This paper evaluates the technical feasibility of integrating an offshore wind energy conversion system (WECS) into a floating production storage and offloading (FPSO) unit. The WECS is situated closer to the Brazilian mainland, requiring a 150 km long subsea umbilical cable for the integration with the FPSO unit. High voltage alternating current (HVAC) transmission is mandatory due to the substantial water depths, introducing challenges such as power losses and significant reactive capacitive current generated by the cable. This paper proposes a comprehensive approach to dealing with these challenges. Firstly, the umbilical cable section is sized based on ampacity and maximum current under short-circuit conditions. A power flow optimization is thus employed to determine the optimal transmission voltage that minimizes power losses. The optimization results define the reactive power that the back-to-back converter of the WECS must absorb based on the active power. This relationship is represented as a lookup table control, which ensures efficient operation by adjusting the reactive power reference in the WECS power control unit. Using this approach, the WECS back-to-back converter compensates for a portion of the reactive power generated by the umbilical, reducing the need for additional infrastructure such as shunt reactors or reactive compensation substations. Each component of the system is modeled, and a complete simulation is conducted using MATLAB/Simulink to validate the proposal. The results demonstrate the effectiveness of this approach in enhancing system efficiency while significantly reducing carbon dioxide emissions during oil and gas exploration through the integration of WECS with FPSO units.
This work proposes a new transmission line emulation system designed to test the performance of subsea power electronics systems within a power hardware-in-the-loop (P-HIL) framework. The emulator is composed of cascaded lumped-parameter line equivalent sections, where all resistors of the transmission line electric model are replaced by regenerative power converters. These are employed to emulate a given behavior of relatively wide frequency band loss free resistors. Thus, most of the ohmic losses in a given test setup are avoided and the energy can be injected back to the grid. Furthermore, this emulator allows to reproduce the most significant harmonics including some of the resonance effects in the system under test. Many challenges and relevant topics of power electronics are discussed. These include high performance converters, power ripple across the dc-link of the ac-dc rectifiers, state of the art gallium nitride (eGaN) power devices, and the proposed control structure.
Este artigo apresenta o estudo de duas topologias de conversores CC-CC não isolados com elevado ganho estático, baseadas na associação e na integração dos conversores Boost modificado e SEPIC. A topologia associada possui dois interruptores controlados, enquanto a integrada emprega apenas um. Com a integração, obtém-se a célula de comutação conhecida como \(R^2P^2\). Os conversores propostos são capazes de alcançar ganhos de tensão elevados (\(>8\)), sendo ideais para aplicações que demandam poucos componentes e uma conexão comum entre entrada e saída, o que simplifica o circuito de controle e comando. O artigo apresenta os detalhes da derivação das topologias e o princípio de operação, incluindo as etapas e principais formas de onda, além da análise comparativa com conversores semelhantes, previamente propostos na literatura. Para validar as análises, dois protótipos com potência nominal de 200 W, projetados para operar com tensão de entrada de 26 V e tensão de saída de 260~V são apresentados. Ambos operam com frequência de comutação de 50~kHz, atingindo rendimentos de 93,4~\% para o conversor associado e 89,2~\% para o conversor integrado em potência nominal.
Floating Production, Storage, and Offloading (FPSO) units are electric energy intensive systems and are typically fed by gas turbine generators and, thus, have a large operational carbon footprint. Floating offshore wind turbines (FOWT) can be a way to generate electricity in a more sustainable way for such isolated power systems, but their feasibility depends on a number of factors, such as technology and environmental conditions. This work introduces a feasibility analysis tool designed to evaluate the energy potential of regions where FOWTs might be beneficial. The methodology is based on a statistical analysis of wind data to derive an analytical model of wind incidence. This model serves as input for the proposed tool, which integrates a detailed representation of the wind energy conversion system (WECS), including the FOWT, permanent magnet synchronous generator (PMSG), back-to-back power converter, and transmission lines. The tool outputs key performance metrics, including wind statistics, capacity factor, mechanical and electrical powers, energy generation potential, and greenhouse gas (GHG) emission reduction, offering valuable insights into the economic, environmental and technical viability of wind energy resources integration into FPSO units. A case study is presented which shows the analysis of the energy potential in one of the leading oil basins of the pre-salt fields on the Brazilian coast, highlighting its applicability to future offshore renewable energy projects.
Anais do XIV Seminário de Extensão e Inovação & XXIX Seminário de Iniciação Científica e Tecnológica da UTFPR - SEI/SICITE (978-65-272-0788-7) - Sistema De Aquisição Automatizado Para Caracterização De Circuitos Eletrônicos Analógicos