The low-temperature thermoelectric performance of Bi-rich n-type Mg3(Bi,Sb)2 was limited by the electron transport scattering at grain boundaries, while removing grain boundaries and bulk crystal growth of Mg-based Zintl phases are challenging due to the volatilities of elemental reactants and their severe corrosions to crucibles at elevated temperatures. Herein, for the first time, we reported a facile growth of coarse-grained Mg3Bi2-xSbx crystals with an average grain size of ~800 μm, leading to a high carrier mobility of 210 cm2 · V−1 · s−1 and a high z of 2.9 × 10−3 K−1 at 300 K. A $$\Delta$$ T of 68 K at Th of 300 K, and a power generation efficiency of 5.8% below 450 K have been demonstrated for Mg3Bi1.5Sb0.5- and Mg3Bi1.25Sb0.75-based thermoelectric modules, respectively, which represent the cutting-edge advances in the near-room temperature thermoelectrics. In addition, the developed grain growth approach can be potentially extended to broad Zintl phases and other Mg-based alloys and compounds.
Wearable inorganic semiconductor (ISC) based thermoelectric (TE) devices, especially fiber-based thermoelectric textiles (TETs), show promise in electrical power generation and solid-state cooling compared with bulk ISC-based TE generators (TEGs). However, it is challenging to use the ISCs, with brittleness and mechanical instability, to produce thermoelectric fibers for weaving TETs. Here, we report a strategy to produce ISC-based segmented hierarchically ternary coaxial TE strings at large scale for semi-automatically manufacturing a highly mechanically stable, stretchable, breathable and washable woven TET by a textile machine. The TET demonstrates good stretchability (100% elongation), flexibility (bending radius of 2 mm), washability (>20 washing cycles) and output power density of 0.58 W m−2 at a temperature difference of 25 K (predicted power density of 6.06 W m−2 at ΔT = 80 K). With the assistance of finite element analysis, the significance of the fabric’s structure on the excellent mechanical and TE performance of the TET has been clarified, which reaches an output voltage of ∼0.28 V at an ambient temperature of ∼8 °C. For practical applications, it can continuously power on-body electronics for monitoring the environment and the human body’s vital signals and activities by wearing it on the arm with a self-built temperature gradient of ∼16 K. Furthermore, the TET can stably generate solid-state cooling of 3.1 K in quiescent air (Tambient ∼ 26 °C, relative humidity ∼60%). This work paves a new way for designing durable, stretchable and washable ISC-based TETs toward real on-body applications.
Organic semiconductors (OSCs) are attractive for fabrication of thermoelectric devices with low cost, large area, low toxicity, and high flexibility. In order to achieve high‐performance organic thermoelectric devices (OTEs), it is essential to develop OSCs with high conductivity (σ ), large Seebeck coefficient (S), and low thermal conductivity (κ ). It is equally important to explore efficient dopants matching the need of thermoelectric devices. The thermoelectric performance of a high‐mobility donor–acceptor (D–A) polymer semiconductor, which is doped by an organic salt, is studied. Both a high p‐type electrical conductivity approaching 4 S cm−1 and an excellent power factor (PF) of 7 µW K−2 m−1 are obtained, which are among the highest reported values for polymer semiconductors. Temperature‐dependent conductivity, Seebeck coefficient and power factor of the doped materials are systematically investigated. Detailed analysis on the results of thermoelectric measurements has revealed a hopping transport in the materials, which verifies the empirical relationship: S ∝ σ−1/4 and PF ∝ σ1/2. The results demonstrate that D–A copolymer semiconductors with proper combination of dopants have great potential for fabricating high‐performance thermoelectric devices.