24 November 2025 in IEEE/ASME Transactions on Mechatronics
Robotic actuators face a performance gap between low-ratio quasi-direct drive (QDD) systems and conventional harmonic drives, which are typically limited to ratios above 30:1. This article presents a tri-contacted plate harmonic reducer (Tri-c PHR) that addresses this challenge by combining axial elastic deformation with a three-point tooth engagement system. The proposed design achieves a 16:1 reduction ratio—a range where conventional harmonic gears face significant design challenges—while maintaining high efficiency and low backlash. An initial prototype validates the design’s feasibility, demonstrating competitive positioning accuracy and backdrivability comparable to commercial harmonic reducers, despite operating at a significantly lower reduction ratio. The Tri-c PHR offers a compelling solution for applications requiring both torque transparency and moderate reduction ratios.
13 April 2026 in IEEE Access
Despite rapid advancements in robotics, teleoperation remains indispensable for precise tasks that have not yet been fully automated. To this end, this paper presents the design, analysis, and experimental validation of the SNU-Avatar Haptic Arm, a high-performance haptic interface developed for immersive teleoperation. To balance payload capacity and backdrivability, the system employs a hybrid actuation architecture combining quasi-direct drive and direct drive mechanisms. This configuration reduces mechanical impedance and friction while ensuring sufficient force output for high-fidelity interaction. The 6-degrees-of-freedom kinematic structure is designed to encompass the natural workspace of the human upper limb, and finite element analysis confirms that the structural natural frequency is sufficiently high to secure a stable control bandwidth. A comprehensive evaluation validates the system’s performance, focusing on force rendering accuracy. The practical utility of the proposed interface was demonstrated in the ANA Avatar XPRIZE Finals through integration with a humanoid robot. The system successfully performed complex missions, such as heavy object manipulation, under constraints including communication latency. The results confirm that the proposed design methodology effectively bridges the gap between remote presence and physical reality, ensuring robust manipulation in extreme environments.
27 May 2026 in International Journal of Precision Engineering and Manufacturing
31 August 2026 in Journal of Korea Robotics Society
16 April 2026 in International Journal of Precision Engineering and Manufacturing
Strain wave gears are essential for precision systems requiring high reduction ratios in compact forms, yet conventional cup-type designs face axial length limitations. This study presents a comprehensive mechanical analysis of the Plate Harmonic Reducer (PHR) to address these constraints. We investigated the thickness-performance relationship through analytical modeling based on Kirchhoff-Love plate theory, nonlinear finite element simulations, and experimental validation. The analysis confirmed a cubic dependence of deformation force on thickness, while sensitivity analysis of the contact conditions validated the robustness of the proposed model. Experimental results demonstrated that the ultra-thin configuration (0.4 mm) achieves a transmission efficiency of 68.88 %—comparable to commercial units—while reducing axial thickness by 40.3 % and weight by 27.2 %. Crucially, this improvement presents a quantifiable design trade-off: while thinner plates maximize efficiency, they compromise torsional stiffness (decreasing from 141.03 Nm/rad at 1.2 mm to 62.25 Nm/rad at 0.4 mm). These findings provide validated guidelines for optimizing PHR specifications for space-constrained applications in robotics and portable instrumentation.
28 February 2026 in Journal of Korea Robotics Society