1 July 2017 in Journal of Structural Engineering
Engineering research is undergoing dramatic changes with novel, large-scale research facilities being developed to help reduce the growing economic losses associated with natural disasters. The wall of wind (WOW), at Florida International University (FIU), is such an experimental facility, capable of simulating hurricane winds and wind-driven rain to better understand hurricane effects on buildings and other infrastructure. The WOW has been designated by the national science foundation (NSF) as one of the experimental facilities (EFs) under the natural hazards engineering research infrastructure (NHERI) program, which aims to allow researchers to enable innovations and help prevent natural hazards from becoming societal disasters. The WOW EF’s goal is to facilitate research to improve design practices for structural systems, building envelopes, and lifeline infrastructure. This paper presents an overview of the design and development of the WOW research facility and delineates its capabilities to assess and mitigate the impacts of hurricane wind, rain, and debris on civil infrastructure. Advantages and limitations of the facility are explained. To illustrate the EF’s research capabilities, details and results from three recent case studies related to large-scale and full-scale testing of building components and traffic infrastructure are described.
1 October 2018 in Journal of Structural Engineering
The dependency of wind forces and responses on the outer shape of tall buildings provides a unique opportunity to reduce wind effects through the aerodynamic optimization of the outer shape. The current study presents a multiobjective aerodynamic optimization procedure (AOP) by introducing horizontal openings to reduce wind load. The adopted method joins an optimization algorithm, large eddy simulation (LES), and an artificial neural network (ANN) surrogate model. The base building geometry is the Commonwealth Advisory Aeronautical Research Council (CAARC) building. The present optimization process is carried out by introducing three openings along the height of the building. However, the adopted method is useful for any shape modifications. In all cases, opening volumes are maintained at 10% of the total building volume to enable a simple comparative performance assessment. The objective of the optimization process is to identify the optimal aspect ratio and distances between the openings that produce the best aerodynamic performance. Three optimization problems are presented. The first two follow single-objective optimization to reduce the peak base moment coefficients about the - and -directions, respectively. Reductions of 47% and 42% are achieved for the moments about the - and -directions, respectively. The third optimization is a multiobjective optimization problem, which aims to simultaneously reduce the two base moments.
1 June 2022 in Physics of Fluids
Wind-turbine wakes over two-dimensional (2D) hills with different slope gradients are systematically investigated using large-eddy simulation with wind turbine parameterized as actuator disk model and hilly terrain modeled by immersed boundary method. The chosen hill models represent typical hilly terrains with and without flow recirculation in the wake of the hills. The flow characteristics of wind-turbine wakes [including mean velocity, wake-center trajectory, turbulence statistics, and mean kinetic energy (MKE) budgets] and the power performance are analyzed, and the related flow mechanisms are elucidated in our study. It is found that the velocity deficit in turbine wakes cannot be acceptably represented by the Gaussian model in the wake of the steep hill until at a further distance. It is also found that the assumption that the wake-center trajectory maintains a nearly constant elevation downwind of the hilltop proposed by Shamsoddin and Porté-Agel [“Wind turbine wakes over hills,” J. Fluid Mech. 855, 671–702 (2018)] may not be applicable in particular for the steep hill cases. Furthermore, the hilltop is the optimal location for turbine placement because the turbine harvests more wind energy due to the speed-up effect and suffers less fatigue loading due to the lower turbulence levels. Both the turbulence levels and the magnitude of vertical turbulent flux are found to drop below those of the flat ground case on the windward side of the hills, and they also decrease within the hill wake region compared with the no-turbine cases. A detailed analysis of MKE budgets reveals that the budgets of pressure transport and mean convection are mainly responsible for balancing the MKE in turbine wakes over hilly terrain.
1 September 2021 in Journal of Wind Engineering and Industrial Aerodynamics
1 October 2020 in Journal of Structural Engineering
The use of timber panels to construct the lateral and gravity load resisting systems of tall mass-timber buildings makes them lightweight and less stiff than buildings made from conventional construction materials. As a result, frequent exposure to wind-induced oscillations could cause discomfort to the occupants. This study examines the dynamic response and serviceability-performance of five case study tall mass-timber buildings varying in height (10-, 15-, 20-, 30-, and 40-story). In the assessment, the case study buildings are structurally designed according to the 2015 National Building Code of Canada and CSA O86-14 standard. High-frequency pressure integration wind tunnel tests are conducted to obtain floor-by-floor aerodynamic wind load time histories. Dynamic structural analyses in the frequency domain are performed to calculate the peak floor accelerations for various levels of critical damping ratios, wind directions, and exposure conditions. For validation and to include the possible motion-dependent effects, such as aerodynamic damping, aeroelastic wind tunnel tests are also carried out on the model of the 40-story tall mass-timber building. A base-pivoted two-degrees-of-freedom stick type aeroelastic model is designed and built to simulate the dynamic response of the prototype building in its two fundamental sway modes of vibration. Overall, it is shown that the dynamic response of tall mass-timber buildings under wind excitation is strongly dependent on the height, structural damping, local turbulence intensity, and wind direction. Based on the case studies, recommendations regarding the habitability of mass-timber buildings, critical height limit, and mitigation strategies for wind-induced excessive motions are forwarded.