30 October 2018 in MATEC Web of Conferences
The paper proves the scheme and proposes a technique of engineering calculation of the working element for layer-by-layer soil-free tillage in conditions of insufficient moisture. Soil treatment causes significant changes in the volume ratio of the solid, liquid and gaseous phases influencing the chemical, physico-chemical and biological processes, accelerating or slowing down the rate of synthesis and destruction of organic matter. Soil cultivation creates favorable physical conditions for soil fertility. It continues to be one of the most important ways to control weeds, pests and diseases of crops. However, the use of known working elements for soil cultivation does not allow to intensify all the factors ensuring the increase and reproduction of effective fertility. The most effective way to achieve this can be the use of a working organ that decompresses the lower horizons, providing differential crumbling of soil layers, creating a mulch layer on the surface and increasing erosion resistance, i.e. layer-by-layer loosening. This improves the structure of the soil, moisture accumulation and aeration of the root layer, which activates the processes of nitrification and will allow plants to use additional nutrients.
29 June 2020 in E3S Web of Conferences
Operating devices for soil cultivation in arid conditions should not carry the lower layers to the surface of the field, since this leads to the loss of moisture due to its evaporation. Purpose of work is to determine the moisture content in the soil after using new operating devices. There been developed technique of determining the moisture content in the soil after exposure to operating devices by studying the movement of soil layers in the vertical direction and comparing their moisture. The movement of soil in the vertical direction is quantified by a comparative study of the moisture content in the upper and lower layers of the treated formation before and after exposure to operating devices. Using appropriate equipment, there were determined the moisture content in the most susceptible to evaporation surface layer of 0–5 cm and then the average value of the layer-by-layer measurement up to a depth of 25 ÷ 35 cm, depending on the selected operating modes of the operating device.
30 March 2022 in Engineering Technologies and Systems
Introduction. The technological operation of seed sowing is a main in the seed selecting and growing process. The correct execution is the most important agrotechnical requirement for seeding machinery for selecting and primary seed breeding. The purpose of the study is to determine the main agronomic indicators of the Demetra selection seeder. Materials and Methods. In the study, the methods of a full-scale experiment in laboratory and field conditions were used. The main agro technical indicators of the technological process of sowing seeds by a seeder were determined. Results. As a result of the study, there were determined the main agronomic indicators of the seeder such as its minimum and maximum productivity and the effective seeding rate, departure from the specified seeding rate, irregularity of seed sowing through the seed tubes, instability of total seed sowing, seed crushing, seed sowing depth at optimum coulter penetration depth, quantity of seeds embedded at the specified depth, ridge height after the aggregate passed, and number of sprouts and relative field germination rate. Discussion and Conclusion. It has been found that the Demetra seeder with high accuracy provides qualitative performance of sowing specified number of seeds with both the minimum (1.95 m) and maximum (32.92 m) length of the plot. The departure of the actual seeding from the specified seeding is 0.02‒0.54% for different crops. Unevenness of seeding is 0.22‒1.53% for different crops. At the same time, the instability of total seeding varied in the range of 0.1‒1.1% for different crops. The height of ridges after the seeder passed is 2.6‒3.0 cm. There were no seeds not embedded in the soil by the working bodies of the seeder. Relative field germination of cultivated crops is 82.3‒96.9%.
1 January 2021 in Engineering Technologies and Systems
Introduction. One of the areas of agricultural production is crop production. At the same time, it is necessary to take into account all available possibilities of reducing the energy consumption and labor required for tillage operations that can be achieved by using energy efficient tillage tools. Materials and Methods. In the course of the research, an agrotechnical and energy assessment of the technological process of soil cultivation performed by tillage tools was carried out. The agrotechnical assessment includes identifying the indicators of unevenness of the tillage tool travel depth, soil pulverization, ridging, and the content of erosion threatening particles. As an energy assessment, the indicator of draught created by a tillage tool was taken. The researches were carried out for various configurations of the chisel cultivators with flat and curved hoes, and elements made of polymer. Results. The data of agricultural assessment and draught of chisel cultivators were obtained for various agricultural backgrounds: winter wheat stubble with preliminary disking in one track, winter barley stubble with preliminary disking in one track, and autumn fallow on the background. Discussion and Conclusion. According to the results of the research, it was found that, in terms of quality indicators, the tillage tools meet the agrotechnical requirements for a given processing depth of 25-35 cm. The operation of the chisel equipped with a curved hoe is characterized by the highest presence of clods up to 5 cm (91-96%). The ridge height was 6.8-8.0 cm for all tillage tools. It has been established that the tillage tools are advisable to be uses for anti-erosion soil cultivation. In terms of preserving plant and crop residues, a chisel with a curved hoe providing their content by 9.5-28.6% more than with a polymer of 13.2-14.3%. The chisel with polymer has the smallest draught of 7.6 kN, which is 18.28% lower in comparison with tillage tools equipped with a flat hoe.
28 September 2020 in TAURIDA HERALD OF THE AGRARIAN SCIENCES
S“State Scientific Establishment “Agricultural research center “Donskoy” (SSE “ARC “Donskoy”)
State Scientific Establishment “Agricultural research center “Donskoy” (SSE “ARC “Donskoy”)