1 January 2026 in IEEE Transactions on Transportation Electrification
8 May 2026 in IEEE Journal of Emerging and Selected Topics in Industrial Electronics
In recent times, with the availability of GaN technology, it's important to consider its usage in EV drives, particularly in two-wheelers, which require low voltage and high current (LVHC). This paper presents a comparative analysis of power loss and efficiency among various 2-level inverter topologies (Si-IGBT, Si-MOSFET, SJ-MOSFET, SiC-MOSFET, GaN (GS66516T)) and 3-level Neutral Point Clamped (NPC) inverter topologies (Si-IGBT, Si-MOSFET, SJ-MOSFET, SiC-MOSFET, GaN (GS66516T), EPC GaN) for LVHC integrated motor drives, employing two different $\frac{dv}{dt}$ filter configurations: a diode-clamped LC (DCLC) filter and an RLC filter. The comparison is carried out in the PLECS platform for a 120 V, 8 kW, 50 Hz induction motor. Simulation results indicate that the Si-MOSFET-based 2-level inverter without a $\frac{dv}{dt}$ filter exhibits higher efficiency up to 4.6 kW. Beyond this operating point, the EPC GaN-based 3-level NPC inverter with a DCLC-based $\frac{dv}{dt}$ filter demonstrates superior efficiency compared to other configurations. Experimental investigations are conducted on the same motor at a loading condition of 1.2 kW for selected 2-level and 3-level inverter configurations. The experimental results confirm the trends observed in the simulations, showing a similar pattern in power loss and efficiency across the tested configurations.
22 January 2026 in IEEE Transactions on Industrial Electronics
Integrated motor drives are traditionally used to mitigate the voltage-doubling effect, which can damage motor winding insulation. However, when powered by wide band gap (WBG) devices, these drives still face the challenge of high slew rates at the motor terminals. To address this challenge, $\boldsymbol{dv/}\boldsymbol{dt}$ filters are used to effectively reduce the voltage slew rate at the motor terminals in WBG-based integrated motor drives. This article proposes a new LRCC -based $\boldsymbol{dv/}\boldsymbol{dt}$ filter for WBG device-based inverter-fed integrated induction motor drive. To design the proposed filter optimally, a Pareto optimization is performed, considering losses, volume, and $\boldsymbol{dv/}\boldsymbol{dt}$ error (the deviation between the actual $\boldsymbol{dv/}\boldsymbol{dt}$ achieved and the target $\boldsymbol{dv/}\boldsymbol{dt}$ for which the filter is designed). An algorithm is proposed that outlines the procedure to design an optimal $\boldsymbol{dv/}\boldsymbol{dt}$ filter. Additionally, a comparison is drawn to evaluate total system losses between the proposed LRCC and other $\boldsymbol{dv/}\boldsymbol{dt}$ limitation techniques. The proposed filter exhibits superiority in terms of losses as compared with other $\boldsymbol{dv/}\boldsymbol{dt}$ limitation techniques. The proposed approach is validated for a 2.2 kW, 415 V induction motor drive fed from a 650 V, 30 A gallium nitride (GaN) device (GS66508T) based inverter.