14 April 2021 in IEEE Transactions on Power Electronics
Steady-state operation of dual active bridge (DAB) ac–dc converters can show a high dependence on the circuit nonidealities and on the transient nature of the consistently changing phase-shifts necessary to achieve ac–dc operation. These aspects are not fully captured using traditional modeling approaches derived from dc–dc DAB converter analyses. To address these issues, this article presents a unified modeling approach comprising of hybrid frequency and time-domain analyses that encompass the transient nature of the ac–dc converter while providing the advantages of steady-state frequency-domain analysis. The limitations of conventional modeling approaches are quantified and addressed. Additionally, a comprehensive analysis of modeling error trends with converter parameters is presented, which demonstrates the effectiveness of the proposed method over conventional methods. Finally, using the proposed modeling approach, a numerical optimization routine is proposed to find the optimal-conduction-loss modulation trajectory. The effectiveness of the method is verified by experimental testing on a 1 kW, 230–28 V fully GaN-based single-phase DAB ac–dc converter.
17 April 2025 in IEEE Transactions on Industry Applications
This paper presents the small-signal modeling of an LCC-S compensated multiphase inductive power transfer (MIPT) system using the Extended Describing Function (EDF) method. The system incorporates three-phase electromagnetic coupler powered by a three-phase 2-level voltage source inverter. The implementation of an LCC compensation network at the primary side provides a constant coil current in the primary coil and ensures load-independent gain characteristics. Additionally, the necessary mathematical formulations for deriving the small-signal model using EDFs are thoroughly detailed. Based on this analysis, the open-loop transfer function between the duty cycle and the output voltage of the system is formulated. Furthermore, the LCC-S MIPT system's controller parameters are designed to ensure stable dynamic performance. The simulation results for the linearized model are presented for open-loop and closed-loop operations. Finally, the approach is experimentally validated on a scaled-down MIPT system prototype, and the results demonstrate the functionality of the designed parameters and controller.
30 April 2025 in IEEE Journal of Emerging and Selected Topics in Power Electronics
Traditionally, silicon-based (Si) reverse-blocking (RB) switches are employed in current-source inverters (CSIs), but they suffer from high conduction losses, limited switching frequency, and bulky designs. In contrast, four-quadrant (FQ) switches based on wide bandgap (WBG) materials, such as gallium nitride (GaN) and silicon carbide (SiC), offer reverse-voltage-blocking capability with significantly lower conduction losses, making them attractive for efficient CSI applications. This study focuses on the H7 topology CSI, where an additional (S7) switch provides a shunting path for the DC-link current, enabling zero-current switching (ZCS) to (S1a - S6a) switches. The conventional switching schemes for the H7 topology split the zero state into four segments, leading to frequent switching transitions and elevated switching losses. A new switching scheme is proposed, which optimally arranges vectors to reduce switching transitions that eventually reduce switching losses. The effectiveness of the proposed scheme in comparison with the conventional scheme is evaluated through loss and efficiency analysis using PLECS software for various CSI topologies (3−ϕ, 400 V, 8 kW). Further, the hardware validation is conducted for the proposed switching scheme on H7 CSI using FQ switches. The experimental results are validated on a 1.2 kW laboratory prototype, demonstrating improved efficiency over conventional schemes.
1 January 2026 in IEEE Journal of Emerging and Selected Topics in Power Electronics
1 January 2026 in IEEE Transactions on Transportation Electrification
1 January 2026 in IEEE Journal of Emerging and Selected Topics in Industrial Electronics