8 February 2023 in IEEE Robotics and Automation Letters
As compliant joints not only compensate for the lack of actuated degrees of freedom of an under-actuated system and improve grasp stability but also prevent system failure from unexpected contacts, various types of compliant joints have been applied to end-effectors. Although joint compliance increases the success rate of power grasping, when the finger wraps around large objects, it can reduce the grasping success rate in pinch gripping when dealing with small objects using the fingertips. To overcome this drawback, we propose a novel rolling contact joint, anthropomorphic rolling contact joint , that mimicked the structures of the human finger joint, tongue-and-groove, and collateral ligaments. The anthropomorphic rolling contact joint can passively adjust the torsional stiffness according to the joint angle without additional weight and space. With the anthropomorphic rolling contact joint, flexing the fingers for pinch grasping increases torsional stiffness of the joints and improves grasping stability. In this study, the characteristics and performance of anthropomorphic rolling contact joints were experimentally analyzed by varying the tongue-and-groove shape. Furthermore, it was demonstrated that the three-finger gripper with high torsional stiffness stably grasps small objects in the pinch grasping posture. In addition, because it is easy to manufacture, an anthropomorphic rolling contact joint has advantages in terms of maintenance.
28 June 2024 in International Journal of Social Robotics
Avatar robots enable the teleoperation and telepresence of an operator with a rich and meaningful sense of existence in another location. Robotic avatar systems rely on intuitive interactions to afford operators comfortable and accurate robot control to perform various tasks. The ability of operators to feel immersed within a robot has drawn interest in multiple research fields to explore the future capabilities of such systems. This paper presents a robotic avatar system based on a custom humanoid robot, TOCABI, with a mobile base. Its teleoperation system was developed in response to the ANA Avatar XPRIZE. Combining the life-size humanoid robot and the mobile base allows for improved mobility and dexterous manipulation. The robotic avatar system comprises the robot/base and an operator station that incorporates haptic feedback devices, trackers, a head-mounted display, gloves, and pedals. These devices connect the robot-environment interaction and operator-avatar robot experience through visual, auditory, tactile, haptic, and kinesthetic feedback. Combining the untethered battery-operated and Wi-Fi-enabled robot with these sensory experiences enables intuitive control through the operator’s body movement. The performance of the robotic avatar system was evaluated through user studies and demonstrated in the ANA Avatar XPRIZE Finals, represented by Team SNU, where it completed 8 of the 10 missions, placing the team eighth among the 17 finalists.
10 June 2023 in Journal of Intelligent & Robotic Systems
1 September 2022 in Journal of Korea Robotics Society
24 November 2025 in IEEE/ASME Transactions on Mechatronics
Robotic actuators face a performance gap between low-ratio quasi-direct drive (QDD) systems and conventional harmonic drives, which are typically limited to ratios above 30:1. This article presents a tri-contacted plate harmonic reducer (Tri-c PHR) that addresses this challenge by combining axial elastic deformation with a three-point tooth engagement system. The proposed design achieves a 16:1 reduction ratio—a range where conventional harmonic gears face significant design challenges—while maintaining high efficiency and low backlash. An initial prototype validates the design’s feasibility, demonstrating competitive positioning accuracy and backdrivability comparable to commercial harmonic reducers, despite operating at a significantly lower reduction ratio. The Tri-c PHR offers a compelling solution for applications requiring both torque transparency and moderate reduction ratios.
5 December 2025 in International Journal of Control, Automation, and Systems