2 April 2024 in Measurement
12 May 2022 in Optics and Lasers in Engineering
5 September 2024 in IEEE Transactions on Circuits and Systems for Video Technology
Partial point cloud registration is an essential and fundamental component of generating complete 3D shapes, aiming at converting partial scans into a unified coordinate system. However, existing point cloud registration methods suffer from inadequately rich local feature extraction and feature interaction. In addition, these methods still face challenges in modeling the global contextual information of point clouds sufficiently, which limits the improvement in registration effectiveness, especially for partial-to-partial point cloud registration with high noise. To overcome these issues, this paper proposes an enhanced PointNet and assignable weights transformer network (LFA-Net) for partial point cloud registration. The model achieves coarse-to-fine point cloud registration through three core modules. First, the Sufficient Local Feature Extraction Module (LFM) is constructed to extract various local feature information. Then, the Adequate Feature Aggregation Module (FAM) is designed to integrate the feature information from different point clouds. Finally, the Assignable Weights Transformer Module (ATM) is presented to stimulate the model’s global modeling ability during the registration process, enabling the selection of representative points for optimal point cloud registration. Extensive experiments conducted on ModelNet40 using partially overlapping point clouds illustrate the superior registration performance of LFA-Net compared with other state-of-the-art methods. Moreover, Numerous experiments on synthetic and real-word datasets further indicate that LFA-Net also has significant advantages in registering partial point clouds with noise and unseen categories, which demonstrates its excellent robustness and generalization ability for real-world practical application.
26 June 2023 in Optics Express
The crosstalk coefficient calibration of de-crosstalk in color fringe projection profilometry is an essential step for the high-accuracy measurement. In this paper, a novel approach for calibrating crosstalk matrix of color camera is proposed. The wrapped phase error model introduced by color crosstalk in orthogonal pattern is established. Compared with the existing calibration methods depending on calculating the modulation of the crosstalk channel, the crosstalk coefficients are obtained from phase error in our method. By projecting the designed color orthogonal phase-shifting fringe patterns onto a white plate, the phase-shifting fringe patterns in both horizontal and vertical directions can be separated from captured images. The coefficients between different channels are calibrated by fitting the error relationship between the wrapped phase containing crosstalk and the standard ones. Coefficient fitting simulations and experimental validations including shape measurement of a white plate and distance measurement of a step block are carried out to verify the effectiveness of the proposed method.
22 September 2023 in Journal of Lightwave Technology
We propose a technique to achieve high-speed and high-precision distance measurement via phase demodulation of broadband optical carrier-based microwave interferometry (OCMI). An in-phase and quadrature (I/Q) processing scheme is designed and incorporated to measure the phase shift induced by target distance. The results could be efficiently derived from a minimum of one pair of detected outputs with immunity to power fluctuations. To extend the non-ambiguous measurement range while maintaining high resolution, a multifrequency-based phase unwrapping procedure is implemented. In the meantime, a driving module is utilized to effectively amplify and stabilize the signal. Experiments were carried out to evaluate the feasibility and performance of the proposed OCMI distance measurement method, which exhibits good accuracy, stability, and reliability. The maximum residual error is found to be 0.084 mm and the relative error is less than 2 × 10 −4 . Moreover, the method is capable to perform thousands of measurements within a few seconds, thus the OCMI-based dynamic target tracking has been achieved.
28 June 2023 in Measurement Science and Technology
Digital fringe projection (DFP) is widely applied in three-dimensional (3D) shape measurements. However, its performance is severely disturbed while measuring complex surfaces with an extensive range of reflectivity. In this paper, to enhance the underexposed regions and reduce the saturated regions, an automatic and effective method is proposed for the multi-exposure determination of the DFP system. During the whole process, only one unsaturated image must be captured preliminarily, which could establish an adaptive strategy based on the intensity value distribution function. Raw absolute phase maps captured with different exposure times are synthesized at the pixel level for phase retrieval and 3D reconstruction. To evaluate the effectiveness of our method, a high dynamic range method and a global optimal exposure method are introduced for comparison. Verification experiments demonstrate that our method performs better for the 3D reconstruction results of complex surfaces with a large reflectivity range.