In order to formalize and extend on previous ad-hoc analysis and synthesis methods a theoretical treatment using vector representations of directional modulation (DM) systems is introduced and used to achieve DM transmitter characteristics. An orthogonal vector approach is proposed which allows the artificial orthogonal noise concept derived from information theory to be brought to bear on DM analysis and synthesis. The orthogonal vector method is validated and discussed via bit error rate (BER) simulations.

A novel dual-band printed diversity antenna is proposed and studied. The antenna, which consists of two back-to- back monopoles with symmetric configuration, is printed on a printed circuit board. The effects of some important parameters of the proposed antenna are deeply studied and the design methodology is given. A prototype of the proposed antenna operating at UMTS (1920-2170 MHz) and 2.4-GHz WLAN (2400-2484 MHz) bands is provided to demonstrate the usability of the methodology in dual-band diversity antenna for mobile terminals. In the above two bands, the isolations of the prototype are larger than 13 dB and 16 dB, respectively. The measured radiation patterns of the two monopoles in general cover complementary space regions. The diversity performance is also evaluated by calculating the envelope correlation coefficient, the mean effective gains of the antenna elements and the diversity gain. It is proved that the proposed antenna can provide spatial and pattern diversity to combat multipath fading.

Backscatter communication is an emerging paradigm for pervasive connectivity of low-power communication devices. Wirelessly powered backscattering wireless sensor networks (WSNs) become particularly important to meet the upcoming era of the Internet of Things (IoT), which requires the massive deployment of self-sustainable and maintenance-free low-cost sensing and communication devices. This article will introduce the state-of-the-art antenna design and radio frequency (RF) system integration for wirelessly powered backscatter communications, covering both the node and the base unit. We capture the latest development in ultralow-power RF front ends and coding schemes for $\mu \text{W}$ -level backscatter modulators, as well as the latest progress in wireless power transfer (WPT) and energy harvesting (EH) techniques. Newly emerged rectenna system, waveform design, and channel optimization are reviewed in light of the opportunities for adaptively optimizing the WPT/EH efficiency for low-power signals with varying conditions. In addition, advanced device packaging and integration technologies in, e.g., additively manufactured RF components and modules for microwave and millimeter-wave ubiquitous sensing and backscattering energy-autonomous RF structures are reported. Inkjet printing for the sustainable and ultralow-cost fabrication of flexible RF devices and sensors will be reviewed to provide a prospective insight into the future packaging of backscatter communications from the chip-level design to complete system integration. Finally, this article will also address the challenges in fully wireless powered backscatter radio networks and discuss the future directions of backscatter communication in terms of “Green IoT” and “Low Carbon” smart home, smart city, smart skin, and machine-to-machine (M2M) applications.

Recently, reconfigurable intelligent surface (RIS), which operates with the aim to manipulate multi-path signals, has been widely considered for wireless communications. In this letter, we extend the employment of RIS to indoor positioning, with the aid of ultra-wideband (UWB) technique. Moreover, the Cramér-Rao lower bound of the developed positioning scheme is quantified. Both theoretical analysis and simulation results demonstrate that RIS has the potential to realize accurate positioning with a single access point, due to its ability to mark the channel and replace traditional active positioning anchors. Moreover, it is also depicted that when the number of receive antennas is limited, time-of-arrival based positioning has a higher accuracy than that based on angle-of-arrival, due to the high multipath resolution of UWB signals.

This paper presents a thorough experimental study on key generation principles, i.e., temporal variation, channel reciprocity, and spatial decorrelation, through a testbed constructed by using wireless open-access research platform. It is the first comprehensive study through: 1) carrying out a number of experiments in different multipath environments, including an anechoic chamber, a reverberation chamber, and an indoor office environment, which represents little, rich, and moderate multipath, respectively; 2) considering static, object moving, and mobile scenarios in these environments, which represents different levels of channel dynamicity; and 3) studying two most popular channel parameters, i.e., channel state information and received signal strength. Through results collected from over a hundred tests, this paper offers insights to the design of a secure and efficient key generation system. We show that multipath is essential and beneficial to key generation as it increases the channel randomness. We also find that the movement of users/objects can help introduce temporal variation/randomness and help users reach an agreement on the keys. This paper complements existing research by experiments constructed by a new hardware platform.

An orthogonal vector approach is proposed for the synthesis of multi-beam directional modulation (DM) transmitters. These systems have the capability of concurrently projecting independent data streams into different specified spatial directions while simultaneously distorting signal constellations in all other directions. Simulated bit error rate (BER) spatial distributions are presented for various multi-beam system configurations in order to illustrate representative examples of physical layer security performance enhancement that can be achieved.