by overlapping two orthogonally polarized beams. In most of the existing vector-beam-forming schemes the two orthogonally polarized beams are essentially copies of a single incident wavefront. However, in the proposed scheme the two orthogonally polarized beams correspond to two separated parts of a single incident wavefront. Taking a cue from the two-beam interference phenomenon, the present scheme can be referred to as a division of a wavefront-based scheme. The proposed setup offers certain important advantages and is more suitable for the generation of higher average-power vector beams. We demonstrate the working of the vector-beam-forming scheme by generating various vector beams such as radially polarized, azimuthally polarized, and Bessel–Gauss beams and also a boat-shaped beam in the focal volume of a low-numerical-aperture focusing lens. The boat-shaped beam comprises a dark center surrounded by intense light from all but one direction. The beam is realized at the focus of an azimuthally polarized beam in the presence of a moderate amount of coma in the beam. The experimental results obtained using the proposed setup are verified by comparing them with the theoretical results.
6 November 2020 in Communications Physics
Free-space optical communication systems exploit the properties of light beams to transfer information through a free-space link. Indeed such systems provide an exciting alternative for communication. Here we introduce information transfer through free-space using a laser beam having its phase encoded with multiple orthogonal aberration modes. We use Zernike polynomials, which form a complete basis set, to represent the aberration modes. The user information is converted to co-efficients of the Zernike modes which are summed digitally to obtain the resultant phase profile. A single phase modulating device then reads the resultant phase to shape the wavefront of the beam to be transmitted. The receiving station estimates the co-efficients of all modes in the beam from a single measurement of a wavefront sensor, to retrieve the user information. We demonstrate data transfer using multiple modes, each with multiple strengths, and external perturbation compensation using the completeness property of the modes.
12 April 2019 in Journal of the Optical Society of America A
The modal wavefront sensor provides a direct and less computationally intensive way, relative to a zonal wavefront sensor, of estimating the various aberration modes present in a beam of light. Such wavefront sensors are particularly useful when the optical system concerned is affected by a limited number of aberration modes. Unfortunately, the basic design of the modal wavefront sensor suffers from reduced linear response and intermodal crosstalk. As a result of the reduced linear response, the magnitude of an aberration mode estimated by a modal wavefront sensor may differ from the actual strength of the aberration mode. This difference is even more if other aberration modes, in addition to the aberration mode to be detected, also referred to as the sensor mode, are present in the beam. In this paper we propose a modal wavefront sensing scheme where the sensor output has a significantly enhanced linear response. The proposed scheme also provides superior intermodal crosstalk immunity, especially for a few selected aberration modes. We first show theoretically how by incorporating a variable magnitude of the sensor mode into the beam the precise strength of the same mode can be estimated. Results from numerical simulation and an experiment using a proof of principle setup demonstrate the improved performance by the proposed scheme.
19 October 2022 in Optics Letters
Here we introduce an in situ and non-intrusive surface and thickness profile monitoring scheme of thin-film growth during deposition. The scheme is implemented using a programmable grating array based zonal wavefront sensor integrated with a thin-film deposition unit. It provides both 2D surface and thickness profiles of any reflecting thin film during deposition without requiring the properties of the thin-film material. The proposed scheme comprises a mechanism to nullify the effect of vibrations which is normally built in with the vacuum pumps of thin-film deposition systems and is largely immune to the fluctuations in the probe beam intensity. The final thickness profile obtained is compared with independent off-line measurement and the two results are observed to be in agreement.
15 June 2011 in Optics Letters
We describe a technique for a phase-stepping interferometer based on programmable binary phase holograms, particularly useful for optical testing of aspheric or free-form surfaces. It is well-known that binary holograms can be used to generate reference surfaces for interferometry, but a major problem is that cross talk from higher diffraction orders and aliasing can reduce the fidelity of the system. Here, we propose a new encoding technique which improves the accuracy of the technique and demonstrate its implementation using a binary liquid crystal spatial light modulator.