18 June 2019 in IEEE Transactions on Circuits and Systems I: Regular Papers
A computationally efficient data pre-distorter suitable for the 16 amplitude and phase-shift keying (APSK) constellation transmitted through a memoryless non-linear power amplifier is introduced. The proposed method is based on estimating the optimum value of the ring ratio that enables compensation for the power amplifier (PA) distortion occurring at each input back-off (IBO) level of a memoryless behavioral model. Previous results for data pre-distortion rely on iterative numerical optimization techniques which require increased computational resources. Instead, the proposed approach is numerically efficient and further provides insight on the generation of non-linear distortion. Computed and measured bit-error rate (BER) results for 16-APSK in additive white Gaussian noise (AWGN) channel and the presence of a PA are presented to prove the validity of the method. The performance evaluation of the pre-distorter based on a measured non-linear characteristic of a commercial power amplifier showed a BER reduction of up to four orders of magnitude at low IBO levels.
13 April 2022 in IEEE Access
Future broadband satellite communication (SatCom) systems require a high throughput of data transmission, which calls for operation at higher frequency bands. Adaptive coding and modulation (ACM) technology has been considered as a means to obtain improved performance further at these frequencies. However, the ACM protocols in current DVB-S2 and DVB-S2(X) standards do not take the effects that arise from the non-linear link with memory into account, which is generated by the cascade of a high-power amplifier (HPA) and digital root raised cosine (RRC) filters. This paper first reveals the non-linear characteristics of the SatCom link, and transfers this into an equivalent full-linear link with an additive noise source thanks to the pre-distortion algorithm. Using this equivalent modeling, an approach of selecting/adapting the optimum coding, modulation scheme and associated system configurations for a given channel fading level is proposed. Both simulations and experimental test-bed performance are presented to validate the proposed method.